i have ***box f3 bricked ( 2 box ) i tried to upgrade box using cable RS232 but both box not working as tutorial in this forum...maybe my box is the clone box...so maybe expert members in this site can guide me to recover my box back... thanks in advance :)
My ***box f3 bricked (need help)
- mustherg
- Thread is marked as Resolved.
-
which firmware did you flash it with
also box must be turned off until you see the message "Synchronizing STBs...please reset target!". Once you see this, then you turn on the power to the box.
-
-
are you selecting the .abs file that was within the download?
-
are you sure you have a null cable as null and serial look the same but flashing will not work unless its a null rs232 cable
-
slybox bricking is pretty rare now they are very forgiving .
good place for firmware please make sure firmware is for your model box
-
Are you sure you are using the right firmware.
Their is firmware for F3 or is yours the F3S both are different. -
-
-
master G
Moved the thread from forum Openbox Support to forum Openbox | Skybox.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
