sly card not updating

There are 6 replies in this Thread which was already clicked 1,428 times. The last Post () by canthackit.

    hi all if any can help my sly bt card not updating here is my config any ideas




    [global]
    nice = -1
    logfile = /var/log/oscam.log
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 120
    bindwait = 120
    resolvedelay = 30
    serialreadertimeout = 1500
    maxlogsize = 10
    waitforcards = 1
    preferlocalcards = 1
    saveinithistory = 1
    keepalive = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httprefresh = 15
    httpallowed = 192.168.1.000 - 255.255.255.255
    debug = 255


    [newcamd]
    key = 0102030405060708091011121314
    port = xxxxxx@0963:000000




    [reader]
    label = ***uk
    protocol = smartreader
    detect = cd
    device = 006:002
    blockemm-g = 1
    blockemm-unknown = 1
    saveemm-u = 1
    saveemm-s = 1
    emmcache = 1,3,2
    group = 1
    caid = 0963


    [account]
    user = admin
    pwd = admin
    group = 1
    au = ***UK
    caid = 0963

    sorry mg oscam 9584
    2014/07/14 22:35:01 F8B1E0 r ***uk [smartreader] Reader initialized (device=006:002, detect=cd, mhz= AUTO, cardmhz=369)
    2014/07/14 22:35:01 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9584 (x86_64-linux-gnu-libusb-pcsc)
    2014/07/14 22:35:02 F8B1E0 r ***uk [smartreader] card detected
    2014/07/14 22:35:02 F8B1E0 r ***uk [smartreader] init card at 369 mhz
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] autospeed = 1
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
    2014/07/14 22:35:06 F8B1E0 r ***uk [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
    2014/07/14 22:35:07 F8B1E0 r ***uk [smartreader] Card type: SYAV
    2014/07/14 22:35:07 F8B1E0 r ***uk [smartreader] Rom version: 40LF
    2014/07/14 22:35:07 F8B1E0 r ***uk [smartreader] Credit available on card: 0 euro
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] Region Code: SW4
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] Pincode read: 7476
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] PCB settings: 3F 0 E 0
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] type: ********** B***B (0963), caid: 0963
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] serial: ########, BoxID: ########, baseyear: 1997
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] ready for requests
    2014/07/14 22:35:08 F8B1E0 r ***uk [smartreader] found card system ***********
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] card detected
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] type: ********** B***B (0963)
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: 0003, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: 000b, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: 001d, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: 005b, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: 005c, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b765, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b766, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b772, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b773, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b860, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:08 F8B1E0 r ***uk [***********] tier: b996, expiry date: 2014/08/12-01:00:00
    2014/07/14 22:35:13 0 s init for all local cards done
    2014/07/14 22:35:13 0 s anti cascading disabled
    2014/07/14 22:35:13 FB6280 c client connected to xxxxx port
    2014/07/14 22:35:13 FB6280 c anonymous disconnected from 127.0.0.1
    2014/07/14 22:35:16 FB80E0 c client connected to 10059 port
    2014/07/14 22:35:16 FB80E0 c encrypted newcamd:xxxxx-client 127.0.0.1 granted (xxxxx, au=off)
    2014/07/14 22:35:16 FB80E0 c user xxxxx authenticated successfully (CCcam)
    2014/07/14 22:35:16 FB80E0 c AU disabled for user xxxxx
    2014/07/14 22:35:31 F8B1E0 r ***uk [***********] Not a valid ecm
    2014/07/14 22:35:31 FB80E0 c xxxxx (0963&000000/FFFF/1979/5F:BBE573D11672C363B6FD987C530E0ABC): not found (1 ms) by ***uk - Alibi
    2014/07/14 22:35:37 FB80E0 c xxxxx (0963&000000/FFFF/0F50/85:EFFC058B1B413D7E97254541D499EC2A): found (115 ms) by ***uk
    2014/07/14 22:35:47 F8B1E0 r ***uk [***********] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2014/07/14 22:35:47 FB80E0 c xxxxx (0963&000000/FFFF/0F1F/85:8907911C81C72EB9AAFF016389AAA947): not found (107 ms) by ***uk - Cartoon Network
    Switch Debug from 0 to 0 1 2 4 8 16 32 64 128 256 512 1024 2

    With that expiry date I wouldn't be too worried just yet buddy.... give it another week at least to see if the emm comes through....

    fI7WHhv.png


    Please click on the "Like" :thumbup: button if you find the information and support posted on the forum helpful.

    Not sure if this is a typo or what but:



    You have caps for reader label in au but not in actual reader label (These should be identical)..



    Also m8, add this line to your [global]

    Code
    emmlogdir                     = /var/log/


    Then check the logfile every few days for any activity..


    You should also be blocking shared EMMs in the reader for that card..

    Code
    blockemm-s                    = 1



    Try this reader





    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

    Edited 4 times, last by thatfellow ().

    @ thatfellow


    sorry to intercede here but seeing as my sub never updated last time around that was using oscam/mgcamd, i'm hoping i can do it soon for my next updates so i'm now trying oscam r9842 alone.


    upon looking at your suggestion i notice that you have 2 options for shared emm's you have entries for both blocked and saved, and i atm have shared and unique enabled what is you suggestion for this setting?


    [reader]
    label = ***uk
    protocol = smartreader
    detect = cd
    device = 006:002
    caid = 0963
    ident = 0963:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-s = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1
    audisabled = 1
    auprovid = 000963


    also can you please enlighten me on the last 2 entries.


    audisabled 1
    auprovider 000963

    as i have never seen these options before.


    thanks & regards: canthackit

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login