Multi CardServer b7-r35
-----------------------
**fixed high cpu usage
multics ( CSP + CCcam connector )
-
- MultiCS
- RelookPVR
- Thread is marked as Resolved.
-
-
Multi CardServer beta7 Revision36
---------------------------------
*Changed select() function causing all problems by poll() function. -
Multi CardServer beta7 Revision37
---------------------------------
*Removed ecm DEADLOCK.
*fixed low cache hits.
+changed config file monitor by inotify().
+added webif restart button.
+added webif last debugged lines.
*cfg and log file names are no more fixed and they are taken from executable file name. if your multics file name is "multics1" or "multics1.x32", the config file should be "/var/etc/multics1.cfg" and the log file "/var/tmp/multics1.cfg". -
MultiCS b7-r38
Multi CardServer beta7 Revision38
---------------------------------
*fixed clients/servers connection.
*fixed command line bug. -
Multi Cardserver r50
--------------------
-Removed beta from version name (multics is always in beta state)
-Removed Gbox Server and Radegast Server
*fixed freecccam bug
*fixed ecm request checking
*fixed and improved dcw filter
*fixed cccam card selection and uphops priority
*fixed config comment and line-continuation(\) parser
+Added editor in webif to edit config file.
+Changed all clients/servers actions (recv/send) to multithreads
+Added Profile Options to accept or deny zero sid/provider/caid
+Added more profiles default options
+Added clients(cccam/mgcamd) extra info, added clients enddate thread
+Block any incoming/outgoing cache data if at least one of the next fields is zero "ecmTag,sid,caid,ecmHash"
+Added dcw rejected list.
+Added "next dcw" detection algorithm to avoid the use of wrong and random dcw (test only for CCcam clients)
**see readme.txt for more details -
-Removed beta from version name (multics is always in beta state)
-Removed Gbox Server and Radegast Server
*fixed freecccam bug
*fixed ecm request checking
*fixed and improved dcw filter
*fixed cccam card selection and uphops priority
*fixed config comment and line-continuation(\) parser
## the next 2 lines are identical
N: localhost 4444 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: localhost \ # Host
4444 \ # Port
user \ # Username
pass \ # Password
01 02 03 04 05 06 07 08 09 10 11 12 13 14 # DES key+Added oscam-cccam program detection
+Added editor in webif to edit config file.
+Changed all clients/servers actions (recv/send) to multithreads
+Added Profile Options to accept or deny zero sid/provider/caid (0:deny/1:accept).by default all are accepted
ACCEPT NULL CAID: 0 # deny all incoming ecm with zero caid (ex. 0000:032830:0180 {CAID:PROV-ID:SID} )
ACCEPT NULL SID: 0 # deny all incoming ecm with zero sid (ex. 0500:032830:0000)
ACCEPT NULL PROVIDER: 0 # deny all incoming ecm with zero provider-id (ex. 0500:000000:0180)+Added more profiles default options
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW TIME: 0
DEFAULT DCW TIMEOUT: 5500
DEFAULT DCW MAXFAILED: 10
DEFAULT SERVER MAX: 0
DEFAULT SERVER INTERVAL: 1000
DEFAULT SERVER TIMEOUT: 3500
DEFAULT SERVER VALIDECMTIME: 2000
DEFAULT RETRY NEWCAMD: 0
DEFAULT RETRY CCCAM: 0
DEFAULT CACHE TIMEOUT: 300+Added clients(cccam/mgcamd) extra info, added clients enddate thread
F: user pass { 5501 5502,5503 }
F: user pass { profiles=5501 5502,5503; } # this is the same as previous line
F: user pass { profiles=5501 5502,5503; name=My friend name; } # + full name of the client
F: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; } # + this user is only allowed to connect from the host "myfriend-host.org"
F: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; enddate=2013-04-05; } # + this user will be inactive at 6 April 2013 00:00## Predefined names are ('profiles', 'name', 'host', 'enddate') there can be added more as extra info.
F: user pass { profiles=5501 5502,5503; name=My friend name; email=friendemail@host.com }## the previous options are also available for mgcamd clients
MGUSER: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; enddate=2013-04-05; }+Block any incoming/outgoing cache data if at least one of the next fields is zero "ecmtag,sid,caid,Hash"
+Added dcw rejected list.
BAD-DCW: FD FF FF FB FD FF FF FB FD FF FF FB FD FF FF FB
BAD-DCW: 00 01 02 03 00 01 02 03 00 01 02 03 00 01 02 03+Added "next dcw" detection algorithm to avoid the use of wrong and random dcw
Attached Files -
MultiCS r53
Multi CardServer r53
--------------------
*restored r38 main process code.
*restored gbox & radegast servers.
*fixed cache thread (the main problem causing high cpu usage)
*incoming cache data from r50/r51 are blocked (r50/r51 multithreaded code can send wrong DCW).
*added global option to block/accept all incoming and outcoming cache data with networkid=0 (ACCEPT NULL ONID: 0/1). -
multics r54a
Multi CardServer r54a
--------------------------------
- fixed host-name list on config changed.
- fixed cache failed replies and stats.
- added sending cache resendreq packet when waiting for cache data to get faster reply.
- new option to make you cache server acting like a tracker (see multics.cfg)
- new peer option to block sending invalid onid requests (see multics.cfg)
- multi-threaded and dynamic webif with ajax.
- fixed cccam client disconnection when there is a new connection with a wrong pass.
- check/remove wrong and similar dcw on same channel.
- added new target systems (not tested)thx to evileyes
-
multics r55
Multi CardSerer r55
----------------------------
- added multiple cws line.
- removed extra cache packets (forwarded hits+resendreq) causing instability to server when increasing the number of cache peers and setting new cache peer option to send forwarded hits.
- fixed mgcamd server ( tested on samsat hd65 titan ).Thx to evileyes.
-
MultiCS r56a [HR][/HR] Multi CardServer r56a
------------------------------
- thread safe ecm data
- fully multi threaded clients/servers messages (low ecmtime) -
Multi CardServer r59
- restored r55 maincode and removed multi threaded part -
Multi CardServer r62
Code- changed database structure to speed up card search (removed sidlist page) - removed delay from cache server all multics versions are beta
multics.r62.zip (484.9 KB)
multics.r62.zip
__________________ -
Multi CardServer r63
Code- accelerated cache server - fixed mgcamd enddate - enabled radegast client - enabled freecccam server - added cccam server option "CCAM PROFILES" to set default profiles for all clients - added mgcamd server option "MGCAMD PROFILES" to set default profiles for all clients - added profile option "DISABLE NEWCAMD" to disable sending ecm to newcamd servers - added profile option "DISABLE CCCAM" to disable sending ecm to newcamd servers - added profile option "DISABLE RADEGAST" to disable sending ecm to newcamd servers - added profile option "DISABLE CACHE" to disable receiving dcw from cache
-
Hi,i would like to know what is diffrent betwen multics and csp and who have better cache for example for nds card?Regards
-
Hi,i would like to know what is diffrent betwen multics and csp and who have better cache for example for nds card?Regards
I haven't used either to be honest, but I think the clue is in the title - 'multics ( CSP + CCcam connector )' multics is used to connect to CCcam, which isn't possible by just using CSP.
Your best of reading through both, starting with CSP and reading it a segment at a time, it helped me and that is saying something. If you only have a small number of peers, its not something you need to worry about really, it helped me understand and thats is saying a lot!
-
I tried both them csp/multics bounding both with cache exhange and works fine.
-
Multics.cfg with already created profiles and a list of ECMs Bad
-
MultiCS r66
Hi all,Changes in this version
Fixed:
* channelinfo file parser
* xml bug
* reading config file bug
* more checks on incoming newcamd packetsAdded:
+ I***** chid within sidlist (profiles/servers)
+ option sid list for servers
+ option sharelimits for servers and clients (like original CCcam)
+ selective debug output
+ faster and fully config update
+ country flags in webpage
+ external stylesheet file
+ webpage autorefresh
+ standalone newcamd page
+ multiple CCcam serverssee multics.cfg for howto.
-
-
Multi CardServer r68
-------------------------
fixed cache send messages
fixed cache send request in tracker mode
removed delays from main thread
fixed timeout for sending ecmthis version is available only for x32 and x64 arch
Other Not Listed Softcam Support Forum
Configs, discussion, downloads and guides for Other Not Listed Softcams - CSP, DreamOS, GBox, NEWCamd, MultiCS, OSCam Smod, OSCam Ymod, SUpcam & Wicardd.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!