As master g said in earlier post omnikey 3121
Posts by monkified
-
-
Did you know what is minimal PC configuration is need for this OS linux?
I have one old PC and Im install new Linux 3 differents versions, Fedora etc, but PC cant work normally, its slowind sown.with speed.
Poslato sa Huawei P8 lite
I,m using a ten year old pc and it's working fine, I don't know what a dm500 spec is but it carnt be that high tech lol and they work ok. if you follow the Ubuntu tut then it should work but I did format my hdd and didn't save my operating system on grub and I just used Ubuntu Linux server version
-
That's a clone box pal for the price you will pay for that you'd be better off paying a few quid more for an original. I've had clones before there not a patch on originals, I'd go for an original like a Vu or miracle box, there's loads of original ones on the world of satelite website all of which will run dream plex
-
Have you got "fastest reader first " selected in config/load balancer and " prefer local cards " selected in config tab. Unless your using cachex.
-
heres my list of drivers
when i was cmpiling oscam in simplebuild i selected ominikey reader would that have installed the driver?
my other two are working finecardos Siemens CardOS
flex Schlumberger Multiflex/Cryptoflex
cyberflex Schlumberger Cyberflex
gpk Gemplus GPK
gemsafeV1 driver for the Gemplus GemSAFE V1 applet
miocos MioCOS 1.1
mcrd MICARDO 2.1 / EstEID 1.0 - 3.0
asepcos Athena ASEPCOS
starcos STARCOS SPK 2.3/2.4
tcos TCOS 3.0
openpgp OpenPGP card
jcop JCOP cards with BlueZ PKCS#15 applet
oberthur Oberthur AuthentIC.v2/CosmopolIC.v4
authentic Oberthur AuthentIC v3.1
iasecc IAS-ECC
belpic Belpic cards
ias IAS
incrypto34 Incard Incripto34
acos5 ACS ACOS5 card
akis TUBITAK UEKAE AKIS
entersafe entersafe
epass2003 epass2003
rutoken Rutoken driver
rutoken_ecp Rutoken ECP driver
westcos WESTCOS compatible cards
myeid MyEID cards with PKCS#15 applet
sc-hsm SmartCard-HSM
setcos Setec cards
muscle MuscleApplet
atrust-acos A-Trust ACOS cards
piv PIV-II for multiple cards
itacns Italian CNS
javacard JavaCard (without supported applet)
default Default driver for unknown cards -
For the money they spent on that 20 min clip, I bet Disney would have spent 100 times that and made it no better, Disney should be employing them to work on the next star wars film
-
Very well made, enjoyed it
-
hello lads
i using ubuntu 14.4
oscam 10077i have 3 cards redlight and bt sports(0963) which work on omnikeys and brazzers which is on a smargo, ive recently got another uk 0963 card which ive bought another omnikey reader 3121 for but for the last two nights i cannot get the right device number, its the SKYUK1 reader which is giving me trouble.
my new reader is the omnikey AG so ive put device number as 2, but my other two omni reader have device 0 and 1 and work but show as device 2 and 3 in the usb listBus 005 Device 002: ID 076b:3022 OmniKey AG
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 076b:3021 OmniKey AG CardMan 3121
Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121[reader]
label = REDLIGHT
protocol = pcsc
device = 0
caid = 0500
detect = cd
mhz = 500
ident = 0500:043800
group = 1
emmcache = 1,1,0
cccreshare = 1[reader]
label = BRAZZERS
protocol = smartreader
device = 004:002
caid = 0500
detect = cd
mhz = 534
cardmhz = 369
ident = 0500:032500
group = 2
emmcache = 1,1,0
cccreshare = 1[reader]
label = SKYUK
protocol = pcsc
device = 1
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1[reader]
label = SKYUK1
protocol = pcsc
device = 2
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
group = 4
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1 -
Hi guys
Now that I,m using Ubuntu14.4 running oscam 10077 as a server on a pc and i don't download catseye apart from for my client box, do I have to keep updating the oscam.srvid file? -
hello lads
i,m using ubuntu 14.4
i,m ready to port all my configs etc for oscam from my miracle box server but i want to get the backing up correct just incase it goes wrong, ive tried thatfellows tut using acronis but it keeps failing so ive backed it up and restored it using clonezilla which has worked well but its a bit of a pain as it clones the whole disk and i just want to back up to usb stick and not a ext hdd, what methods are other ubuntu users using to backup? ive googled a few but some seem a bit out of my capabilitys, there must be a good gui based one out there somwhere
im using the cron script to back up my oscam configs every night, so if it did go pete tong i suppose it dont take long to re -install ubuntu i guess, does anyone else just do this method or does everyone do the full backup jobby -
im getting"backup failed" when trying to back up to a usb stick sandisk 16gb, ive tried 3 sticks with the same results
ive formated them in fat32
its starts to create partition image then fails, the backups on 6gb so theres plenty of space
i must be missing somthing as it lets me back up folders -
[QUOTE
If you were using oscam as server only with no viewing you wouldn`t need the dvbapi parameter or an account for it in oscam.user..[/QUOTE]Sorry Don't want to hijack your thread pal but master g on my Ubuntu pc server would I just add myself as a user and not dvbapi? As I'll be connecting to my server as a client ?
-
hi lads
ive got this script on my ubuntu server 14.4 oscam 10077 and could do with a bit of help understanding it, ive copied it off "thatfellow"
i only have oscam installed no ccam and i dont want to auto update oscam to the latest one if that command is in here59 23 * * * root /var/script/oscam-backup.sh (does this mean it will back up oscam at 23.59 at night)
57 06 * * * root killall cccam_2.1.3 (i only have oscam installed so can i delete this entry)
57 06 * * * root killall oscam (this stops oscam)
57 06 * * * root /var/script/configupdate.sh >> /var/cccamlog/configupdate.log (can this line be deleted)
57 06 * * * root /var/script/keyupdater.sh
58 06 * * * root /usr/local/bin/oscam -b (this restarts oscam)
59 06 * * * root /usr/local/bin/cccam_2.1.3 (i only have oscam installed so can i delete this entry)
*/5 * * * * root /var/script/CCcamCheck.sh (i only have oscam installed so can i delete this entry)
*/5 * * * * root /var/script/OscamCheck.sh (this line checks to see if oscam is running)
03 07 * * 6 root /var/script/LogCleanUp.sh >> /var/cccamlog/CleanUp.log (this line deletes the log)also reading "thatfellows" tuts he mentions he restarts oscam every night and reboots his server everyday, but ive also read peeps leave thereson 24/7 what advantages/dis advantages is there to rebooting every night or leaving on 24/7
-
sorted thanks codar, i remember having this prob before, sorted now
thanks again -
i keep getting permission denied error code 3 when trying to either edit/delete/replace the crontab file
how do i log in as root on Winscp
-
Thanks Master G its working now
much apprieciated
monkips
should i use the lock cardreader config ive read in a post from 2011 or should it be ok
-
hi lads
i have installed ubuntu server 14.4 on a pc
ive 3 cards 2 of which i have in omnikey readers 3121 and they working finei used simple build to compile oscam10077 and i selected smartcard and smargo devices
i cannot get the smargo to open i suspect i have the wrong device number or protocol
when i run the command lsusb i get this i can see my ominkeys, is the 232 usb serial my smargo?
can you use smargo with omnikey?Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT 232 USB-Serial (UART) IC
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 076b:3021 OmniKey AG CardMan 3121
Bus 003 Device 002: ID 076b:3021 OmniKey AG CardMan 3121
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubi,m getting this error in the log
2016/02/25 17:51:12 1E09A40 r BRAZZERS [smargo] Cannot open device: 2
2016/02/25 17:52:12 1E09A40 r BRAZZERS [smargo] smargo init type is smargo
2016/02/25 17:52:12 1E09A40 r BRAZZERS [smargo] ERROR: Opening device 2 (errno=2 No such file or directory)my oscam configs are
[reader]
label = SKYUK
protocol = pcsc
device = 1
caid = 0963
detect = cd
mhz = 450
cardmhz = 2700
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1[reader]
label = BRAZZERS
protocol = smargo
device = 2
caid = 0500
detect = cd
mhz = 534
cardmhz = 369
ident = 0500:032500
group = 2
emmcache = 1,1,0
cccreshare = 1thanks
monki -
you need to put your configs up so the pro's (not me ) can have a look and tel you whats best, editing out all the personal info
-
Do yourself a favor pal and buy yourself a subscription it don't have to be the top package and start card sharing for the channels your missing, your always going to have freezing etc with pay servers as they overload their servers. Pay servers don't get any support on here pal
-