I hope someone may be able to help. I am trying a basic setup on a newly purchased xpeed lx2.
I get to the configuring the tuner A and B stage and then come to a halt. The problem is that
A sets up fine but B keeps coming up as nothing connected. I am setting configuring mode as simple.
Next mode as DISEqC A/B, Port A shows 28.2E Eutalsat etc Port B shows nothing connected. I have
swapped over the double feed in from the sat dish to no avail. As you can tell I am a complete novice
who has bought a set top box with little support at the moment.
Problem with basic set up
- franceene
- Thread is marked as Resolved.
-
-
So what is it your trying to achieve mate.
Is it the same sat on both tuners?? i.e. 28.2e -
Yes that is it then hopefully I can set up an external hard drive and record a program whilst watching
another one. -
Just guessing here, but if you have a twin LNB with two feeds from it and a twin tuner, why do you need a diseqc switch?
Just take it out and set tuner A equal to tuner B. -
When I try to set it up in that mode I get no channels showing.In tuner configuration it shows Tuner A DVB-S2 INTERNAL(DVB-S2) equal to tuner B.
Tuner B DVB-S2 NIM(DVB-S2) equal to tuner A
I then try on auto scan and manual scan which show Nothing to scan. Please setup your tuner settings before you scan. -
Add the attached channel list and setup both tuners the same as how it is in the image below..
-
I have channels now.Thank you all for your help. If I cannot find out the info I need to set up my xpeed lx2 and need further guidance(if offered of course)
is this the correct forum to ask. -
master G
Moved the thread from forum Golden Interstar XPEED Support to forum Xpeed LX1 * LX2. -
master G
Moved the thread from forum Xpeed LX1 * LX2 to forum Golden Interstar Xpeed - All Models.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!