Hello,
I flashed my VUPLUS DUO4KSE with openpli 9.2 but
I have the openatv logo 7.6 at boot which is always displayed first.
How can I fix this problem ?
Before was openatv7.6 on the box
Tanks for help
Jack
Vu+ 1st splash screen! (Different from enigma2 image team)
- G_ogi
- Thread is marked as Resolved.
There are 36 replies in this Thread which was already clicked 26,065 times. The last Post () by abu baniaz.
-
-
you need a bootlogo.mvi file, and that has to be flashed to box or if memory serves me right can be ftp"d. But have a look here
Bootlogo changenow I get that black and white logo at start of the box for lots off seconds.Is it possible to change that in another bootlogo ( frozen )witch I had on my…world-of-satellite.com -
You need to flash a new splash_auto.bin
720 x 576 24 bit bmp file
-
Hello,
How and where to put this file ? on the usb image flash ?
regards
Jack
-
ATV replaces the manufacturer logo during usb flashing. There are vu+ splash screens on the pli wiki page. You have to flash them by USB. This will not affect the image.
This screen is nothing to do with Enigma2 and shown by the receivers bootloader.
-
The wiki page is on link below. There is link on the wiki to a download for all the Vu+ splash screens
https://wiki.openpli.org/Receivers:Vu
-
ftp yes user share botlogo mvi
-
His issue is/was not the backdrop used by Enigma2, it is/was the Manufacturer splash screen used by the bootloader. It cannot be transferred by FTP and has to be flashed by USB like a normal image.
-
Instructions from Willo3092...
You can flash the splash screen on a hisilicon box from putty/telnet. I've changed mine on 3 boxes. An AX61 and 2 x SF8008's.
1. Just copy logo.img to /tmp
2. Connect to the box with putty/telnet and cd /tmp
3. Then issue the following command: dd if=/tmp/logo.img of=/dev/block/by-name/logo
4. Reboot and new logo should be there.
I used Filezilla to transfer the logo.img to the /tmp folder on my SF8008, quit Filezilla, logged in with Putty, followed the instructions from Willo3092, rebooted and it worked.
-
abu baniaz
Changed the title of the thread from “How to make and change an Enigma2 splash screen!” to “How to make and change a Receivers splash screen! (One displayed BEFORE Enigma2 starts)”. -
VU+ ULTIMO 4K incorrect display on the display, when loading another image, with any installed image a Black hole appears on the display, how can I solve the problem
-
-
Bootlogo changenow I get that black and white logo at start of the box for lots off seconds.Is it possible to change that in another bootlogo ( frozen )witch I had on my…world-of-satellite.com
-
That is the manufacturer splash screen. Have a look on the pli wiki, there is a link to a post on their forum with files that you have to flash by USB.
-
Can I solve the problem with the flash "ultimo4kRepair"? Has anyone done this flash before?
Put this on it like you would flash it
Then a regular image will fix it
-
just use dream logo generator
https://world-of-satellite.com/threads/dream-bootlogo-generator-vu-and-dreambox-800-8000.19315/
-
This update is to fix stability issue in Ultimo4K. If you don't have stability problem in your Ultimo4K, you don't need this update.
This Bootloader should be used for Ultimo4K only. Otherwise it will crash the box.
** Brief explanation of bootloader update **
1. Unzip the update file to USB stick.
2. There should be only 4 files, "bolt_auto.bin, bolt_auto.md5sum, bolt_auto.model and force.update" in /vuplus/ultimo4k/. Please delete other files in /vuplus/ultimo4k/ to avoid unexpected result.
3. Insert USB stick into the USB port of Ultimo4K and switch on the box.
4. It takes about 30 seconds to update.
5. If you see the message Remove USB and reboot"" in the display, remove the USB stick and restart the box.
The bootloader files - bolt_auto.bin, bolt_auto.md5sum, bolt_auto.model and force.update - should be deleted from USB stick after update is completed. If there are both bootloader files and image files, only bootloader update will be accomplished. So you need to delete bootloader files in USB stick to update a new image in the future.
-
Hello
Yes: This issue happened to me. I flahed the boot logo with USB and now the VU plus logo shows.
-
abu baniaz
Changed the title of the thread from “How to make and change a Receivers splash screen! (One displayed BEFORE Enigma2 starts)” to “Vu+ 1st splash screen! (Different from enigma2 image team)”. -
Posting this from PLi wiki/forum (with permission and minor edits)
You will need a USB flash drive which must be in fat32 file system. Ideally 8GB or smaller.
- Unzip the attached file
- Transfer the "vuplus" folder to a USB flash drive.
- (It contains sub-folders for the following receivers: duo2, solo2, solo4k, solose, ultimo, ultimo4k, vuduo4k, uno, uno4k, uno4kse, zero, zero4k and the Duo 4K SE. The correct one will be flashed)
- Reboot your receiver
- Flash the 'image' (This will take a few seconds). This will not affect the Enigma2 image on your receiver, it just flashes the manufacturer splash screen.
- When the flash is completed, remove the USB plash drive
- Restart your receiver
Your guide to Enigma2 image flashing and setup
Access tutorials for firmware installation, initial configuration, and essential first steps for your receiver. Flash and setup your Enigma2 receiver. Get detailed guides and community help for installing and configuring new system images.
