oscam files,

There are 7 replies in this Thread which was already clicked 1,901 times. The last Post () by predator.

    [account]
    user = test1
    pwd = test2
    disabled = 0
    uniq = 0
    group = 1
    au = mysmartreader
    caid = 0963:000000
    monlevel



    [reader]
    label = mysmartreader
    enable = 1
    protocol = smartreader
    device = 003:002
    caid = 0963
    boxid = 0000000
    detect = cd
    mhz = 600
    cardmhz = 600
    group = 1
    emmcache = 1,3,2
    ecmcache = 1
    lb_weight = 100
    blockemm-unknown = 1
    blockemm-s = 0
    blockemm-g = 1
    blockemm-u = 0

    I have the exact same problem


    [account]
    user = test1
    pwd = test2
    group = 1,2
    monlevel = 4
    au = slyuk
    caid = 0963
    cccmaxhops = 0
    cccreshare = 0
    keepalive = 0


    [reader]
    label = slyuk
    protocol = mouse
    detect = cd
    device = /dev/ttyUSB0
    emmcache = 1,3,2
    caid = 0963
    boxid = xxxxxxxxx
    blockemm-u = 0
    blockemm-s = 1
    blockemm-g = 1
    blockemm-unknown = 1
    mhz = 357
    cardmhz = 357
    ident = 0963:000000
    group = 1


    Any help on this

    • Official Post

    Any other blockemm will cause problems updating, try adding only the two blockemm`s highlighted below.


    [reader]
    label = slyuk
    protocol = mouse
    detect = cd
    device = /dev/ttyUSB0
    emmcache = 1,3,2
    caid = 0963
    boxid = xxxxxxxxx
    blockemm-g = 1
    blockemm-unknown = 1
    mhz = 357
    cardmhz = 357
    ident = 0963:000000
    group = 1

    I have this done.. Do i have to restart oscam to see if it takes it ... Everything else is wroking a dream except for this..


    Thanks for the reply too

    pred your files look spot on . also notice that you are allowing unique & shared emm's which is the proper way. I am certain something in the emm process has changed and i'm sure those of you running that card as local will find out soon enough . As i said before oscam/mgcam for updating is best


    new2

    Dont forget to hit the thanks button!!!!!!!!!!!!!



    :41_002:



    Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility. Viewing Pay TV without a valid subscription is illegal. !! Linuxsat-Support.com cannot be held responsible for the content of any information stored or posted on this forum.

    back again.. ok friend said his card updated last night oscam/cccam. these are his files,,

    Just a little update - I have a ***UK card and using debian linux OSCAM latest build server and CCcam 214 clients and my entiltements just updted last night no problem. I have provides my config files below as they might be of some help.


    [global]
    logfile = /emu/log/oscam.log
    emmlogdir = /emu/log/emm.log
    nice = -1
    maxlogsize = 30
    waitforcards = 0
    saveinithistory = 1
    dropdups = 1


    [monitor]
    hideclient_to = 15
    appendchaninfo = 0


    [cccam]
    port = xxxxx
    version = 2.1.4
    nodeid = 8020634567103213C0


    [webif]
    httpport = 8888
    httpuser = xxxxxxx
    httppwd = xxxxxx
    httpallowed = 127.0.0.1,192.168.0.1-192.168.0.20



    [reader]
    label = slot1
    protocol = smargo
    device = /dev/ttyUSB0
    caid = 0963
    boxid = xxxxxxx
    detect = cd
    mhz = 580
    cardmhz = 357
    group = 1
    emmcache = 1,3,2
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 0
    blockemm-unknown = 0




    [account]
    user=xxxxxx
    pwd=xxxxxxxx
    group=1
    cccmaxhops=5
    cccreshare=-1
    caid=0963
    au = slot1

  • master G

    Set the Label from UK OSCam to Videoguard2 Cards OSCam

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login