Display MoreI cant work the screen from work so I vpn'd home and got this
root@vusolo2:/etc# cat image-version
box_type=vusolo2
build_type=0
version=3.0
build=627
drivers=20130218
date=20130308221606
comment=ViX
target=9
creator=openViX
url=http://www.vuplus-support.co.uk
catalog=http://www.vuplus-support.co.uk
Thats a fairly old build now, try updating to a newer one.
Hi all just confirming I have this problem using an Openvix image created by MrGMX I will try the brightness setting tonight and see if that fixes it. I am using a Solo2 as well.
which exact image build ?
menu> information> about.
Thanks for the info. Btw Aussies are so hopeless with all the satellite discussion. What can I say Ill have to explore and google it.
i spent the better part of a day researching the channel numbers etc for a project to create a accurate channel bouquet for Australian users to follow the official channel line up, no one would even do a simple channel scan for me so i gave up, sadly it seems that out side of Europe no one bothers to produce channel bouquets.
i even went out of my way to get the popular picon makers to create Australian picon packs but again no one would supply me with the service reference updates.
long story short it seems your in for very little help unless you do it your self.
or ask in an Australian forum
you'll get the same answer on one of those too, i once asked fore some info on the main Australian forum as i was trying to get the aussie birds included in ABM and they just were not interested, their reply was pretty much scan for your self which was difficult as i'm in england.
i dont believe there is one youd have to make one your self.
Phoenix , when you say a direct clone do you mean its an exact copy? ie it runs any Solo image??? :-) , naughty openbox people!
pretty much yes, it runs a standard solo image, all the did was put it in a new case and change the name but its still just a solo clone.
The openbox-6000 is a direct clone of the Vu+ solo so unless the staff have changed their stance towards Vu+ clones i cant see a section being created for this receiver just yet.
press the audio button on your remote and select any audio stream other than N.A.R.
AutoBouquetsMaker is built directly into the image if it was not there then i dont know whats happened, are you sure your talking about ABM and not LraiZers Autobouquets plugin ??. as for 1channel i dont use it and i really do not recommend TSpanel be used with any ViX image as that in it self is known to cause all kinds of problems with the image, but thats your decision to make.
What exact image build do you have ??
Menu> Information> About.
as for ABM it's built into the image by default, if it's not there where did you get the image from ??.
What other plugins did you get, I have just purchased this as a second box, does anyone know if you can add auto bouquet maker?
ABM is included in the ViX image by default, infact i'm in the middle of writing a ABM setup tutorial rite now.
as for CrossEPG DO NOT add CrossEPG manually to the ViX image, ViX already has a highly modified version in the image, if you overwrite this with a standard version you will cause problems.
sadly he is not the only one on there, the place is full of scum.
https://www.facebook.com/Green***csThere has not been a FPGA update in many months, so if you have updated yours within the last 7 months or so there is no need to do it again, also remember that the FPGA is a firmware update and as such should not be performed unnecessarily to reduce the risk of problems such as the event of a power failure while updating.
cheers lads ...... all working on vix now...
but how come it works on some vix and not others...works for mckee25
no idea as i personally dont use this bouquet pack but i have seen reports of the same happening on multiple images including BH, DE and several other dreambox images. likely result is that the large satellites.xml file is filling the flash which would cause the bootloop - non booting box.
satellites.xml
thats where the problem is
just take a look how large it is
Thats a easy enough fix, just replace it with the following one. generated from
http://satellites-xml.org/OpenViX 3.0-656 AVAILABLE NOW
OpenViX-Enigma2 GIT CHANGELOG
openvix: build 656
[PermanentTimeShift] some small fixes to help History Zap.
[PermanentTimeShift] some small fixes for exiting timeshift.
[EpgSelection] fix 0 button zapping in Single epg.
[ZapHistory] reset delete point if forwarding throughout history.
[MoviePlayer] cleanup fix properly the BSOD.
openvix: build 655
[MoviePlayer] fix possible BSOD.
openvix: build 654
[PermanentTimeShift] first recode for better skipping of TimeShiffed events. < > button's can now also be used to skip events when in a timeshift state. (may require more Debugging and tweaking)
remove duplicate imports.
[ZapHistory] move zap history screen into ChannelSelection, also fix history so when you goto a history point and then zap to a new channel the history after that point is cleared and the new zap is added to history.OE-ALLIANCE GIT CHANGELOG
openvix: build 656
[odinm7] add vfdcontrol plugin
[tuxbox-common] bump PR.
[tuxbox] update satellites.xml
[3rdparty] update
fix typo
[3rdparty] update plugins [openatv] add dm flasher to image build
[3rd party plugins] Added SportMax
openvix: build 655
[sabnzdb] fix checksums.
[sabnzdb] fix checksums.
openvix: build 654
dont build evtest for old kernel <= 3.0
update sabnzbd to final 0.7.11 fix pidfile
push eopenplugins build
[axas] add default settings
[venton] Fixed DVB-USB support
Images can be downloaded directly from the OpenViX server ( Link Below )
or via a online update
menu> setup> software update.
or via a telnet session with the following command
init 4 && opkg update && opkg upgrade && init 6
OpenViX-Enigam2 GIT CHANGELOG
Click Here
OE-ALLIANCE GIT-CHANGELOG
Click Here
ALL COMPATIBLE SOFTCAMS are now hosted directly on the OPENVIX Download center along with the images.
Links Below.
OpenViX-IMAGES
Click Here
OpenViX-CAMS
Click Here
Thats the second infobar you need to activate it first.
Menu> Setup> System> user interface> settings> show second infobar ( mine is set to 5 seconds ).
Once enabled to access it just press the ok button twice.
Discovery realtime has closed and has been replaced by TLC.
looping on reboot for me too catseye on latest vix with vu+ duo
same for me spinning vix all the time had to go back to an old update
It's a known problem and catseye has released several revised sets to try and fix the issue as it's only his packs that are causing issues, This affects both ViX and BH ( and likely others ) to the point where BH have removed catseyes packs from their feeds ( or so i have been told ).
so at the moment id either try the very latest pack released tonight or go with the Vhannibal packs until the issue is resolved.
20.04.2013
-[OnDemand] update GUI for main menu.
27.04.2013
- [OnDemand] Fix OpenUitzending gemist (thanks Aux99).
01.05.2013
- [OnDemand] fourOD Feeds Update- The feeds for fourOD have changed to need to update the plugin to use
- new menu item tag.
