PowerVu channels open on enigma2 with oscam-emu

There are 22 replies in this Thread which was already clicked 20,933 times. The last Post () by majid.209.mt.

    Tested with OpenSpa 4.0.002 BUT!!! It will not work with the modded pti.ko - you must use the original pti.ko (np) from the image.


    Not a direct method yet, but a workaround using a stream relay from oscam-emu. You have to setup an IPTV streaming service which connects to your local box's oscam-emu (default port 17999) which then connects to the local box's streaming port (default 8001). But it is ALL done on the receiver without any need for PC to decode...


    Basic steps.
    1. Compile oscam with oscam-emu patch with minimum settings DVBAPI, EMU, and CLOCKFIX enabled.
    (or use the attached version - NOTE: it was compiled with only basic emu for testing!)


    2. Basic oscam.conf file:


    3. Basic oscam.server file:


    4. Add SoftCam.key file to oscam config directory:


    Code
    P <srvid> <nb> <key>
example:
P 1234 01 11223344556677


    5. Enable the "Include ECM in http streams" setting. OpenWebif -> Settings -> Customize


    6. Yon can now test with VLC and connect to port 17999 instead of 8001. Some examples for AFN on 9.0E:


    7. To connect directly from box, use dreamboxedit to add IPTV streams to a bouquet with following settings:


    Code
    Stream Type :DVB/TS
        Name: (example HD SPORTS - local stream)
        URL: (url with localhost and port 17999 - example http://127.0.0.1:17999/1:0:1:B:1:9:5A0000:0:0:0)
        Service Type :1
        Service ID : 11  (must be DECIMAL - example from above url "B" -> 11)
        Transponder ID : 99 (doesn't matter)
        Network ID : 99 (doesn't matter)
        Namespace: 99 (doesn't matter)


    I only tested on AFN channels on 9.0E. CPU usage was only %10-%15!

    i test thor 0.8°W 's channels is workin good
    Code:
    #NAME PowerVu 0.8°W#SERVICE 1:0:1:A28:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA28%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Animal Planet HD
    #DESCRIPTION Animal Planet HD
    #SERVICE 1:0:1:A2E:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA2E%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Animal Planet HD1
    #DESCRIPTION Animal Planet HD1
    #SERVICE 1:0:1:A2B:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA2B%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Animal Planet HD Czech
    #DESCRIPTION Animal Planet HD Czech
    #SERVICE 1:0:1:A2D:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA2D%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Animal Planet HD Hungarian
    #DESCRIPTION Animal Planet HD Hungarian
    #SERVICE 1:0:1:A29:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA29%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Animal Planet HD Polish
    #DESCRIPTION Animal Planet HD Polish
    #SERVICE 1:0:1:514:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a514%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Historia Poland
    #DESCRIPTION Historia Poland
    #SERVICE 1:0:1:C1C:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aC1C%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:TLC Poland HD
    #DESCRIPTION TLC Poland HD
    #SERVICE 1:0:1:578:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a578%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Discovery Iberia
    #DESCRIPTION Discovery Iberia
    #SERVICE 1:0:1:C80:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aC80%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Science Europe HD
    #DESCRIPTION Science Europe HD
    #SERVICE 1:0:1:A8D:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aA8D%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:ID Xtra Europe HD
    #DESCRIPTION ID Xtra Europe HD
    #SERVICE 1:0:1:BB8:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aBB8%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:DTX
    #DESCRIPTION DTX
    #SERVICE 1:0:1:9C4:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3a9C4%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Discovery HD Showcase Europe
    #DESCRIPTION Discovery HD Showcase Europe
    #SERVICE 1:0:1:AF0:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3aAF0%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Discovery Poland HD
    #DESCRIPTION Discovery Poland HD
    #SERVICE 1:0:1:bb8:B:16:0:0:0:0:http%3a//127.0.0.1%3a17999/1%3a0%3a1%3abb8%3a2%3a5E%3aE08B00F%3a0%3a0%3a0%3a:Turbo Xtra HD
    #DESCRIPTION Turbo Xtra HD


    thanks for sharing !!!
    I try and emu are working.But my Oscam only open emu channel now with above file, others cline channel in my oscam are not working,only emu reader are connected, others are 'unknow' status.May i know how should i set oscam.server and oscam.conf file in order to make my cline working again with Oscam ? thanks !!

    Quote from joeuser


    1. Compile oscam with oscam-emu patch with minimum settings DVBAPI, EMU, and CLOCKFIX enabled.
    (or use the attached version - NOTE: it was compiled with only basic emu for testing!)


    I did not include any other readers or protocols when I compiled oscam. if you let me know what reader/protocols you need, I can compile another version that you can try.


    HOWEVER, depending on which pti.ko module you are using, other channels may not clear normally - only through oscam (17999) connection.



    Which image did you test with? OpenSPA?


    can i use this for neutrino image?

    Neutrino uses a different port and format for streaming.


    The url for neutrino looks something like:

    Code
    http://boxip:31339/id=aa0004210001ef10


    To use with oscam-emu/osemu stream relay, you need to:


    In oscam.conf, change the port from 8001 to 31339.


    And you need to append the service id (srvid/sid) to the end of the url. So for a sid of "ef10" it would look something like:

    Code
    http://127.0.0.1:17999/id=aa0004210001ef10:0:0:0:ef10


    (appended to the url is ":0:0:0:ef10")


    And instead of userbouquets, the xml file for neutrnio would be something like:


    XML
    <?xml version="1.0"?>
<webtvs>
<webtv title="XYZ" url="http://127.0.0.1:17999/id=aa0004210001ef10:0:0:0:ef10" description="Stream" />
</webtvs>


    thanks for sharing mate,
    but i still confuse with neutrino image, cause powervu chanel still not work yet.
    when i change the oscam it doesn't appear in the box.
    how to fix it?



    Sent from my Mi 4i using Tapatalk

    I can't help if all you can tell me is "it doesn't work." You need to post the steps you have taken, maybe some logs, etc. The file in the first post works, but it is quite old now. Newest version can be found in the oscam-emu files section.



    ive read this many times and is there something missing
    now im no expert but where is the oscam user


    [account]
    user = user1
    au = 1
    group = 1,2,3,4



    above config works with when account is included
    in conjuction with workung keys

    parabéns cr7 & moliveira88

    Μπρέντφορντ Φ.Σ

    RIP Vangelis Papathanassiou

    Edited 2 times, last by Antepenultim8 ().

    I use joeuser's oscam-emu 1205 (thanks again joeuser) on vu+ zero/blackhole oe3, the channels at 0.8W with greek subs its all ok except AnimalPlanetHD with greek subs, i have picture but no sound :( .
    Curiously all the other AnimalPlanetHD its fine. If someone knows the issue please help me to resolve it.
    Thank you in advance!

Spark STI 7162 Support

Support for Amiko Alien 2, Delta, Dynavision 7162, Galaxy Innovations Avatar 2, Galaxy Innovations Avatar 3, Golden Media Spark Triplex, Golden Media Spark One, Icecrypt S3700 CHD, SAB Unix Triple HD, Samsat Linux 2, Satcom 7162, Sogno Spark Triple, Startrack SRT 2020 HD Plus, Superbox Z500, Truman TOP-BOX, Truman TopBox 2 Tuner, Visionnet Falcon, Spark STI 7162 Receivers.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login