CCcam VPS local how to

Try using oscam as card reader on your DM7020, create an n line with 256 trick and use it on your vps in germany which will need CCcam 2.1.3.

Depending on what image you are using on DM7020, it may be possible to download oscam from the addons panel. If there`s not we can find an alternative for you. Lets us know which card you would like to share to your VPS and we can find the configs for you..

You will find oscam in this pack HERE for gemini enigma2, follow IPK installation method from HERE. Try to install oscam on DM7020 and CCcam2.1.3 on your VPS, that will give us some time to create the configs for you buddy..

Yes, this version is the best to use with oscam, any of the versions after this wont show your card as local, it will show hop 10. Can you tell us which encryption your canal+ card uses, is it seca or viaccess ?

The oscam files that need editted are found in folder /etc/tuxbox/config. I`ve attached them so you can replace with whats already there. You will need to open port 34000 & 15001 in your router for the n lines to work. Most important thing to do is change the user and passwords in oscam.user to your own and match them to the n line, i`ve hightlighted them for you.

Oscam.conf

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120




[newcamd]
Key = 0102030405060708091011121314
Port = 34000@0100:006C




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols




[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
CacheDelay = 120
logfile = /usr/local/etc/oscam.log




[newcamd]
Key = 0102030405060708091011121314
Port = 15001@0500:032820




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols

oscam.server

[reader]
Label = TV Vlaanderen
Protocol = internal
Detect = cd
Device = /dev/sci0
EMMCache = 1,3,2
Group = 1
CAID = 0100
ident = 0100:006C




[reader]
label = CSAT
Protocol = internal
detect = CD
device = /dev/sci1
Group = 2
EMMCache = 1,3,2
CAID = 0500
ident = 0500:032820

oscam.user

[account]
user = [COLOR='#00FF00']test1[/COLOR]
pwd = [COLOR='#00FF00']test2[/COLOR]
group = 1
AU = TV Vlaanderen




[account]
user = [COLOR='#FFFF00']test3[/COLOR]
pwd = [COLOR='#FFFF00']test4[/COLOR]
group = 2
AU = CSAT

Top slot TV Vlaanderen
N: 127.0.0.1 34000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Bottom slot CSAT
N: 127.0.0.1 15001 test3 test4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Quote from BigBear46

Hi, I know this channel is years old but I have exactly the same problem.
I want to forward my CCCam server from Oscam on Raspberry Pi to a Debian VPS with CCCam.x86 on it (not sure which version). I created an user in oscam login is user, password is test. cccam Port is 11111, dyndns is asdf.dyndns.org
Is it right to add the following line in the cccam.cfg on the vps?
N: asdf.dyndns.org 11111 user test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

To let users connect to that vps I just add C lines in the cfg on the vps and my card will appear as hop1 for them, right?
How can I check which cccam version it is on my vps?

Port 11111 should be your newcamd port in oscam to connect like this.

Quote from BigBear46

oscam.conf says:
[cccam]
port = 11111
serverip = 192.168.178.29
nodeid = 5A34B8DA10B6XXXX
version = 2.3.0
stealth = 1
keepconnected = 0

newcamd isnt even configured there (i'm not using it).

Edit: Or do you mean i have to configure newcamd on port 11111? :D

Display More

If you want to connect by nline to your vps then yes that should be your newcamd port, If you are also using CCcam protocol on your oscam server then you will need to choose another port as both cannot be the same. If all the oscam server is doing is connecting to the vps then you can remove the CCcam section from your oscam.conf.

Quote from BigBear46

So would this N line work?
N: asdf.dyndns.org 22222 user test 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

With this oscam.conf:
[newcamd]
port = 22222@0000:022222
serverip = 192.168.178.29

[cccam]
port = 11111
serverip = 192.168.178.29
nodeid = 5A34B8DA10B6151A
version = 2.3.0
stealth = 1
keepconnected = 0

Friends I know good are connecting directly to my cccam server so i still need it.

Display More

No, first look here & find examples of working configs for whatever card you have.
Oscam configs for all packages

If you need nore help after this then post your oscam configs and it will be much easier to guide you.

Quote from BigBear46

My sly de v13 Card works via cccam 2.3.0 on my solo2 in intranet with those settings:
Oscam.server
[reader]
label = sly
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
ident = 09C4:000000
group = 1
emmcache = 1,3,2
ndsversion = 2

Oscam.user
[account]
user = user
pwd = test
group = 1

[account]
user = solo2
pwd = AmzYQNJ9
monlevel = 4
au = sly
group = 1

Display More

Ok enable newcamd in oscam.conf

[newcamd]
port                          = 22222@09C4:000000
key                           = 0102030405060708091011121314
keepalive                     = 1

and make the user account this,

oscam.user

[account]
user                          = user
pwd                           = test
group                         = 1
caid                          = 09C4
ident                         = 09C4:000000
keepalive                     = 1

Open port 22222 and you should be connected.