Posts by pheonix

  • evo xfinity xbmc.....how to start emulators/ ccam

    Quote from Lavatronics

    Rather than me answer that straight away would you care to comment on why ViX has not officially supported the Opticum AX-ODIN and EVO M7 receivers before now?


    Because we have no interest in supporting these receivers officially or otherwise. you are more than welcome to build ViX images as you are currently doing, but we wont provide any form of support for them, that's for you do sort out your self. same as with others who build unofficial images for other unsupported hardware.


    ultimately which receiver gets ViX support comes down to andy black, he's the one who does the hard work and he's the one who decides who he offers his support for.

  • evo xfinity xbmc.....how to start emulators/ ccam

    Quote from Lavatronics

    Because you have a commercial interest in supporting the commercial ViX images. I had hoped I had been at least of some use in pointing some in the right direction with the EVO Xfinity receivers in this thread, sadly it seems to have taken to personal attacks now, unfortunately at this point then I would bow out. Any genuine customers of ours who require genuine help by all means get in touch and we will as always do the best we can to help. Thanks.


    I have never had a commercial interest in ViX or any other image, I am not a trader, just a private owner using my hardware to test the ViX image on it.

  • evo xfinity xbmc.....how to start emulators/ ccam

    Quote from Lavatronics

    You were not a Lavatronics customer, you purchased from the Irish distributor but ended up coming to our forum for support, I'm afraid you need to speak with your own countries supplier for support in this case, it's not something we had decided to support online channel list wise and still take this view, it's a technical support forum only for Lavatronics customers, sorry we couldn't help but then it really wasn't our place to be helping in this instance.



    so what happens when a customer of yours comes to you for help with one of the unofficial ViX Zeus images your touting for the EVO line on your site ?, are you going to give them full support or palm them off as usual i wonder ?.

  • FW Upgrades

    Quote from pheonix

    I would not worry about it mate, it's the same with a lot of the none enigma ( closed source boxes ), you get a official update once in a while but you get a lot of these patched or unofficial updates. It's likely just a way to keep things above board and on the rite side of the law. I have a Ferguson ariva receiver and they do this all the time.


    official updates = FTA so no cam support or illegal movie sharing servers etc.
    Patched or unofficial updates = tend to include every thing else allowing plausible deniability from the manufacturer.


    That said it would be nice to see a proper change log released with these patched firmwares, instead of the usual "and more changes" rubbish, so you know exactly what your getting.

  • FW Upgrades

    I would not worry about it mate, it's the same with a lot of the none enigma ( closed source boxes ), you get a official update once in a while but you get a lot of these patched or unofficial updates. It's likely just a way to keep things above board and on the rite side of the law. I have a Ferguson ariva receiver and they do this all the time.


    official updates = FTA so no cam support or illegal movie sharing servers etc.
    Patched or unofficial updates = tend to include every thing else allowing plausible deniability from the manufacturer.

  • evo xfinity xbmc.....how to start emulators/ ccam


    LOL i never posted a wrong work on their forum, and i was banned. personally i would never consider buying from those cowboys after the alien debacle. They tout them selves as experts and the second you ask for help your gone. how there still in business is beyond me.

  • FW Upgrades

    The unofficial updates you see here and else where are largely fixes for various encryptions or keys etc, There pretty much useless for your intended region ( north america ) unless stated otherwise in the changelog.


    That said there is nothing stopping you from using them.

  • May I upgrade my openatv 3.0 to 4.0 ?

    ATV the same as ViX and all other OE-A member teams now uses a totally new OE build environment, which is vastly different from the one the 3.xx series images was based on, it's just not possible to use backups from one platform to another without causing massive problems for your self, this is why andy took the radical step of disabling the restore function between ViX 3.0 and Zeus.


    you can still backup things like bouquets, timers.xml and autotimers.xml files and any cam config files but you should not use the inbuilt backup feature for this. That said do make a full backup of your current image so you can use it again if the 4.0 image series is not to your liking.

  • tsmedia 5.5 issues

    Quote from alom

    If it don't work. .. Let people know what your problems are and if they don't get resolved. ... Don't use it. ..... But to have a go at the devs.... That's just stupid/pathetic... Take your pick ..


    Sent from my SM-N9005 using Tapatalk


    Unfortunately thats the norm in the E2 community. makes me wonder why i bother putting in 70 plus hrs a week into helping people / beta testing images and plugins etc, just to get grief when a users free plugin does not work to his liking. god only knows how plugins devs like mfaraj57 continue to work on without throwing the towel in and walking away.

  • evo xfinity xbmc.....how to start emulators/ ccam

    Quote from bjx1

    hi i bought one of these boxes from sat-shop.co.uk and i cant get any help or answers what so ever from them they have blocked me from the support forum for telling them they had released the box for sale without any real understanding of how it works or any support for its customers,


    sadly that's the common thing when users ask for help from them, they are more than happy to take your cash but ban you in a second if you ask them for support.

  • tsmedia 5.5 issues

    Quote from dreamboxjim

    why mess with these things and release them before they are tested proper? just my thoughts, anyone else?


    you'r not dealing with a multimillion dollar, international corporation the likes of Apple or Microsoft you know, as with ALL E2 devs your dealing with one person or a small team of amateur's who work out of their own time and expense to bring you these plugins.


    Just though i'd point that part out.

  • Vix won't update

    sorry but what has that got to do with the online update ?.


    and yes we are aware of the issue, it's a corrupt count file on the server but we have to wait for the server admin to sort it out, i will post direct links for all Zeus 011 image builds a little later, when things at work get a little quieter.

  • OpenViX Zeus Updates and Changelogs.

    OpenViX-Zeus 007 AVAILABLE NOW



    OpenViX Zeus-Enigma2 GIT CHANGELOG




    OE-ALLIANCE GIT CHANGELOG






    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command
    init 4 && opkg update && opkg upgrade && init 6


    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here


    OE-ALLIANCE GIT-CHANGELOG
    Click Here


    ALL COMPATIBLE SOFTCAMS are now hosted directly on the OPENVIX Download center along with the images.
    Links Below.


    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here




  • Pause when turning over channel

    Picons are best stored on the flash of the receiver, it is by far the fastest available location but if thats not possible a USB stick is acceptable, but it will have to be inserted permanently.


    EPG data is by far best stored on the internal HDD, it wont affect system performance in any way at all, EPG data is held in live memory aka the flash and only written to or read from the HDD at boot up and shutdown. There is no advantage to storing the EPG on a mounted USB stick but it will work happily if you do decide to use this location.

  • Pause when turning over channel

    Quote from Dave20

    Hi
    No its on every channel I turn to.. And yes I've installed picons I think their on the HDD.. Sorry I'm a bit of a newbie.


    Thats why then, storing picons on a HDD causes the HDD to have to spin up on every channel change, this can easily add a 5 second lag to channel zapping times.

  • OpenViX Zeus Updates and Changelogs.

    OpenViX-Zeus 003 AVAILABLE NOW




    OpenViX Zeus-Enigma2 GIT CHANGELOG



    Code
    openvix: build 868[VideoEnhancement] add missing import, due to one of the cleanup's[EPGCache] better control overtime, so EPGCache is loaded when time is set/changed.[ChannelSelection] fix Alpha/Number jumping in list, also remove the need for E2 restart when changing setting.[AudioSelection] fix possible BSOD.openvix: build 867[EpgList] optimise and fix png's in GraphicalEPG.[AVSwitch] fix possible BSOD.[InfoBarGenerics] open DreamPlex via LongPVR if installed.[ChannelSelection] fix cometic issue.[InfoBarGenerics] remove RED swap focus for PiP, as it not needed.[EpgSelection] fix 'Zap & Exit' on InfoBarEpg.Merge remote-tracking branch 'pli/master', skips commits that are not needed.[Audio] add MultiChannel PCM support.Add config option to startup enigma2 in standby modeSolve typo in skin_default.xmlAdjust default skin to NumberZap changesMake Numberzap summary screen for VFD display less complicatedSolve issue with TunerInfo as suggested by Dima73[Translations] NL update.[Translations] NL update.Add NumberZapSummary Screen (support) `Update de.po[keymap] fix some long button press issues.Merge remote-tracking branch 'pli/master'[InfoBarGenerics] help with plugin's[SoftwareUpdate] fix release notes.[EpgList] fix the 'I' icon in text mode, adjust the max 'I' width to 150 pixels, make 'pre', 'post' and 'prepost' icons black when selected as per request.[EpgList] add option to set width before showing the 'I' icon.[Components] fix possible BSOD.Solve a logic mistake induced in commit c8472e///For HDMI IN save resume point on current service typeMake access to PiPzap functionality more easierSolve type in previous commit as ")" was on a currect placeOptimize some code in ChannelSelection.py as adviced by AdhoikUpdate of encodig.cong as suggested by simon_ttp[parentalcontrol] fix possible BSOD.[ChannelSelection] PiP Selection, add a delay to scroll keymap on shown.console.cpp: Remove cryptic debug messagesAdd possibility to remove native key binding[TimerEntry] replace dot with space in date line.Update de.poUpdate de.poMerge remote-tracking branch 'pli/master'[InfoBar] move Long button press into own class.[InfoBarGenerics] fix typo on Info Button.[InfoBar] fix BSOD on OK press.add missing audio_defaultddp setting[InfoBarGenerics] use new method for detecting a LONG button press.[EpgSelection] use new method for detecting a LONG button press. see example below[InfoBarGenerics] properly detect a LONG button press.[Setup] fix item move on changing value.[Translations] NL update[config] fix a possible BSOD.[InfoBarGenerics] tweak PiP zapping.[config] add support to pass extra arguments to the run notifier.[setup] cosmetic tweak.[UsageConfig] tweak recording tuner priority. Credit 'Dima73'.Simplify some code regards latest HDMI-IN selection button changesOptimize some code as self.servicelist was already in slist[branding] some branding tweaks.Merge remote-tracking branch 'pli/master', skipped quite a lot of commits as not needed.Move prefered tuner for recordings to custimize setupDo not search on other bouquets when service is HDMI-INAdd PIPZAP to HDMI-IN button and do not use extra last service variable[PictureInPicture] Zapping tweaks.Some finetuning and remove debug code for HDMI-IN key supportAdd HDMI-IN supportnext fix for teletext and oled display on dmm[InfoBarGenerics] fix possible BSOD (InfoBarHdmi).fix oled problem and teletext on dmm[UsageConfig] tweak recording tuner priority. Credit 'Dima73'.Solution for default tuner and default record tunerMovieList: Fix typo[HDMI-IN] add support form HDMI-IN button, short to view as fullscreen, long to view in PiP.[InfoBarGenerics] add LONG Ch +/-  to channel skip for PiP.Small adjustment to prefer recording tuner[Translations] NL update[UsageConfig] tweak to recording tuner priority. thanks 'Dima73'.MovieSelection: Play next audio file regardless of selection bar posbase/console: Use buffer on heapAdd snr in db for VU's 6211 tunerRemove progress bar and bigger characters for channel name[Translations] NL updateSlightly bigger characters for channel name display VU2/ET10KTry to solve possible GSOD with some pluginsRcModel: refactor to allow support of all receiversMove changeEntry to ConfigListPut back declaration of on ChangeEntry in Setup.pyRemove obsoleted inChangedEntry declarationAdd extra check if description key existsRemove some obsolete codeOptimize some code so it is not on two locationRemove not required import os in StartWizardAbout: use HardwareInfo() to get hardware infoStartWizard: use HardwareInfo()HardwareInfo: refactor and enrichVideoHardware: Remove unused variableWirelessLan: remove unneeded HardwareInfo importPackageinfo, SoftwareTools: use HardwarInfo() directlyRevert "ScanSetup: Add support for front display"Support frontdisplay for most configsScanSetup: Add support for front displayopenvix: build 866More changes to display for ET10K and VU+DUO2Merge remote-tracking branch 'pli/master'.Enigma2 ac3+ cache add patch[ChannelSelections] fix BSOD when pressing REC button.FrontendInfo: Do not show empty slots in STRING typeSome optimalizations for fontdisplay VuDuo/ET10000[InputDevice] fix syntax.Sorry I forgot to declare res_mgr in FrontendInfoAdd new STRING type to FrontendInfo[SkinSelector] resize preview pic, (needed for HD skins).[/COLOR]





    OE-ALLIANCE GIT CHANGELOG



    Code
    openvix: build 003[openvix] bootlogo tweak quadplus lcd bootsplash.[branding] rebuild branding lib every build, as things like driver version need check on every build.openvix: build 002[azboxhd] fix hdmi audio[openvix-bootlogo] fix quadplus.[dreambox] fix build DM800 patch provided by devzeroadd forget bb file last commitadd python-requests to feed[sogno] update drivers 10.3.2014Egami update[vuplus] update drivers 20140310  - Fix PCM MultiChannel problem(solo2, duo2)  - Fix vtuner PIP  - Fix Dual tuner loop-through input from single tuner(duo2, ultimo)openvix: build 001[openview] fix typo.[tuxtxt] try out new font view.Update tuxtxt-enigma2.bbUpdate tuxtxt-enigma2.bb[3rd-party plugins] Update.return info panel[oe-alliance-skins] fix typo.[oe-alliance-skins] fix RDEPENDS for 'neonovum' skins.[inihdp] revert driver change this breaks retail marvel box, please do not add non public beta drivers for boxes not releaseremove dead distros minicattv forum are close and stop all[inihdp] udpate drivers 2014-03-05[inihdp] udpate drivers 2014-01-29[openatv] tuxtxt update configadd support Axas E3HD DVB-C Model[ixuss] update drivers 07.03.2014[xtrend] update kernel 3.13.6[HDe] Updated DVB-T2 tuners[3rd-party plugins] Update.[dm800] fix branding[openvix] bootlogo for for Vu's.[openvix] tweak bootlogo bitbake.Update enigma2-plugin-skins-metrix-atv.bb[vuplus] blindscan support on vusolo2.[gbsolo] fix jffs2 depends[GigaBlue] Fix MKUBIFS_ARGS gbquad, gbquadplus MKUBIFS_ARGS = "-m 2048 -e 126976 -c 4096"[dm800] remove wrong kernel patch[branding-lib] bump PR as vu driver have been updated.[vuplus] driver fix typo in date.[solo2] update machine features to include DVB-S Blindscan.[vuplus] Update drivers 20140306[openvix] bump version of Core pluginUpdate enigma2-plugin-skins-metrix-atv.bb + postinstMerge branch 'branding' of ssh://github.com/oe-alliance/oe-alliance-core into branding[xtrend] update et8k anset19k drivers 28.2.2014Update enigma2-plugin-skins-metrix-atv.bbUpdate gb800solo.confMTD Kernel updatesupdate ${MTD_KERNEL} for oem[openatv] MetrixHD Remove MyMetrixLiteColors on install[vuplus] fix previous commit, by updating to the latest version.[vuplus] dvbmediasink updated to latest version, patches supplied by Pli.[openvix] revert to original boot logo's[evo] update drivers and kernel move to new download url[gigablue] dvb-modules ! harmonize nomenclature (filenamings) ! SEplus/UEplus/Quadplus switch from archiv.openmips.com/beta to archiv.openmips.com/[gigablue] initrd.bin switch zip to tgz[pngquant] fix LIC checksum.[openvix] Zeus Release.[dags] update kernel 20140301Deleted ViX 28.2E settings as they were obsoleteEgami removed some plugins[openMips] Update bootlogo, splash, lcdsplash, lcdwaitkey, lcdwarningRevert "[openMips] Update bootlogo, splash, lcdsplash, lcdwaitkey, lcdwarning"[openmips] bootlogo bump PR[openMips] Update bootlogo, splash, lcdsplash, lcdwaitkey, lcdwarning[openmips] add enigma2-plugin-systemplugins-osdpositionsetup[openmips] update feeds[openmips] add new spinner[openmips] add enigma2-plugin-systemplugins-positionersetup[openmips] update bootlogo





    Images can be downloaded directly from the OpenViX server ( Link Below )
    or via a online update
    menu> setup> software update.


    or via a telnet session with the following command


    init 4 && opkg update && opkg upgrade && init 6



    OpenViX-Zeus-Enigam2 GIT CHANGELOG
    Click Here



    OE-ALLIANCE GIT-CHANGELOG
    Click Here



    ALL COMPATIBLE SOFTCAMS are now hosted directly on the OPENVIX Download center along with the images.
    Links Below.



    OpenViX-IMAGES
    Click Here


    OpenViX-CAMS
    Click Here


    OpenViX Tutorials
    Click Here

  • new image

    Quote from stevejo

    yes it will be but they will tell you it corrupts the image and leaves traces after removing it , i have never had an issue,and it takes 2 minutes to flash a box at worst



    No one has ever claimed any such thing, It's TSpanel we advise against using not the linuxsat plugin.