Flashed bootloader and now the box shows No CA found

tru01 · Jul 21st 2014

I connected to the Dreambox via http and flashed this, and now the box shows No CA found, What to do now?

New ssl for the Version2 800SE sim2.2

**master G** · Jul 21st 2014

More info needed as to why this has happened.. Do you definitely have a V2 dm800se sim 2.2 ? Which image was previously installed or which were you trying to install ? Did you flash image first then the bootloader immediately after ?

tru01 · Jul 21st 2014

Just unpacked this box from the package, brand new DM800HDSEV2 original from trusted supplier.

Wanted to install Enigma2 so I downloaded the latest version 4.0.11.
Connected the box via http, box shows: DM800SEv2 second stage loader #88 (2013-05-01)
and tried to flash with the newnigma2_stable_dm800_v4.0.11.nfi
Got failure WRONG ARCHITECTURE error

Read on the forum that I needed a second stage loader so i flashed with SSL88A_seV2.nfi
Now box shows No CA found

Downloaded Dreamup133_11 and release-dm800sev2-4.0.0.nfi
Box is now showing completed uploading file to box
next message is: box is flashing from its memory and have been doing this for 1 hour

Really appreciate your quick response!

**master G** · Jul 21st 2014

Quote

newnigma2_stable_dm800_v4.0.11.nfi

Be careful which image you flash on to your receiver buddy.. You flashed an image for DM800 on a DM800SE V2, that`s why you got no ca error.. Only use images for DM800SE V2.

Quote

DM800SEv2 second stage loader #88 (2013-05-01)

Your receiver already has the latest bootloader, so no need to flash it again..

Put the receiver into flash mode and flash this image via a browser window ==> OpenATV

http://images.mynonpublic.com/….1-dm800sev2-20140616.zip

DM800 HD se Flashing firmware by Browser

tru01 · Jul 21st 2014

Flashing box via browser window is no longer working, display only shows R01:no ca found,
no stop message or IP address.
Can I use Dreamup for this?, it is connecting to the box

**master G** · Jul 21st 2014

You could use dreamup, but it takes ages to flash. Try this tool instead ==> Dreambox OptiFlasher Enigma2 EDition Latest Version

File

JapharFlasher by GoodSat

This is the original DreamUp modified to work with ALL SIMs, for Clones and Originals. Will work with Ferrari Sim, Japhar Sim, A8P Sim, and Sim2 Sim as well as the Original Sims.

master G

Mar 5th 2019

D · Jul 21st 2014

turn box off the there is a small button on back hold this in while turning box on , then reflash with a suitable image via web browser

suchtreasure · Jul 21st 2014

This same issue i was having.....have you tried dreamup sunray? and make sure you flash your firmware first

tru01 · Jul 22nd 2014

Thank you all for the good tips!
Turned out that I had several issues to deal with. Using win7 64bit and having the Dreamup stored on a shared HD was not a good idea.
The Dreamup was not working correctly. When copying the original image and Dreamup to my desktop it finally worked.
I restored the original image and then used the web interface to flash OpenATV.

After recovering from this nerve wrecking event :-)
What is in your opinion the best image for DM800HD se V2 ?

D · Jul 22nd 2014

i personally use tsimage

tru01 · Jul 24th 2014

Thanks for the tip D, I will give tsimage a try, as I experience bad sync with video and sound in some of the channels with Openatv

rami · Jul 24th 2014

hi, have try OPEN PLI image ?

D · Jul 25th 2014

no open pli for dm800se v2 i have found

**mckee25** · Jul 25th 2014

Try this link buddy: http://linuxsat-support.com/view.php?pg=openpli

D · Jul 25th 2014

cant see dm800se v2 the v2 being the stumbling block

Flashed bootloader and now the box shows No CA found

master G Jun 13th 2020

Participate now!

Share

Tags