Hi all .... I'm pulling what's left of my hair out lol ...... I've got a vu+ duo with hard drive installed using vix.... Ok my prob is I can record but can't watch another channel ..... I'm using my old *** dish with a 8 x lnb I've got multi room so I've got two *** boxes running fine and my vu box .... I've tried every setting on the vu box no joy , at present I'm set to A tuner on simgle on 28e Astra and single on tuner B I've tried loop through and same equal to A ...... What am I doing wrong I've read every post on loads of forums but with no result .... Anyone got an easy step by step set up for this headache of mine lol ..... Oh I'm using twin cables to all boxes .......
Two channel record and watch
- splat01
- Thread is marked as Resolved.
There are 19 replies in this Thread which was already clicked 2,220 times. The last Post () by abu baniaz.
-
-
Can you confirm that you have two cables connected to tuners?
If you do, can you try disabling one tuner at a time and check that the other cable/tuner/lnb port is fine.
-
Done all that and yes I twin cables going into all boxes......... I've tried changing cables around too .... I'm really stumped
-
Dose it work on FTA channels ??
Done all that and yes I twin cables going into all boxes......... I've tried changing cables around too .... I'm really stumped
-
Dose it work on FTA channels ??
Yes mate I can record fta ... -
Yes mate I can record fta ...
I have the same issue on openatv 4.0 and 4.1 and the latest openHDF would imagine that vix is the same as they all share the same gui. Flash an older image from about 6 months ago and I bet you're able to record fine. ....
im trying to get to the root cause of the issue will share the fix once resolved. ..others may already know a fix but I can't find anything about it online. ....???? -
I have the same issue on openatv 4.0 and 4.1 and the latest openHDF would imagine that vix is the same as they all share the same gui. Flash an older image from about 6 months ago and I bet you're able to record fine. ....
im trying to get to the root cause of the issue will share the fix once resolved. ..others may already know a fix but I can't find anything about it online. ....????
Cheers matey I did have BH on with the same problem -
Have you got a reshare enabled on the line you're using? IE from your peer? If not it won't work....
if you are okay watching / recording 2 fta channel at the same time it's not a tuner issue. It's either softcam or like I am saying an issue with all images. i have this problem on both of my xpeed lx2 boxes but the amiko alien is fine.... -
Have you got a reshare enabled on the line you're using? IE from your peer? If not it won't work....
if you are okay watching / recording 2 fta channel at the same time it's not a tuner issue. It's either softcam or like I am saying an issue with all images. i have this problem on both of my xpeed lx2 boxes but the amiko alien is fine....I'm new to all this so it's a big learning curve for me lol ....not sure what softcam is , do I need to install it ? ....or is it already in vix?...... Hope I'm not becoming a pain
-
I've found my soft cam/ci nothing in common interface or assignment or soft cam manager ...
-
I'm asking my provider but I've found in soft cam that available share is 1
-
You need to do a lot of reading mate.....your problem is probably a lot simpler than what I have. You don't have a tuner issue. ....
-
I'm on it now ..... Just buggered something up lol ..... Sbox+Cccam2.1.3 and now nothing works lol ..... Put back to Cccam 2.3.0 but no pic even after enigma2restart aghhhhhhhh lol
-
It's not the softcam. It's the details in the softcam as provided by your peer has he/she alowed you to use 2 boxes or in your case 2 tuners.
Remember we do not support pay servers on this forum.
. -
Thanks for your help ...... I've sorted out my picture problem .... Removed my cams through tspanel then re-installed cccam then my nline ....... Working agn now ..... Just waiting for response from my provider..... Thanks agn and yes I'm learning abt what's allowed and not ...... And abt my vu box.... All good fun
-
An N Line and your provider...... it's not sounding very good here buddy. Please if you haven't done so already read the forum rules here: Forum Rules
We do not offer support to people who use payservers.... never have & never will.
-
Read and understood sorry
-
Could this not be something to do with the server you are connected to that is only allowing single ecms..if it is then there is a way around that but you would need permission from whoever you get your share from..i have never had this problem so i am just speculating.
-
Ok I'm all sorted ...... This is how I've set my vu+ duo with a one tb hard drive fitted......... Tuner A set to simple ..... Mode set to DiSEq A/B ........ Port A 28.2e 28a & Astra 2am/2e/2f (all depends on what sat you use). Port B same asA......... Voltage 22khz (yes) ...... Send DiSEqC only satellite change (yes). Save these changes move onto tuner B .... Configuration mode .. Loop through to .... Connected to tuner A and save ..... This works for me .... Hope this helps others as it took me awhile to work out .....
-
If it works for you then I'm happy for you.
However, for the benefit of others who may read this thread...
Why setup a diseqc switch when there isn't one involved?
Loop through has limitations.
Granted that there are the odd receivers with drivers that require send diseqc to be set to "yes", the rest can leave it at the deafult value of "no"I attach a graphical representation of each tuner having a cable from the satellite dish and what each tuner tuner should be set to. Slight differences in images but principle is same (latest OE images have revamped the GUI).
Enigma2 DVB - FBC - USB Tuners
Enigma2 Tuners. Articles, Downloads and Support for DVB-S2 Tuners, DVB-S2X Tuners, DVB-C/T2 Tuners, DVB-C USB Tuners, DVB-T/T2 USB Tuners, DVB-T/T2/C USB Tuners, FBC Tuners, and Tuner Drivers.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!