Hello
Running 1.20-unstable_svn build r9202 on a Raspberry installed after the guide here. Card Reader: Infinity USB unlimited
2 Cards works in original box but get the following error when I try to Raspberry r:
Error activating card.
Any
[global]
logfile = /usr/local/etc/log/oscam.log
disableuserfile = 0
nice = -1
maxlogsize = 200
preferlocalcards = 1
usrfile = /usr/local/etc/log/oscamuser.log
emmlogdir = /usr/local/etc/log
lb_savepath = /usr/local/etc/log
lb_nbest_percaid = 04:1
[cache]
[cccam]
port = xxx
nodeid = 274EEF361xxxxx
version = 2.1.4
reshare = 1
forward_origin_card = 1
[newcamd]
port = 9999@093E:000000
key = 0102030405060708091011xxxxxxx
keepalive = 1
mgclient = 1
enabled = 1
au = 1
user = dvbapi_cccam-3
boxtype = pc
[monitor]
port = 988
aulow = 120
monlevel = 0
hideclient_to = 0
[webif]
httpport = xxx
httpuser = oscam
httppwd xxxxx
httprefresh = 10
httpallowed = 127.0.0.1,255.255.255.255,255.255.255.255,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 0
reader]
label = V*****
enable = 1
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 093E
boxid = xxxxxxx
ins7e11 = 15
detect = cd
ident = 093E:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
audisabled = 1
auprovid = 00093E
2014/01/16 18:38:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9202 (arm-linux-gnueabihf)
2014/01/16 18:38:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2343
2014/01/16 18:38:02 0 s couldn't open statistics file: /usr/local/etc/log/oscamuser.log
2014/01/16 18:38:02 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/01/16 18:38:02 0 s signal handling initialized
2014/01/16 18:38:02 0 s monitor: initialized (fd=4, port=988)
2014/01/16 18:38:02 0 s newcamd: initialized (fd=5, port=9999)
2014/01/16 18:38:02 0 s -> CAID: 093E PROVID: 000000
2014/01/16 18:38:02 0 s cccam: initialized (fd=6, port=1xxx)
2014/01/16 18:38:02 0 s Viasat [mouse] creating thread for device /dev/ttyUSB0
2014/01/16 18:38:02 0 s loadbalancer: can't read from file /usr/local/etc/log
2014/01/16 18:38:02 0 s waiting for local card init
2014/01/16 18:38:02 10399D0 h webif: decompressed 55194 bytes back into 163800 bytes
2014/01/16 18:38:02 10399D0 h HTTP Server running. ip=0.0.0.0 port=xxx
2014/01/16 18:38:02 10378C0 r Viasat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/01/16 18:38:04 0 s init for all local cards done
2014/01/16 18:38:04 0 s anti cascading disabled
2014/01/16 18:40:51 10378C0 r Viasat [mouse] card detected
2014/01/16 18:40:54 10378C0 r Viasat [mouse] Error activating card.
2014/01/16 18:41:03 0 --- Skipped 2 duplicated log lines ---
2014/01/16 18:41:03 10378C0 r Viasat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/16 18:41:03 10378C0 r Viasat [mouse] card initializing error