drhd d15 / bricked

There are 8 replies in this Thread which was already clicked 1,589 times. The last Post () by Serafeim.

    hello, thanks for the reply, i got the the firmware from a deiseldo "information" thread the firmware was posted by digi 247 on the 10-12-2012 in DR D15 (support) can you tell me how do i load the firmware you recommend onto a dead box through the RS232 port ---- -:
    Following on from my previous post you are in luck the Patched firmware for the D15 has now been released, I am unsure if you need to flash the Module_002p as well as my Grand triple has everything built into the main patch. But this could be sue to the size for the F15 the firmware patches where around 5mb the Grand triple are around 60mb.

    Anyway here it is please let us know how you get on.

    Regards



    Attached FilesD15_wifi_101p.rar (3.67 MB, 73 views)

    Try this make sure you have the FW on a pen drive and plugged in


    Disconnect the receiver from AC power supply. (Use the power switch on the back panel.)
    Press the MENU button on the front panel, and keep it pressed.
    Switch AC on.
    You will see 4 lines on blue background.
    Now you can release the Menu button and select the line you want

    the DR D15 was new out of the box,there was power on the box till i loaded the firmware that i put in the reply earlier,after i loaded the firmware there was no power,if its not called bricked what should we call it ? any suggestions f*cked maybe ?

    Loading firmware would not cause power failure in the box. It may be a coincidence that the power supply happened to fail at that point. Sounds like a return to the supplier to me.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login