rigrat1 -read these posts -although its for a gemini image ,the setup is basically the same: http://linuxsat-support.com/en…g-cccam-gemini-image.html
you know that you can use either dreambox edit or dreamset to put an up to date channels settings list or simply scan the sat.
to install CCcam -download the version you want to use and ftp it to the appropiate folders for example : http://linuxsat-support.com/cc…ls/386-cccam-2-1-4-a.html or the e1-CCcam_2.1.4_100204.tar.gz both are also in the posts.
then add the lines needed etc in the .cfg. If its only going to be used as client then no need to open ports.
s** C****
-
- Various Support
- rigrat1
- Thread is marked as Resolved.
-
-
No extra charge for me, they said that all hd subs with multi room will get upgraded for free after September 1st, mine took 4 days but some may take longer, got an old hd box for £30 and sorted boxkey and hey presto!!
-
been trying to install this image as recomended by glenview where am i going wrong peeps it all goes well but its just a basic pli version with no cccam or channels ect could someone talk me throught the prosess ? installed flash wiz pro drag image then press flash and were done but its like theres all the bits missing from the image also should the reciver be unpluged before i start or on ?
You have described the correct process for flashing but something has obviously went wrong, try using the .img version of that image with dreamup.
-
ok ten i used the img and dream up and all ok now the box looks like your screen shots now lol one thing i dont understand is lots of the channels dont work for example bbc1 itv ect i can do anything with the s** chanels till tonight and my m8 brings his c*** down any idea why they dont work the screen shows details but no pic?
-
Try flashing a new bouquet mate...
-
they´ve probably changed PIDs ,you need to update the settings like I stated in previous post as I thought that was your intial problem ;)
-
sorry caz i have never put a bouquet on a box before is it done in dream up or dcc please
-
well thats done it lol i flashed the image again from ten again and when it got to the end of the prosses it said error somthing 32 is not equal to local 32 and now the box wont switch on completly dead and help greatly recived? pls
-
try reflashing again m8.
-
Why did you flash the image again?
All you needed to do was download bouquets from the server or upload with dreamboxedit?
Flash another image using a null modem cable m8...
-
dream up cant see the box now only two green lights inside i think its meet its maker lol
-
Keep turning it on and off at the mains for a bit...
If nothing happens leave it off for a bit and retry..
There is an erase image for the 500s in the image section, so if you get Dreamup to recognise it use that or another good image...
-
right lets start again i have flashed tens image onto my dads dm500s and its all ok scanned the sat and have my channels again right im waiting for my friend to bring down the Ca** when i look at the confiq from tens image i dont want to use port12000 can i change to any i want in the confiq does this afect occam? also do i just write lines as normal c: f: ect in the confiq file the router is open and port forward ok and workin fine so whats the next stage and the n line in the confiq whats that all about please?{ Ps anyone wana dead box lol }
-
Ok so change the listen port to whatever is open on your router..
Do not alter the cfgs otherwise, i.e. leave the N-line...
Just add c's and f's etc..
Remember know you need to forward the port to that reciever and not the server you already have...
-
yes thats done m8 so just put in the ca** and restart box i take it so is it that easy also do i monitor using cs studio as normal
-
Yup mate simple as that...
Will be around later if you need a hand with testing, etc...
-
chears m8 thank u
-
Interesting read.
I need to find a mate with multi room, buy him a dm500 and share his card from here, sorted ;-)
-
right guys got the card in the dm500 and im clearing some chanels s*Y 1 disc ect but no sports ect any ideas
-
if you are not using oscam rigrat you will need to put the boxkey onto your config
CCcam Support Forum
Configs, discussion, downloads and guides for CCcam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!