Oscam - complete newbie looking for dummies guide

Cccam should allow you.
You probably need 2.3.0 if you have a new image installed.
Are you hoping to set up oscam to use as a card reader or just a client?
Also, what image and card (if any) have you?

On the navbar above you have the OSCAM WIKI
Enjoy the read..

Is it for 28.2?

Here are standard oscam configs for uk 0963:
http://linuxsat-support.com/attachment.php?attachmentid=25589&d=1405858128
Extract out and sent the files to /etc/tuxbox/config/

Paste your line details into this handy tool and convert it to oscam server file:
http://linuxsat-support.com/attachment.php?attachmentid=10388&d=1344884910
Copy the output of this program and paste it into your oscam server file on your receiver (/etc/tuxbox/config/)
Start/ restart oscam on your receiver in softcam manager.

Does your friend who gave you the share allow double logins?
As watching one encrypted channel and recording another may show up as a double login on his server which he may not allow.

hi mate when you say details do you mean flins because when I do put my flins in off my cccam config it don't convert anything it will on convert clines but I only have fling in my server cccam file.
thanks

- - - Updated - - -

that should say only convert clines, When I paste my flins in to the prog it don't convert to anything.

Quote

hi mate when you say details do you mean flins

Your line details, eg: N: something.domain.something port# user pw 01 02 03 04 05 06 07 08 09 10 11 12 13 14
This was in relation to MuRf15's problem

To convert f lines, paste f line into top window of program and select "F: Lines".
On bottom window, select "oscam.user" and hit the "convert to oscam" button.
You can then inserted the converted details into your oscam user file on your server.

thanks but is that all I have to do, Because this is what got me confused when you said this , Paste your line details into this handy tool and convert it to oscam server file: Copy the output of this program and paste it into your oscam server file on your receiver, So the server file is just for clines.
thanks pal

Oscam server section is for converting proxy card details (c-lines / N-lines) and then goes into your server config file.
Oscam user section is for converting F-lines and then goes into oscam user config file.

ok thanks pal I will have another play tomozz, It'l be gone off by the time I get it sorted lol

Quote

It'l be gone off by the time I get it sorted

What exactly do you mean?

that was a joke mate. Ok iv set it up and it works on my box but all clients are off line?
thanks

Quote from muzz

that was a joke mate. Ok iv set it up and it works on my box but all clients are off line?
thanks

Muzz looks like you went from cccam to oscam as a server with a fast look at this thread if your cccam protocol is in is it the same port and is it forwarded and do you have a play button or pause button next to the user in the oscam user tab it needs to be pause or they are not enabled

I don't know now mate oscam just wouldnt work so Iv tried to set the box up with oscam and cccam with the files off here and even that don't work, I have oscam and cccam running great on my dreambox500 so I just change passwrds and my server port to the same in my et9000 as it is in the dreambox but no one can connect but works without bk in the my et9000 I just don't know what to do mate. sozz for being thick.

you will need to port forward even if its the same port as you had in a different device and it was working you need to forward that port to the correct device

- - - Updated - - -

check dns is updated and forward the port correctly and it should work

port is open and working on my dreambox mate, I just cant get oscam to work on my et9000 I need to know exactly what to change for it to work in my et9000, I want to know how to just run oscam on my server but let clients connect with c lines and I would like to know how to do the same with oscam/newcamd (CCcam just to see whats best. all channels clear on my et9000 with just oscam running and I can see all my clines but they cant connect to me so im missing something silly. I went back to set it up on my vu+duo but the power board decided to blow up.
Thanks lads

- - - Updated - - -

OK lads this is what I have downloaded from Linux support plugin. oscam-svn9843-cccam-2.1.3 openvix. my image im using on my et9000 is openvix Apollo.
here are the oscam and cccam configs.
Thanks
##########################
###LINUXSAT-SUPPORT.COM###
##########################

[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[newcamd]
port = 10001@0963:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1

[webif]
httpport = 8888 can i change this
httpuser = can i change this
httppwd = can i change this
httprefresh = 15
httpshowpicons = 1
httpallowed = 192.168.0.0-255.255.255.255

[dvbapi] is this needed
enabled = 1
user = linuxsatsupport
boxtype = dreambox
au = 1
[cccam]
port = 12000 Do i have to change this to my server port
version = 2.1.3
build = 3165
reshare = 1

[account] I think i have to leave this as it is?
user = linuxsat
pwd = support
description = CCcam
caid = 0963
au = s**uk
group = 1

[account] is this needed
user = linuxsat1
pwd = support1
description = mgcamd
caid = 0963
au = s**uk
group = 1

[account] is this needed
user = linuxsatsupport
description = dvbapi
caid = 0963
au = s**uk
group = 1

SERVER LISTEN PORT : Now i know i have to change this to my server port?
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : my user
WEBINFO PASSWORD : my passwd
TELNETINFO USERNAME :my user
TELNETINFO PASSWORD :my passwd
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME : can i change
OSD PASSWORD : can i change
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Thanks

N: something.domain.something port# user pw 01 02 03 04 05 06 07 08 09 10 11 12 13 14

test in this way

Quote

[reader]
label = your_label
protocol = cccam
device = something.domain.something,port#
user = user
password = pw
group = 1
ccckeepalive = 1

Display More

wheres the N line got to go mate
N: something.domain.something port# user pw 01 02 03 04 05 06 07 08 09 10 11 12 13 14

test in this way

[reader]
label = your_label
protocol = cccam
device = something.domain.something,port#
user = user
password = pw
group = 1
ccckeepalive = 1

for got to add my fline

F: et9000 et9000

SERVER LISTEN PORT : Now i know i have to change this to my server port?
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : my user
WEBINFO PASSWORD : my passwd
TELNETINFO USERNAME :my user
TELNETINFO PASSWORD :my passwd
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME : can i change
OSD PASSWORD : can i change
OSD PORT :80
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /var/log/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

thanks for your help lads but give up with this et9000 im going to wait and get another box.
thanks