Wtd Dreambox 500s image with oscam for c/s please

Looking for an updated image to be able to share card to friends and family using my dm500s. I will pay someone a few pounds or donate it to a charity if they don't want money. I'm not looking to make money out of this venture , Any help will be greatly appreciated

Quote from master G

You don`t need to pay anyone buddy. Here is a ready to go image -> command 15d 500s 3 cams .. I`m not sure if this image has configs, so i`ve attached the oscam configs for you..

FTP config files to /var/tuxbox/config

If this is a white uk card and has been inserted in the official hd decoder the card will be paired and won`t work in any other receiver.. There is a few things you need to do to get it working again..

Thanks very much m8, Its really appreciated Can you please point me in the right direction as how to unlock my card coz I think its locked

Quote from master G

You will need to pair the card to an old standard definition official decoder, any model. A phone call to sky is required as you will need to give them the serial number of the old sd decoder. If you have a hd package cancel it as hd cannot be decoded in any third party receiver, other than BT sports, setanta and a few others.

Thanks once again m8 I downloaded the image but i cant ftp with dreambox control centre, it comes up telenet login in incorrect, Any ideas m8 as this is the first time this has happened to me with an image

Quote from master G

You don`t need to pay anyone buddy. Here is a ready to go image -> command 15d 500s 3 cams.. I`m not sure if this image has configs, so i`ve attached the oscam configs for you..

FTP config files to /var/tuxbox/config

If this is a white uk card and has been inserted in the official hd decoder the card will be paired and won`t work in any other receiver.. There is a few things you need to do to get it working again..

Hi m8 this is doing my nut in.. I installed the above image and i inserted my sky card but it wont clear my channels .. I thought maybe my card was locked but i put it into my daughters vu solo 2 and the card opened channels ,, What else could I look for in my dbox image ,,, Thanks for any help buddy.

Quote from master G

Login to the oscam web interface in a browser window like this http://192.168.1.92:8888
192.168.1.92 is the ip address of the dm500
Restart oscam then copy and paste the live log here from startup and from zapping on the premium movie & sports channels..

Thanks m8 I dont have the movies and sports (yet ) just the basic channels package Discovery etc.. Im going to upgrade if i can get this to work buddy. But as i said earlier the box wouldn't even open the discovery channels on the dbox but they opened on the vu box. Sorry for all the dumb questions btw.

Quote from master G

No worries, just show us the log and we should be able to figure out what the issue is..

Thats the problem Master G I cant get logged in to the ip address link you sent me ( you can tell now im not to well up on this stuff )
So far all i have done is added the image file and ftp the oscam setings you sent me , I then inserted my skycard into my dreambox to see if it would clear my basic channels ( but alas it wont ). I havent at this point inserted any c or n lines into the image.. Can you forward me an idiots guide as how to get this sorted for me please :-) thanks in advance....

Quote from master G

If you are trying the link i sent http://192.168.1.92:8888 it won`t work.. Change 192.168.1.92 too the ip address of your dm500, then paste it into a browser like firefox and press enter.. If it doesn`t work try a different browser or check oscam is started and running..

2015/10/14 14:38:53 1011CAA8 r (reader) SKYUK [internal] Reader sci internal, detected box type: dm500
2015/10/14 14:38:54 1011CAA8 r (reader) SKYUK [internal] card detected
2015/10/14 14:38:55 1011CAA8 r (reader) SKYUK [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2015/10/14 14:38:55 1011CAA8 r (reader) SKYUK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/10/14 14:38:55 1011CAA8 r (reader) SKYUK [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/10/14 14:38:55 1011CAA8 r (reader) SKYUK [internal] Buffers readed 0 bytes total time_us 75344
2015/10/14 14:38:56 1011CAA8 r (reader) SKYUK [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] card system not supported
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] Normal mode failed, reverting to Deprecated Mode
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/10/14 14:38:57 1011CAA8 r (reader) SKYUK [internal] Buffers readed 0 bytes total time_us 76046
2015/10/14 14:38:58 1011CAA8 r (reader) SKYUK [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/10/14 14:38:59 1011CAA8 r (reader) SKYUK [internal] card system not supported
2015/10/14 14:38:59 1011CAA8 r (reader) SKYUK [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/14 14:38:59 1011CAA8 r (reader) SKYUK [internal] card initializing error
2015/10/14 14:38:59 00000000 s (main) init for all local cards done
2015/10/14 14:38:59 00000000 s (anticasc) anti cascading disabled
2015/10/14 14:38:59 1013ACA8 c (client) plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))
2015/10/14 14:39:00 1013ACA8 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Detected /dev/dvb/card0/demux0 Api: 1, userconfig boxtype: 1
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0960 ECM_PID: 0508 PROVID: 000000
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0508 PROVID: 000000
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0963 ECM_PID: 0508 PROVID: 000000
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 0)
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 1)
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 2)
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in PMT
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 serving srvid CCD8 (0960@000000:CCD8 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/10/14 14:39:00 1013ACA8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/10/14 14:39:03 1013ACA8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/10/14 14:40:09 1013ACA8 c (-) -- Skipped 21 duplicated log lines --
2015/10/14 14:41:10 1013ACA8 c (-) -- Skipped 20 duplicated log lines --

Quote from master G

Is this a white or red uk card ?

White masterg But it will decode if i insert it into my daughters vu solo

Just noticed ur a Norn Iron man,, Im from up the North coast, hence BANN in banntheman :-)

- - - Updated - - -

Hi master G do you require any more info from me or need me to try anything else..

- - - Updated - - -

Thanks for all ur help Master G. I know u tried ur best to sort me out but I guess it wasn't to be. I will just give up on this one buddy,, sincerely thank you for all ur hard work G

Hi master G.. I have the card sorted now I got the hold of an amstrad and phoned sky and they paired it to my sd sky box. I stuck it into my dm500s and my scrambled channels cleared. What is my next procedure to get this card up and running for sharing before i upgrade to sports films etc.. Live log below 2015/10/19 13:51:50 1011E868 r (reader) SKYUK [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2015/10/19 13:51:50 1011E868 r (reader) SKYUK [internal] Cannot open device: /dev/sci0
2015/10/19 13:51:52 1011E868 r (reader) SKYUK [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2015/10/19 13:51:52 1011E868 r (reader) SKYUK [internal] Cannot open device: /dev/sci0
2015/10/19 13:51:54 1011E868 r (reader) SKYUK [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2015/10/19 13:51:54 1011E868 r (reader) SKYUK [internal] Cannot open device: /dev/sci0
2015/10/19 13:51:56 1011E868 r (reader) SKYUK [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2015/10/19 13:51:56 1011E868 r (reader) SKYUK [internal] Cannot open device: /dev/sci0
2015/10/19 13:51:58 1011E868 r (reader) SKYUK [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)
2015/10/19 13:51:58 1011E868 r (reader) SKYUK [internal] Cannot open device: /dev/sci0
2015/10/19 13:51:58 1011E868 r (reader) SKYUK [internal] Deactivating card
2015/10/19 13:51:58 1011E868 r (reader) SKYUK [internal] Error:Sci_Deactivate ioctl(IOCTL_GET_IS_CARD_PRESENT) failed.(9:Bad file descriptor)
2015/10/19 13:51:59 00000000 s (main) init for all local cards done
2015/10/19 13:51:59 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2015/10/19 13:51:59 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/10/19 13:51:59 00000000 s (anticasc) anti cascading disabled
2015/10/19 13:51:59 1011E308 c (client) plain dvbapi-client granted (linuxsatsupport, au=on (1 reader))
2015/10/19 13:51:59 1011E308 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2015/10/19 13:51:59 1011E308 c (dvbapi) Detected /dev/dvb/card0/demux0 Api: 1, userconfig boxtype: 1
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0960 ECM_PID: 0508 PROVID: 000000
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0961 ECM_PID: 0508 PROVID: 000000
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0963 ECM_PID: 0508 PROVID: 000000
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 skipped stream CAID: 0960 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 0)
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 skipped stream CAID: 0961 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 1)
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 skipped stream CAID: 0963 ECM_PID: 0508 PROVID: 000000 (Same as ECMPID 2)
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in PMT
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 serving srvid CCD8 (0960@000000:CCD8 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
2015/10/19 13:51:59 1011E308 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/10/19 13:52:02 1011E308 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/10/19 13:53:10 1011E308 c (-) -- Skipped 21 duplicated log lines --
2015/10/19 13:54:11 1011E308 c (-) -- Skipped 20 duplicated log lines --
2015/10/19 13:55:13 1011E308 c (-) -- Skipped 20 duplicated log lines --
2015/10/19 13:56:14 1011E308 c (-) -- Skipped 20 duplicated log lines --
2015/10/19 13:57:16 1011E308 c (-) -- Skipped 20 duplicated log lines --

Quote from master G

The configs used will update entitlements, so you don`t need to do anything else if you want to upgrade the sport or movies..

Create a dynamic hostname / dns address @ no-ip or dyndns.. Set these details in the router or use the client updater provided on those websites..

Open the CCcam port in the router pointing to the local ip address of the dm500. The CCcam port can be found in oscam.conf. Don`t use the default port 12000.

Code

[cccam]
port = [COLOR='#FFA500']12000[/COLOR]

Setup an [account] in oscam.user for each peer:

Code

[account]
description                   = peer1
user                          = [COLOR='#FF0000']linuxsat1[/COLOR]
pwd                           = [COLOR='#FF0000']support1[/COLOR]
group                         = 1
keepalive                     = 1




[account]
description                   = peer2
user                          = [COLOR='#FF0000']linuxsat2[/COLOR]
pwd                           = [COLOR='#FF0000']support2[/COLOR]
group                         = 1
keepalive                     = 1

Display More

C lines would look like this:

Code

C: [COLOR='#B22222']hostname[/COLOR] [COLOR='#FFA500']12000[/COLOR] [COLOR='#FF0000']linuxsat1 support1[/COLOR]
C: [COLOR='#B22222']hostname[/COLOR] [COLOR='#FFA500']12000[/COLOR] [COLOR='#FF0000']linuxsat2 support2[/COLOR]

Display More

Hi m8 sorry for the late reply but im only back from visiting at the hospital.. On my dm box if i have oscam turned on the cards wont scramble. I have to turn off oscam and turn on cccam to get the card to unscramble the channels .. Is this normal.. also i have a dynds account.. Is it better to use thier updaters m8. Lastly is it better for me to change the port in oscam.conf from 12000 to any number I want or is there designated numbers I have to use, could you give me an example of how to do this please,, Sorry for these questions but i want to learn all this stuff Master G

Quote from banntheman

Hi m8 sorry for the late reply but im only back from visiting at the hospital.. On my dm box if i have oscam turned on the cards wont scramble. I have to turn off oscam and turn on cccam to get the card to unscramble the channels .. Is this normal.. also i have a dynds account.. Is it better to use thier updaters m8. Lastly is it better for me to change the port in oscam.conf from 12000 to any number I want or is there designated numbers I have to use, could you give me an example of how to do this please,, Sorry for these questions but i want to learn all this stuff Master G

Right here is were I am so far.. I have a no ip host address ( ##########.servebeer.com ) I edited the oscam conf. ccam port from 12000 to 12012... I opened the services in my router and added Service==d/box... and port 12012. This is as far as i got because im unsure of the how to enter my host and the settings required for firewall rules.. Im really looking for help on this please..