Peers cannot connect

Hello again
I'm having problems getting my peers connected to my server, i've tried everything i can think of and nothing works i can connect with my own client but no else can.

i've tried changing images BH 2.1.7, Newnigma2, ATV 5.0, now i'm on openpli 4.0 this is on a DB800 SE HD clone as server.

i've tried generaly with CCcam 2.3.0 as i cant find 2.1.3 for most of the images, atm i'm trying CCcam 2.1.4 on the openpli.

i've checked the network that's ok
i've checked the port that's forwarded ok
i've checcked the dns that's correct ok
i've checked and checked the entries they seem ok
I've checked and rechecked all usernames/passwords

i just cannot begin to think what else to try i've rebooted so many times i'm giddy, i'll post my configs i hope someone can help.

F: Mysolo meown 1 0 0 { 0:0:1 } { } { }
F: linuxsat1 support1 2 0 0 { 0:0:2 } { } { } thisun.dns.org
F: linuxsat2 support2 2 0 0 { 0:0:2 } { } { } thisun2.dns.org
F: linuxsat3 support3 2 0 0 { 0:0:2 } { } { } thisun3.dns.org
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : ****
WEBINFO PASSWORD : ******
TELNETINFO LISTEN PORT : 16000
TELNETINFO USERNAME : *****
TELNETINFO PASSWORD : ******
ZAP OSD TIME : 1
OSD USERNAME : *****
OSD PASSWORD : *****
OSD PORT : 80
#BOXKEY: /dev/sci0
#SERIAL READER: /dev/ttsUSB0 smartreader+
SMART CARD CLOCK FREQUENCY: /dev/sci0 4000000
SMART CARD CLOCK FREQUENCY: /dev/sci1 3570000
SHOW TIMING : yes
MINI OSD : no
DEBUG : yes
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : no
#EMM THREADS : 1
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
#MINIMUM DOWNHOPS: 1
MINIMUM CLIENT VERSION : 1.7.0
LOG WARNINGS : /tmp/warnings.txt
##############################################################################

N:192.168.0.01 user pass 10000 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

#############################################################################

##############################################################################

OK FOUND IT
the bloody router firewall was blocking everyone.

all is well now.

regards: canthackit

Sorry to have to resurrect this thread.
I now have another problem, since yesterday my client box would not and still does not connect to the server.
But now added to the problem is now my cyfra card will not clear on the server..... redlight sub is fine though in the bottom slot.
I've been messing around trying different images and i've settled atm for Newnigma2 with CCcam 2.3.0 with the above settings on the server.
Any ideas as to why cyfra would stop working, oh and i tried swapping card slots redlight fusion works in both so i dont think it's that.
Any help would be greatly appriciated.

i can see now both cards are being detected but only redlight clearing.

regards: canthackit

thanks mate
i think that could be one of the signifcant things swapping about to much, thats me all over can't leave well alone, if it aint broke try and make it better, then sod everything up.

just checked the log loads of ip addres's all with login failed

regards: canthackit

cannot see me on port 80

- - - Updated - - -

i've now managed to get oscam running, on openpli.

it's showing on oscam much as you would expect "cyfra no entitlements"

i've took the chance and just emailed satsklep asking them if they will reactivate my card.

now i wait til hopefully tomorrow for the their reply.

or is there a way i can force the updates somehow?

regards: canthackit

Do i need to have the lnb cable connected? as atm it's connected to my client box.
or is it just ok to have an ethernet connection only?
further more i've had to go back to CCcam 2.3.0 as oscam would'nt connect ot the redlight fusion either.

regards: canthackit