its not opening,i have a working key
- - - Updated - - -
i have started it but its not working don't know if i have not done it right
There are 42 replies in this Thread which was already clicked 7,934 times. The last Post () by bhageshmeena.
its not opening,i have a working key
- - - Updated - - -
i have started it but its not working don't know if i have not done it right
You should connect to the oscam-emu webif from a browser (http://(your box ip):8888) and look at the logs to see if it gives you any hints. You can post here, but be careful to remove any keys/private details...
I just flashed my receiver to start all over again,with the files you gave me will need your guide again to scale true this time.i need to set up my cline or will it be necessary for me to get a separate cam for my cline or the oscam-emu you will do
- - - Updated - - -
hi mbi,can you assist me to set up powervu on my vu duo2 using openvix image.am new to enigma and the stress is too much
I just flashed my receiver to start all over again,with the files you gave me will need your guide again to scale true this time.i need to set up my cline or will it be necessary for me to get a separate cam for my cline or the oscam-emu you will do
- - - Updated - - -
hi mbi,can you assist me to set up powervu on my vu duo2 using openvix image.am new to enigma and the stress is too much
Oscam-emu still supports the regular functions of oscam... If you need help with a cline, look in the oscam section.
For powervu, look here for instructions. How to Watch PowerVu Channels on Enigma2 with Oscam Emu If you have specific questions, you should post in that thread.
thanks instead of using the oscam file link in the pdf guide,i can ftp latest you sent me yesterday and send to usr/bin?
Yes, latest is best. As to where, I am not sure for your box/image - best to follow master G's advice.
am using vu+ duo2 with openvix image 3.2 version
Hi - I am running openvix 3.2 build 009 on vudu02. I have installed oscam emu 11034 from the attachment in the first post of this thread - specifically from build_dir_mipsoe20, oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal.tar , it is oscam [1,369KB from 04/10/2015]. oscam is available in the softcam manager menu and appears to start but doesn't run. I have checked this in telnet/ps, so there isn't a log and I can't connect to oscam-emu webif on port 8888. I have the oscam conf files set up as per this thread.
I am wondering if I have done something wrong or perhaps this version of oscam is incorrect for openvix 3.2. Any advice would be much appreciated. Thanks
Hi - I am running openvix 3.2 build 009 on vudu02. I have installed oscam emu 11034 from the attachment in the first post of this thread - specifically from build_dir_mipsoe20, oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal.tar , it is oscam [1,369KB from 04/10/2015]. oscam is available in the softcam manager menu and appears to start but doesn't run. I have checked this in telnet/ps, so there isn't a log and I can't connect to oscam-emu webif on port 8888. I have the oscam conf files set up as per this thread.
I am wondering if I have done something wrong or perhaps this version of oscam is incorrect for openvix 3.2. Any advice would be much appreciated. Thanks
Did you change permissions on the oscam file to 755 then restart enigma2 ?
Did you change permissions on the oscam file to 755 then restart enigma2 ?
I had changed the permissions to 755 on the oscam file but I hadn't restarted enigma2. I have now and have the same result as described previously.
I have installed oscam emu 11034 from the attachment in the first post of this thread - specifically from build_dir_mipsoe20, oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal.tar
Just tested it on openvix and get the following error.
Try the minimal-libcrypto_static version, it`s working..
Thanks so much for that, I had tried to run it from telnet but got nothing back, but that was before I had restarted enigma2. Done as you say, and oscam now running. Thanks very much master G.
- - - Updated - - -
As a follow up to the above, I found that both
oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal-libcrypto_static [1,594KB] &
oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal-libcrypto_static-compressed [615KB] worked.
- - - Updated - - -
Would it be ok if I posted the start of the oscam.log to get some help re a specific highlighted error. I believe I have obliterated fields as required.
Display MoreThanks so much for that, I had tried to run it from telnet but got nothing back, but that was before I had restarted enigma2. Done as you say, and oscam now running. Thanks very much master G.
- - - Updated - - -
As a follow up to the above, I found that both
oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal-libcrypto_static [1,594KB] &
oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal-libcrypto_static-compressed [615KB] worked.
- - - Updated - - -
Would it be ok if I posted the start of the oscam.log to get some help re a specific highlighted error. I believe I have obliterated fields as required.
Go ahead buddy.
Looks like you have multiple keys for srvid 4 in your softcam.key file. If you have more than one, the second should be 10004 and the third 20004 etc.
PowerVU config
==============
Keys in SoftCam.Key:
P <srvid> <nb> <key>
example:
P 1234 01 11223344556677
For channels with same srvid:
Channel #1: P 1234 01 11223344556677
Channel #2: P 11234 01 11223344556677
Channel #3: P 21234 01 11223344556677
AU keys:
P <srvid> <UA> <key>
example:
P 1234 11223344 11223344556677
Display More
Hi again - I believe I now have a SoftCam.Key file configured for PowerVU, the contents at the moment are for just one set of channels. Everything appears ok [i.e. no obvious errors in oscam.log] but none of the target channels are clearing. I believe I have the rights keys. I attach the oscam.log with certain fields obliterated. Would be grateful for any advice. Thanks again.
Was wondering if I posed my oscam.log in this format, if it might help identify the cause of the problem I am having. Thankyou.
2015/10/12 15:40:44 00000000 s >> OSCam << cardserver log switched, version 1.20-SU-r236-EMU-r312-721, build r11034 (mipsel-unknown-linux-gnu)
2015/10/12 15:40:44 00000000 s (main) System name = Linux
2015/10/12 15:40:44 00000000 s (main) Host name = vuduo2
2015/10/12 15:40:44 00000000 s (main) Release = 3.13.5
2015/10/12 15:40:44 00000000 s (main) Version = #1 SMP Sat Oct 3 14:29:16 BST 2015
2015/10/12 15:40:44 00000000 s (main) Machine = mips
2015/10/12 15:40:44 00000000 s (main) Stb model = dm8000
2015/10/12 15:40:44 00000000 s (main) Stb vumodel = vuduo2
2015/10/12 15:40:44 00000000 s (main) Stb boxtype = vuduo2
2015/10/12 15:40:44 00000000 s [Emu] oscam-emu version 721
2015/10/12 15:40:44 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/12 15:40:44 00000000 s (main) signal handling initialized
2015/10/12 15:40:44 00000000 s (reader) SoftCam.Key [constcw] creating thread for device /etc/tuxbox/config/SoftCam.Key
2015/10/12 15:40:44 00000000 s (reader) constant.cw [constcw] creating thread for device /etc/tuxbox/config/constant.cw
2015/10/12 15:40:44 00000000 s (reader) oscam.keys [constcw] creating thread for device /etc/tuxbox/config/oscam.keys
2015/10/12 15:40:44 00000000 s (reader) oscam.constant.cw [constcw] creating thread for device /etc/tuxbox/config/oscam.constant.cw
2015/10/12 15:40:44 00000000 s (reader) emulator [emu] creating thread for device emulator
2015/10/12 15:40:44 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/12 15:40:44 00000000 s (main) waiting for local card init
2015/10/12 15:40:44 02E168B4 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/10/12 15:40:44 02E168B4 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/10/12 15:40:44 7B1627CF p (constcw) Local reader: oscam.keys (file: /etc/tuxbox/config/oscam.keys)
2015/10/12 15:40:44 7B1627CF p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam.keys (errno=2 No such file or directory)
2015/10/12 15:40:44 7B1627CF p (reader) oscam.keys [constcw] proxy initialized, server /etc/tuxbox/config/oscam.keys:0
2015/10/12 15:40:44 2AAE2064 p (constcw) Local reader: SoftCam.Key (file: /etc/tuxbox/config/SoftCam.Key)
2015/10/12 15:40:44 2AAE2064 p (reader) SoftCam.Key [constcw] proxy initialized, server /etc/tuxbox/config/SoftCam.Key:0
2015/10/12 15:40:44 1F24EE25 h (webif) webif: decompressed 182516 bytes back into 416936 bytes
2015/10/12 15:40:44 1F24EE25 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/10/12 15:40:44 00000000 [Emu] info: FFDecsa parallel mode = 64
2015/10/12 15:40:44 304F7609 p (constcw) Local reader: oscam.constant.cw (file: /etc/tuxbox/config/oscam.constant.cw)
2015/10/12 15:40:44 304F7609 p (constcw) ERROR: Can't open /etc/tuxbox/config/oscam.constant.cw (errno=2 No such file or directory)
2015/10/12 15:40:44 304F7609 p (reader) oscam.constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/oscam.constant.cw:0
2015/10/12 15:40:44 4E1AB4A7 p (constcw) Local reader: constant.cw (file: /etc/tuxbox/config/constant.cw)
2015/10/12 15:40:44 4E1AB4A7 p (constcw) ERROR: Can't open /etc/tuxbox/config/constant.cw (errno=2 No such file or directory)
2015/10/12 15:40:44 4E1AB4A7 p (reader) constant.cw [constcw] proxy initialized, server /etc/tuxbox/config/constant.cw:0
2015/10/12 15:40:44 02E168B4 r (reader) emulator [emu] card detected
2015/10/12 15:40:45 02E168B4 r (reader) emulator [emu] found card system emu
2015/10/12 15:40:45 02E168B4 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/10/12 15:40:45 02E168B4 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/10/12 15:40:45 00000000 s (main) init for all local cards done
2015/10/12 15:40:45 00000000 s (emmcache) loading emmcache disabled
2015/10/12 15:40:45 00000000 s (emmcache) loading emmstat disabled
2015/10/12 15:40:45 00000000 s (anticasc) anti cascading disabled
2015/10/12 15:40:45 60C539B6 c (client) plain dvbapi-client granted (linuxsatsupport, au=off)
2015/10/12 15:40:45 60C539B6 c (dvbapi) loading channelcache disabled
2015/10/12 15:40:45 60C539B6 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/10/12 15:41:17 1F24EE25 h (webif) unauthorized access from 127.0.0.1
2015/10/12 15:41:20 60C539B6 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 177A PROVID: 000000
2015/10/12 15:41:20 60C539B6 c (dvbapi) Demuxer 0 found 1 ECMpids and 9 STREAMpids in PMT
2015/10/12 15:41:20 60C539B6 c (dvbapi) Demuxer 0 serving srvid 000A (0E00@000000:000A unknown) on adapter 0000 camask 0001 index 0000 pmtpid 1392
2015/10/12 15:41:20 60C539B6 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177A ANY CHID PMTPID 1392 VPID 0424
2015/10/12 15:41:20 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:20 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:20 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:21 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:22 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (21 ms) by emulator (L/1/5/5)
2015/10/12 15:41:23 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:24 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:24 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:25 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:26 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:27 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:28 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:29 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:29 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:30 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:31 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (3 ms) by emulator (L/1/5/5)
2015/10/12 15:41:32 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:32 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:33 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:34 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:35 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:36 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:37 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:37 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:38 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:39 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:40 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:41 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:41 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:42 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:43 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:44 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:45 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:45 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:46 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:47 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:48 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:49 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (7 ms) by emulator (L/1/5/5)
2015/10/12 15:41:50 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:50 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (5 ms) by emulator (L/1/5/5)
2015/10/12 15:41:51 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:52 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (9 ms) by emulator (L/1/5/5)
2015/10/12 15:41:53 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:54 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:54 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:55 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000A/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:56 60C539B6 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0E00 ECM_PID: 177B PROVID: 000000
2015/10/12 15:41:56 60C539B6 c (dvbapi) Demuxer 0 found 1 ECMpids and 5 STREAMpids in PMT
2015/10/12 15:41:56 60C539B6 c (dvbapi) Demuxer 0 serving srvid 000B (0E00@000000:000B unknown) on adapter 0000 camask 0001 index 0000 pmtpid 1393
2015/10/12 15:41:56 60C539B6 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 177B ANY CHID PMTPID 1393 VPID 0582
2015/10/12 15:41:56 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (10 ms) by emulator (L/1/5/5)
2015/10/12 15:41:56 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (4 ms) by emulator (L/1/5/5)
2015/10/12 15:41:57 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:41:58 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:41:58 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (7 ms) by emulator (L/1/5/5)
2015/10/12 15:41:59 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:00 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:01 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:02 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:03 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:03 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:04 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (3 ms) by emulator (L/1/5/5)
2015/10/12 15:42:05 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (3 ms) by emulator (L/1/5/5)
2015/10/12 15:42:06 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:06 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:07 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:08 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:09 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:10 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:11 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:11 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:12 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:13 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:14 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:15 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:15 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:16 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:17 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:18 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:19 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:19 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:20 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (9 ms) by emulator (L/1/5/5)
2015/10/12 15:42:21 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:22 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:23 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:24 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:24 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:25 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:26 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:27 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:28 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:28 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:29 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:30 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (1 ms) by emulator (L/1/5/5)
2015/10/12 15:42:31 60C539B6 c (ecm) linuxsatsupport (0E00@000000/0000/000B/40:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (2 ms) by emulator (L/1/5/5)
2015/10/12 15:42:31 1F24EE25 h (main) exit oscam requested
Display More
Powervu channels do not just "open" the same as other channels with oscam. You need to look at the instructions closely and use the "stream relay" to view the powervu channels. Probably best to first test with an external viewer (like VLC) on a PC to verify it is working before you try to create the IPTV favorites for enigma2...
morning all,i just installed openpli on vu duo2 box.for openpli image where should i send the oscam emu patch to
Powervu channels do not just "open" the same as other channels with oscam. You need to look at the instructions closely and use the "stream relay" to view the powervu channels. Probably best to first test with an external viewer (like VLC) on a PC to verify it is working before you try to create the IPTV favorites for enigma2...
Thanks for the reply. Below is a summary of actions I had taken before I posted the oscam.log above. I 'think' the actions are as detailed in the instructions. I haven't managed to get any powerVU to clear yet but I hope if anyone who has the time to read what I have done, then maybe they could show me where I am going wrong. I include the config files.
Thanks again.
1. Running openvix 3.2 build 009 on vudu02
2. Install oscam oscam-1.20-SU-236-EMU-312-721-SB-11034-mipsoe20-komplett-minimal-libcrypto_static [1,594KB] from post 1 of this thread.
3. SoftCam.Key - valid keys [I believe] in /etc/tuxbox/config/
4. OpenWebif
Download and Save the .m3u file for the current powerVU channel. Edit the hostname to 127.0.0.1 and the port to the stream relay port 17999
5. Try in VLC i.e open the edited .m3u file -
Your input can't be opened:
VLC is unable to open the MRL 'http://127:0:0:1:17999/1:0:11:1:9:5A0000:0:0:0:'. Check the log for details.
6. DreamBoxEdit
In Bouquet details - IPTV and other streaming services, Add.
In the resulting IPTV streaming details:-
Stream Type = DVB/TS
Service Data/Name = Name of channel
Service Data/URL = The edited stream link from point 5 [above] as URL
DVB/TS Data/Service Id = As for the original channel and in decimal [not hex]
DVB/TS Data/Service Type = 1
DVB/TS Transponder Id = 11
DVB/TS Network Id = 22
DVV/TS Namespace =33
Save
7. OpenVix doesnt seem to support "Include ECM in http streams", I couldn't find it in OpenWebif/Settings/Customise.
Tried adjusting the "ECM fix delay" setting in oscam webif (Config -> Stream Relay).
8. Try IPTV favourites on vudu02 - select the channel, Stream 127.0.0.1%3a17999 [start of transponder reference] is displayed in bottom left hand corner of favorites screen, OK, black screen.
9. Try to watch it from channel list, channel infobar shows Protocol: emu Hops:0 ecm: 0.001
10.Oscam config files as below
oscam.config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-SU-r236-EMU-r312-721 SVN r11034
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 500
preferlocalcards = 1
[cache]
[streamrelay]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = linuxsatsupport
boxtype = dreambox
[webif]
httpport = 8888
httprefresh = 15
httpallowed = 192.168.0.0-255.255.255.255
Display More
oscam.server
[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
group = 2
[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
group = 3
[reader]
label = oscam.keys
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
group = 4
[reader]
label = oscam.constant.cw
protocol = constcw
device = /etc/tuxbox/config/oscam.constant.cw
group = 5
Display More
Don’t have an account yet? Register yourself now and be a part of our community!