Hi,
I have spents many hours trying to set up server using ubuntu and am at the point where i have ubuntu 10.04 installed, cccam+oscam installed. I am using a smargo connected directly in to the pc and it seems to be reading the sly card as it shows 1 card in the ccam server and clients are connecting but showing 0 cards, so i think the issue maybe cccam and oscam not connectiing to each other.I can log into both servers.from oscam log "connection closed to client, cccam disconnected from 127.0.0.1, thread ********".
Would really appreciate any input on thi, thanx in advance
clients cant connect
- wizzy
- Thread is marked as Resolved.
-
-
How did you install oscam + CCcam, was it separate or an automated script for both as a combo ?
-
Don't know much about oscam, but just a simple question, is the listen port open and have you set it to the ip of the pc?
-
You can see the card in cccam info but your clients see 0 cards, is this correct ?
If yes how are you making your flines. -
hi,
it was the auto install tutorial from here http://linuxsat-support.com/li…-installation-ubuntu.html .Listen port is open, static ip set. In server tab it shows one card although the entitlements tab shows nothing. The flines have been copy n pasted from the cfg file in my dm500 which I have been using as my server.In cccam server I can see clients who are connected to me. -
hi,
it was the auto install tutorial from here http://linuxsat-support.com/li…-installation-ubuntu.html .Listen port is open, static ip set. In server tab it shows one card although the entitlements tab shows nothing. The flines have been copy n pasted from the cfg file in my dm500 which I have been using as my server.In cccam server I can see clients who are connected to me.This is good it means the card is being read by oscam
To check entitlements in oscam
In your web browser type
E.G 192.168.0.9
Click Readers
Then view entitlements
How have you made the flines
e.g F user password 2 0 0 { 0:0:2 } { } { } peers dns -
ok, the reader shows the entitlements. the lines were made with ccam line manager e.g C: wizzy.dyndns.org 55555 below 10 F: below 10 0 0 0 { 0:0:1 }
I only have flines for clients in cccamcfg, do I need to put them somewhere else?? Something in my head is telling me i need to put 1 fline somewhere else, sure I read it somewhere -
ok, the reader shows the entitlements. the lines were made with ccam line manager e.g C: wizzy.dyndns.org 55555 below 10 F: below 10 0 0 0 { 0:0:1 }
I only have flines for clients in cccamcfg, do I need to put them somewhere else?? Something in my head is telling me i need to put 1 fline somewhere else, sure I read it somewhereThis will allow them to view your local only with no reshare, if they are using a pc server or have
minimum downhops 1
enabled in their own box cccam.cfg this will explain why they cannot see your card.
Change it to 0 0 0 { 0:0:2 } and ask your peer if they can now see the card. -
Someone should edit what looks to be a boxkey in the OP?
-
Someone should edit what looks to be a boxkey in the OP?
deleted what I think you were talking about, although its not my boxkey. Dont know if they are relevant to it though
-
This will allow them to view your local only with no reshare, if they are using a pc server or have
minimum downhops 1
enabled in their own box cccam.cfg this will explain why they cannot see your card.
Change it to 0 0 0 { 0:0:2 } and ask your peer if they can now see the card.
done what you suggested but still no joy.Been at this since 5:30 am. I only have family/friends connecting to me using dm500/800's and their boxes are soleley used as a client.
Cheers for all the help, its been a very long day and need to sorted for my hols tomorrow. -
dont know if it is useful but clients dm800 shows connected to server but zero cards
-
Are you managing to watch on your own receiver via your new server?
-
I'm a little confused here. You can see your friends connected to you but no cards showing. Do you mean your frinds can't see your card, or you can't see any cards from your friends?
-
Hi ddaddy, sorry for late reply I have been on hols.My friends are connected to my server but they aren't seeing my card. My own 2 local shares on my recievers arent able watch channels via my new server.
I think I may have the answer which I will try out when I have more time. I changed the x86ccam 2.13 file for x86 2.14 in the cccam + oscam auto install package. Will post back when I have a chance to try it out again. -
just an update, tried again today and it seems to be okay. Many thanx for all the help
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!