The following Tutorial aims to show you how to create a Full image backup using ViX 3.0 ( ALL Supported receivers ) in a easy to follow and understand tutorial, to read this tutorial you must have a .pdf reader installed. I recommend the following Free .PDF reader as it is what i use my self.
http://www.foxitsoftware.com/Secure_PDF_Reader/that can't be correct because I've downloaded a "backup open pli 2.1 for clone 2.1 sim" which has icefilms working fine".... yet I'm struggling to install it on a DM800SE A8P with openpli 2.1.
The image your using needs the OE 1.6 or python 2.6 version of the ipk, the newest images tend to be OE 2.0 or OE 3.0 which need the python 2.7 version.
If I were you I'd upgrade your image as OE 1.6 is slowly going to be phased out the same way that enigma1 images have been.
Sent from my iPad using Tapatalk HD
OpenViX 3.0-664 AVAILABLE NOW
OpenViX-Enigma2 GIT CHANGELOG
openvix: build 664
[settings] fix typo.
openvix: build 663
[settings] fix channel number in infobar.
openvix: build 662
[InfoBar] fix possible BSOD.
[InfoBar] option to show/hide channel number.
openvix: build 661
[TimeShift] hide a message.
[UsageConfig] fix typo.
Update de.po
[UsageConfig] fix ZapMode configuration.
[ChannelSelection] slight cleanup.
[PliExtraInfo] fix possible BSOD.
Merge commit '5468afb6a450eb207540cfd5b430a394223a55ff'
openvix: build 660
PliExtraInfo: For DVB-T give freq in MHz instead of KHz
receivedTsidOnid: fix appending signal callback
Merge remote-tracking branch 'pli/master'
[TimeShift] 3rd stage cleanup and recode of timeshift.
[TimerList] add dived line to list view.
PLiExtraInfo: Use not translated raw data to determine it is DVB-T
Fix cursor issue when manualy adding an userbouquet
eStaticServiceM2TSInformation: implement getFileSize
openvix: build 659
transponderDataToDict: symbolrate is unsigned, check for value > 0
frontendparms: return -1 for invalid properties
AutoDiseqc: follow requestTsidOnid changes
PliExtraInfo: Adjustments for DVB-T
diseqctester: small fix, should be working again now.
[Translations] RU updated; thanks Sowa
add Kurdish language/translation by dimili21
ZapError: When Messagebox is instantiated disable input and timeout
iStaticServiceInformation: do not use getInfo to get filesize
eServiceDVDInfoContainer: fix logic typos
iServiceInformation: wrap sCAIDS and sCAIDPIDs
iStreamData: add caid info
implement commonly used iStaticServiceInformation objects
iDVBChannel: rewrite requestTsidOnid
pcore: add python wrapper for getRecordings
pmt: add python getCaIds wrapper
move eBase / eConsole python wrappers to SWIG interface files
[InfoBarGenerics] add some backward compatibility.
pmt: fix filling demux / adapter fields in programinfo
iDVBFrontend swig wrappers: wrap PyObject* in ePyObject
frontendparms: fix eDVBSatelliteTransponderData::getModulation()
Avoid GSOD in case frequency and modulation are not a string
Finetuning block keypress when Notificaions are shown
servicemp3/servicedvd: add wrappers for custom getInfoObject
swig wrappers: add sanitychecks
remove obsolete SWIG defines and macros
iStreamedService: remove python stuff from getBufferCharge
remove python-specific code from the c++ core
getConfigBoolValue: accept true/false as well as True/False
pythonconfig: create a config objectOE-ALLIANCE GIT CHANGELOG
openvix: build 664
openvix: build 663
openvix: build 662
[kmod] update URL to use kernel.org and bump version to v13
[dm800se] fix kernel crashing kernel to big we must remove some kernel features and add modules
[vuplus] vusolo2 Update driver
[vuplus] vuduo2 Update driver
[dreambox] fix dm800se build
[dreambox] fix clean build missing file
update kmod again
kmod new url
disable kmod use oe-core bb file
openvix: build 661
[vuplus] add Linux 3.3.8 for vusolo2/duo2
openvix: build 660
[xtend] update Kernel 3.8.7 and drivers 04.05.2013
[vuplus] update drivers. (excluding vusolo2/vuduo2, as those require new kernel (3.3.8) and that is no where near ready to use.
[vuplus-opera-browser] bump PR, make note of latest build available but do not build as it still has issues with OSD.
[sysvinit] build for machine arc, else SSCACHE will be used.
[sysvinit] fix build & patching.
[vuplus blindscan] simplify the bit bakes
[skin-default] remove depend as it stopped build for sscache.
[skin-default] build for sscache.
[odin] update drivers 06.05.2013
[openhdf] bumped build nr
[openhdf] changed spinner files
[openhdf] some changes in image files
[kmod] removed useless vim added i (sorry 4 that)
[kmod] removed outdated patch (Makefile has been changed), added --disable-manpages instead
openvix: build 659
[ChannelSettings] add some new settings.
[e3hd] fix kernel mtd device [odin] remove nolcd this was the wrong way
clean up gb800 nolcd not needed
update image version for e3hd
add new boxmodel E3 HD
fix vu modules init
revert 3271937731b59173233aca8794fe679820096421
[tuxbox] update satellites.xml
[vusolo] vu solo dont have a display now we disable the e2 function
fix typo last commit
[dm800] update did0700
bump build v4l driver dm800 kernel update
[dm800] fix shutdown
[xp1000] forget patch
Merge branch 'master' of ssh://github.com/oe-alliance/oe-alliance-core
[xp1000] add support eyeTV DVB-S2 Tuner
[gigablue-quad] rebuild kernel as config has changed.
add 1gblan into kernel default
[cable.xml] added some finnsh cable providers
update dreambox driver version
[dreambox] update drivers 01.05.2013 [dreambox] update kernel to patch level 44 [dm7020] update secondstage 88 new logo
Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.
or via a telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Enigam2 GIT CHANGELOG
Click Here
OE-ALLIANCE GIT-CHANGELOG
Click Here
ALL COMPATIBLE SOFTCAMS are now hosted directly on the OPENVIX Download center along with the images.
Links Below.
OpenViX-IMAGES
Click Here
OpenViX-CAMS
Click Here
No need to take permission because TSmedia-1channel code not taken or based on 1channel plugin code even i opened 1channel plugin after finished coding of TSmedia,also TSmedia includes more features than channel one plugin(search,classification accordings to many standards
also 1channel is available bfore TSmedia in mediaportal
1channel.ch site is for public and the script for 1channel parsing is available originally for xmbc and published since long time
The same is true for just about all the plugins in the OnDemand plugin but when this guy clings onto you it's easier to just give in because the more you try to give him the facts the more he just ignores them and spreads more false claims.
the commentary im getting on some channels is called ims audio description.solo 2 with vix
Do as suggested above to set your default preferred audio settings.
Sent from my iPad using Tapatalk HD
Display MoreJust wondering if you tried changing the setting:
Prefer audio track stored by service = Yes (set this to no)
Possibly if this is set to yes it takes precedent over your default selection.
Worth a try. beer10
Yep it's this one or the one I quoted, can't confirm which as I'm at work and not near a receiver to test.
Sent from my iPad using Tapatalk HD
Prefer AC£ track = Yes
.
Try with this set to no then reboot and see if there is a difference.
Sent from my iPad using Tapatalk HD
and if i want use E2 image ???
I can't speak for the alien2 but on Broadcom based e2 images you just need to place the picons in a folder named picon directly on the root of your chosen media such as a USB stick.
Sent from my iPad using Tapatalk HD
I know its too late now for this, but it is good practise to create a script to auto backup all configs to folder on your box & then move them to your PC.. I do this nightly at 23.59.
That's not needed mate, there is already a auto backup option in the image specifically for this, just enable this option and select your preferred save location and your good to go, all my 7 receivers are set to automatically create a settings backup between 03:00 and 03:20 directly to my NAS.
Sent from my iPad using Tapatalk HD
On this topic, is there any setting that allows auto selection of "ENG" Audio on all channels or set "ENG" as the default Audio? I noticed sometimes when I update bouquets that a lot of the Audio default back to "NAR" or something other than "ENG"
Thanks
Yes in the options you can select your default preferred language etc, but I can't think of the exact path to it at present.
Sent from my iPad using Tapatalk HD
Hi, having lots of problems with my image on vu+ duo, I would really appreciate it if someone could please upload a vix 3.0 backup with 1channel and on demand etc, I think I can instal plugins myself but always end up with more problems than I started with. Last one I installed was musogeek back up of 572 I think. Thanks :)
To be honest it is a very easy process to set up a new image if you take it one step at a time, there is even a tutorial on this very forum by my self detailing the whole process in easy to follow steps. You would be far better served if you setup your own image and no doubt users here will help you if you need it.
Sent from my iPad using Tapatalk HD
Thanks cazuela, it was the reloading of the channel list that sorted it. I gotta thank this forum again for its ongoing help in getting my Solo2 sorted!
A bit late to the party I know, but your problem was the satellites.xml file on the receiver had the wrong location for 4.8 east, similar to 28.2 east some users refer to it a 5 east or 4.8 east, once you have a accurate satellites.xml file your problems will have be solved as was the case when you loaded the new bouquets.
Sent from my iPad using Tapatalk HD
Havent come across that one before - where can you get them from? and how much are they - also - are there images for them....?
These are closed source receivers so your reliant on the manufacturers releasing updated firmware, I'm not sure if there are any patched versions available but you won't fine enigma style images for them.
Sent from my iPad using Tapatalk HD
Further to the above, I am using BH2.0.2E on a Solo2. Which of these goes in /usr/lib/enigma2/python/plugins/extensions?
The BH 2.x.x series images all use python 2.7 so use that one.
Sent from my iPad using Tapatalk HD
if your using the ViX image the ocram picons are updated automatically via the feeds when he releases new ones, this is often the cause of the flashing update icon without a changelog, if the picons have been installed via the feeds.
PS. As far as picture quality is concerned i think the open pli is best..
Picture quality is controlled by the drivers, no image can effect this other than some minor scaler tweaks, if all images are using the same drivers on the same hardware, the PQ difference is all in the users head.
There's nothing slanderous about my post, I was merely providing as much info as I could regarding the issue I have, I have 3 enigma 2 boxes all with the vix team image as in my opinion there is no better image. Sorry if I have offended you.
I would worry to much about him as he is always
very defensive about the vix team, personally i think the older versions were better...
Think you are over reacting here. The reason he made the post is because he was having difficulties with a plugin after updating an image. Quite a normal reaction to put 2 and 2 together and sometimes come up with 5. Isn't the point of a forum to ask for help and advice? I think that is all that was being done, and because it has created a discussion, we all know what the real issue is, and that it was coincidental that the firmware was updated at the same time. No real need to fly off the handle:waaaht:
The facts were already out before you put in your 2 pence worth.
I fully stand by my above statement it was because of similar alarmist posts that the whole ViX is doing something to stop us using softcams on our clones rumor erupted and many others, with no basis in fact what so ever.
it must be the latest vix image. Please help, thanks.
It has nothing what so ever to do with the ViX image and silly posts like yours are how unfounded, slanderous rumors get started, 1 channel is down because their site was recently hijacked forcing them to move the URL, the plugin still points to the old URL hence why it cant connect to any thing.
Thanks
Mostly related virtualkeyboard used with the plugin
no crash with dreambox,you can do favor by uploading the /media/hdd/crashlog
Crash logs on ViX are saved to /home/root/logs/ by default.
OpenViX 3.0-ANNOUNCEMENT
Due to the recent kernel changes for Vu+ Solo2 and the Xtrend receivers, we Highly recommend that you perform a full fresh flash rather than a online update, to eliminate any possible problems that could arise as a result of the kernel and drivers update. please note this only affects the below mentioned receivers and build numbers.
ALL xtrend receivers ( any build below OpenViX 3.0-660 )
Vu+ Solo2 ( any build below OpenViX 3.0-661 )
Dont worry a online update will still work but it is highly advisable if you are on a build lower than those stated above that you reflash the receiver rather than use the online update method.
please be aware if you do reflash your receiver, you will also have to re-install your plugins even if you use a settings backup. Due to changes in the kernel your plugins will not be restored even if you select yes when asked if you want to restore them.
also worth noting, a old ViX feature will be returning to the image from Build 664 whereby you can flash the receiver directly from within the image manager without the need for a USB stick ( Thanks andy ).
Images can be downloaded directly from the OpenViX server ( Link Below )
OpenViX-Enigam2 GIT CHANGELOG
Click Here
OE-ALLIANCE GIT-CHANGELOG
Click Here
ALL COMPATIBLE SOFTCAMS are now hosted directly on the OPENVIX Download center along with the images.
Links Below.
OpenViX-IMAGES
Click Here
OpenViX-CAMS
Click Here
