When I add ":16001" to the address of my Dreambox ip I get a "web browser can not connect"....
CCCam installation on DM800HD SE
-
- Various Support
- omarzinho71
- Thread is marked as Resolved.
There are 36 replies in this Thread which was already clicked 14,649 times. The last Post () by omarzinho71.
-
-
Then CCcam is not running, try the attached version of CCcam, restart enigma2 then FTP the CCcam.cfg to /usr/keys folder, start CCcam 2.3.0 in softcam manager..
-
I did all of that, still not working and the web address of cccam.info still can not connect. Shall I reflash open ATV clean and start all over again by downloading only the plugin above and came.cfg above? I might have messed up my install downloading too many plugins?
-
Probably best to start fresh and only install the CCcam and CCcam.cfg from above. If you still have problems i can take a look on teamviewer later buddy.
-
Thanks a lot man, really appreciate your patience. will do that and keep you posted.:48_002:
- - - Updated - - -
IT ALL WORKS. THANK YOU SO MUCH!!!! Reinstalled everything clean and it works like a charm. DONE RESOLVED. Anyone having a problem with CCCam and DM 800 follow this procedure. Flash Open ATV and then download the two files just above and paste your c lines in the CCCam.cfg. No need for TSPanel. Master G, you ROCK!
-
Hi Master G, I am trying to set up softcam for a friend, he also has dm800 se and open pli 2.1, the automatic download of softcam did not work, what is the best way to do manually?
-
Hi Master G, I am trying to set up softcam for a friend, he also has dm800 se and open pli 2.1, the automatic download of softcam did not work, what is the best way to do manually?
Use the attached version..
Here are a number of different ways to Install:
1. Telnet - FTP .ipk to tmp/ folder > Paste this command into Telnet and press enter
2. FTP - FTP .ipk to /tmp folder > Install from image menu, on the remote control press Menu > Plugins > Software Management > Install Local Extension
3. USB - Copy .ipk to a USB stick > Insert into receiver > Follow On Screen Instructions
-
Installed this and when rebooted the box, ftp'd the cccam.cfg file in the etc folder but it did not show the plugin in the softcam menu of the box.
-
Try CCcam from here => OpenPli softcam collection
-
tried the 2.3.0 all from there and still nothing...
-
tried the 2.3.0 all from there and still nothing...
You could try TSPanel or upgrade to the latest Openpli image, then you can download CCcam from the image plugin menu / feeds.
-
You could try TSPanel or upgrade to the latest Openpli image, then you can download CCcam from the image plugin menu / feeds.
Dear OM,
Some members is not familiar using DCC. :44_002::44_002:We can using this way:
1. Blue botton->PP Panel->Softcams->choose CCcam 2.29 (maybe 2.30 is not working).
2. Menu->Plugin->press red botton (Manage extentions)->Softcams.How to send a cccam.cfg to STB:
1. Click DCC
2. Your cccam.cfg like here c: petruk.com 12000 handsome boy
3. Put your cccam.cfg on drive C or D
4. Copy Cccam.cfg to STB on directory /etcHow to using CCcam:
1. Blue botton on remote control->Softcam setup
2. Choose CCcam 2.29 or others series.
3. Restart CCcam.How to watching Ccam is alive:
1. Menu - plugin - CCcam info
2. Click server
3. If appears GREEN it is working
4. If appears RED it is not working. You can contact your friend:14_002::fire2:
-
Thank you guys! it worked using the new pli image as suggested by master G. Now rolling:thumb:
-
after reeding all this post hi believe you got this IMAGE Enigma2 2011-11-10-3.2, Image: Release 3.2.1 2011-11-10
that is a DMM CVS IMAGE 1.6 M8 on that IMAGE you need to install (enigma2-plugin-extensions-multicammanager_0.1-r0_all.ipk) once is istalled you will found on menu/softcammanger
and then the softcam if you look on section you will found the softcammanager and cam us well -
Guys can you give me the 2.2.1 ipk link my 2.3.0 got corrupted
-
you should already have it from previous posts ,,every bit of needed info is on previous posts..
-
It seems I can not install came 2.2.1 on new openpli image. can you guys please confirm?
- - - Updated - - -
Guys, I have removed the 2.3.0 plug in and trying to install 2.2.1. Have tried TSPanel and the manual install ipk from soft cam collection and for some reason I can't seem to be able to download the 2.2.1....Please help anyone? I would hate to have to refresh my image
Your resource for CCcam softcam
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
