oscam error on nagra3 card 1802

There are 13 replies in this Thread which was already clicked 5,785 times. The last Post () by smurffx.

    HI Guys tried setting up oscam on MCTV barbados am using window oscam svn Build #6020 and smargo reader I have set my config as follows....


    OSCAM.CFG
    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    # protocols


    #[newcamd]
    #key = 0102030405060708091011121314
    #port = 15366@0963:000000;10001@0963:000000


    [cccam]
    # for your clients with CCCam (i.e. they have a C: line)
    port = 15370
    # or whatever you use.
    reshare = 1
    ignorereshare = 0
    version = 2.2.1
    updateinterval


    OSCAM SERVER


    [reader]
    label = MCTV
    enable = 1
    protocol = mouse
    device = /dev/ttyS0
    caid = 1802:000000
    detect = cd
    cardmhz = 357
    group = 1
    emmcache = 1,3,2
    ecmcache = 1
    blockemm-unknown = 1
    blockemm-g = 1
    lb_weight = 101


    OSCAM USER


    [account]
    user = dreambox1
    pwd = lounge
    group = 1
    uniq = 1
    au = MCTV
    caid = 1802


    the errors are in the log below any help appreciated. Cheers guys


    2011/11/13 17:12:23 0 s version=1.20-unstable_svn, build #6020, system=i386-pc-cygwin, nice=-1
    2011/11/13 17:12:23 0 s client max. idle=120 sec, debug level=0
    2011/11/13 17:12:23 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
    2011/11/13 17:12:23 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2011/11/13 17:12:23 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
    2011/11/13 17:12:23 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
    2011/11/13 17:12:23 0 s signal handling initialized (type=sysv)
    2011/11/13 17:12:23 0 s 775 service-id's loaded in 3ms
    2011/11/13 17:12:23 0 s oscam.tiers loading failed
    2011/11/13 17:12:23 0 s oscam.provid loading failed, wrong format?
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s monitor: disabled
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s camd35: disabled
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s cs378x: disabled
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s newcamd: disabled
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s cccam: initialized (fd=3, port=15370, crypted)
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s pandora: disabled
    2011/11/13 17:12:23 0 s Starting listener 0
    2011/11/13 17:12:23 0 s radegast: disabled
    2011/11/13 17:12:23 ECDEA0 h HTTP Server listening on port 8888
    2011/11/13 17:12:23 0 s http thread started
    2011/11/13 17:12:23 0 s reader check thread started
    2011/11/13 17:12:23 0 s check thread started
    2011/11/13 17:12:23 0 s creating thread for device /dev/ttyS0
    2011/11/13 17:12:23 0 s loadbalancer: can't read from file /cygdrive/c/Windows/TEMP/_oscam/stat
    2011/11/13 17:12:23 0 s waiting for local card init
    2011/11/13 17:12:26 ECF830 r reader mctv initialized (device=/dev/ttyS0, detect=cd, mhz=357, cardmhz=357)
    2011/11/13 17:12:27 0 mctv card detected
    2011/11/13 17:12:35 ECF830 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
    2011/11/13 17:12:37 ECF830 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2011/11/13 17:12:43 ECF830 r detect native nagra card
    2011/11/13 17:12:53 ECF830 r card system not supported
    2011/11/13 17:12:53 ECF830 r Normal mode failed, reverting to Deprecated Mode
    2011/11/13 17:13:01 ECF830 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
    2011/11/13 17:13:03 ECF830 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2011/11/13 17:13:05 ECF830 r detect native nagra card
    2011/11/13 17:13:15 ECF830 r card system not supported
    2011/11/13 17:13:15 ECF830 r card initializing error

    Obviously I must have asked a stupid question in both sharing and oscam support as they are both to do with same issue. Still trying to get this fooker working so am trying to set oscam up on a 500 using master G's tut here. http://linuxsat-support.com/os…m-pli-enigma1-images.html. Dont know if this will make a difference with the N3 card in the dm box but am trying everything here. Have done all the tut and have oscam 1.00 set as default softcam. How do I access oscam web i/f? within dreambox. I tried using ipaddy:8888 as this is the port I have setup in oscam conf.


    Any response guys even if it is "cant be done" or u need boxkey and rsa for that card. cheers guys

    OK just found this image on this post http://linuxsat-support.com/dm…2-13-uk-ready-backup.html I have reflashed using this and I can now access web i/f just need to modify config files. I will give this a go and see wot happens aint got the card today so cant try till tonite


    Cant do manual scan to pick up channels?? this worked ok on other images mmm. maybe go back to pli and try that again. Good fun this sat stuff innit lol. I'll get there but should be on the beach by now how sad is that

    just looking at your configs ,I presume you left them as an example of how you have it¿¿??
    #[newcamd]
    #key = 0102030405060708091011121314
    #port = 15366@0963:000000;10001@0963:000000

    then you have : au = MCTV
    caid = 1802
    ¿ is this how you really have it or just an example??


    This is how I had it Cazuela they were the "working" (or not as the case is) configs I used Newcamd was remarked out so was using cccam to try and connect to my box. That connected ok but card was not opening channels

    Quote from steve67474

    OK just found this image on this post http://linuxsat-support.com/dm…2-13-uk-ready-backup.html I have reflashed using this and I can now access web i/f just need to modify config files. I will give this a go and see wot happens aint got the card today so cant try till tonite


    Cant do manual scan to pick up channels?? this worked ok on other images mmm. maybe go back to pli and try that again. Good fun this sat stuff innit lol. I'll get there but should be on the beach by now how sad is that


    OK just got the card and I get this message when trying to access card in dm500


    1970/01/01 0:30:07 31825B50 r |1D01|0884 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|09F5 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|0754 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|087F |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|0752 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|09F6 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|087E |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|0993 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|09F3 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r |1D01|09F2 |2011/09/28 |2012/01/13 |
    1970/01/01 0:30:07 31825B50 r -----------------------------------------
    1970/01/01 0:30:07 31825B50 r Negotiate sessionkey was not successfull! Please check rsa key and boxkey
    1970/01/01 0:30:07 31825B50 r card system not supported
    1970/01/01 0:30:07 31825B50 r Normal mode failed, reverting to Deprecated Mode
    1970/01/01 0:30:08 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
    1970/01/01 0:30:09 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
    1970/01/01 0:30:10 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
    1970/01/01 0:30:12 31825B50 r detect native nagra card
    1970/01/01 0:30:15 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=4 errno=11
    1970/01/01 0:30:16 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=12 errno=11
    1970/01/01 0:30:16 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=4 errno=11
    1970/01/01 0:30:18 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=12 errno=11
    1970/01/01 0:30:18 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=4 errno=11
    1970/01/01 0:30:19 31825B50 r card system not supported
    1970/01/01 0:30:19 31825B50 r card initializing error
    1970/01/01 0:30:19 300162B0 s init for all local cards done
    1970/01/01 0:30:19 300162B0 s anti cascading disabled ese are my config files in dm500


    Config..


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    # protocols


    [newcamd]
    key = 0102030405060708091011121314
    port = 15370@1802:000000


    #### linuxsat-support.com ###


    User
    [account]
    user = test1
    description = for local mgcamd or DVBAPI
    pwd = test2
    disabled = 0
    uniq = 1
    group = 1
    au = cardslot
    caid = 1802:000000
    #### linuxsat-support.com ###


    Server
    [reader]
    label = cardslot
    enable = 1
    protocol = internal
    device = /dev/sci0
    caid = 1802:000000
    detect = cd
    ident = 1802:000000
    group = 1
    emmcache = 1,3,2
    ecmcache = 1
    blockemm-g = 1
    blockemm-unknown = 1
    lb_weight = 101



    #### linuxsat-support.com ###


    Looks like I need Boxkey and RSA keys

    • Official Post

    Nagra cards need RSA keys and Boxkey converted so they work in oscam.


    Have you checked the oscam wiki cards list to see if this 1802 card is compatable in oscam ?


    If you find the caid and identity on there post them and i will try to write configs for you, but you will have to find RSA and boxkey yourself buddy.

    Cheers Master G the boxes over here are jtaggable. I just need to find out the points and software to do it. not many ppl over here share info so its tough going. Have had a look inside one of the boxes and think I can see the points but who knows. the box is a Visionetics vistar 3010q


    I think its this one from the wiki...


    Via Embratel (1802:0000)


    ATR: 33 FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
    CAID: 1802
    ECM: OK
    EMM: not ok


    same atr


    As an addition Master G they use RQCS card server for sharing here. Never heard of it before but have googled it. so will have a read up.

    Hi Master G,
    Have boxkey and RSA but still same error message. Boxkey is 16 alphanumeric characters is that right there are no gaps betreen them when I put it in oscam server also rsa key is 12 bytes long and 8 lines in total does this sound right? also when I enter the rsa in oscam and save it and then go back in there it isnt there??? any suggestions really appreciated as we are almost there I am sure.

    here is the latest error log with rsa and boxkey. and below is the current config obviously boxkey and rsa key not vailid in this example.....




    2011/11/17 15:07:27 31825B50 r |1D01|09F3 |2011/09/28 |2012/01/13 |
    2011/11/17 15:07:27 31825B50 r |1D01|09F2 |2011/09/28 |2012/01/13 |
    2011/11/17 15:07:27 31825B50 r -----------------------------------------
    2011/11/17 15:07:27 31825B50 r Negotiate sessionkey was not successfull! Please check rsa key and boxkey
    2011/11/17 15:07:27 31825B50 r card system not supported
    2011/11/17 15:07:27 31825B50 r Normal mode failed, reverting to Deprecated Mode
    2011/11/17 15:07:27 31825B50 r Extra delay for PPC box between reset and IO_Serial_Read for the ATR
    2011/11/17 15:07:29 31825B50 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 32 16
    2011/11/17 15:07:30 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
    2011/11/17 15:07:32 31825B50 r detect native nagra card
    2011/11/17 15:07:37 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=4 errno=11
    2011/11/17 15:07:38 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=12 errno=11
    2011/11/17 15:07:38 31825B50 r ERROR in IO_Serial_Write u=-1 to_send=4 errno=11
    2011/11/17 15:07:39 31825B50 r card system not supported
    2011/11/17 15:07:39 31825B50 r card initializing error


    Oscam conf


    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    # protocols


    [newcamd]
    key = 0102030405060708091011121314
    port = 15370@1802:000000


    #### linuxsat-support.com ###


    Oscam Server


    # oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #4863
    # Read more: oscam.server.txt in trunk/Distribution/doc/txt


    [reader]
    label = cardslot
    enable = 1
    protocol = internal
    device = /dev/sci0
    caid = 1802
    fix9993 = 0
    boxkey = xxxxxxxx
    rsa key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    detect = cd
    mhz = 500
    cardmhz = 357
    ident = 1802:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    lb_weight = 101


    Oscam User


    [account]
    user = test1
    description = for local mgcamd or DVBAPI
    pwd = test2
    disabled = 0
    uniq = 1
    group = 1
    au = cardslot
    caid = 1802:000000
    #### linuxsat-support.com ###

    Hi, I wouldnt make your boxkey public mate.


    not sure about the rsa key either, how did you get it? jtag?


    long time since i played with nagra stuff. {I thought that nagra 3 cards were still un-opened}

    If its not broke --- fix it anyway.

    Hi


    For the caid 1802 try :


    oscam config


    [global]
    Nice = -1
    LogFile = stdout
    MaxLogSize = 102400
    Sleep = 0
    FallbackTimeout = 2
    ClientTimeout = 5
    ClientMaxIdle = 120
    CacheDelay = 150
    WaitForCards = 1
    PreferLocalCards = 1


    [newcamd]
    key = 0102030405060708091011121314
    port = Your_port@1802:004801,004901,000000 ##Ist OK


    Oscam User


    [account]
    user = BBBB
    pwd = CCCC
    group = 1
    au = TVCABO



    Oscam Server



    [reader]
    label = TVCABO
    protocol = internal
    detect = cd
    device = /dev/sci0
    group = 1
    mhz = 357
    cardmhz = 357
    emmcache = 1,3,2
    caid = 1802
    ident = 1802:004801,004901,000000
    n3_boxkey = xxxxxxxxxxx <- Insert your boxkey
    n3_rsakey = xxxxxxxxxxx <- Insert your rsakey



    Done ::



    Ccam config




    N: 127.0.0.1 YOUR_PORTUSER PASS 01 02 03 04 05 06 07 08 09 10 11 12 13 14 :mrg:



    Macke Reboot sistem and active CAM and save
    Oléééééé the best


    Thanks for the info _Zorro_.


    I don't have a card yet, but I am interesting in testing this one. Could you say me whether rsa & box keys can be calculated or I need open original receiver and work with JTAG??


    Greetings!!!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login