Display MoreZgemma H7S - For motorised Dish - is it reliable?
answer is NO
you will need a very good LNB for it to work
but you have made your mind up
ok thanks. il give it a go and report back.
Do you know if the AV HD61 is better for motorised set up?
so you have made your mind on what your going to have ?
so what was the question
Zgemma H7S - For motorised Dish - is it reliable?
and upon Googling for a few hours, ive not read anything bad about this box so ordered one.
it was between this or the AX HD61 which seems like another popular receiver. but its £50 more than the H7S.
It's simple to upgrade: put a Dual feed or Quad LNB and add a cable to the other Sat TV tuner... Cheap and great!
I don't use the motor but from what I heard - no problem....
Display MoreZgemma H7S
mine cant work 36v motor
Zgemma H9 combo
no problem
Thanks
i think i can sort out a static 28.8E feed for Tuner 1 and il use Tuner 2 for the motorised Dish. i dont record so hopefully will be fine
i think from memory it was a Dark Motor that was installed so it will be 13 / 18V . Ive ordered one anyway! arriving tomorrow with PureE2 pre installed.
just going to read up on how to best set it up now.
Hi all
So im looking to replace my Vu+ Duo (Genuine, purchased around 2011/12) which is currently being used with a motorised dish, its just getting too slow and clunky now. Ive already done the capacitor fix on it once :)
Ive done some searching and the Zgemma H7S gets recommended a lot, the prices of these receivers have come down a lot from back in the day!
I wanted to ask how reliable the Zgemma H7S with USALs? ive seen some receivers that have trouble moving a dish due to weaker internals and ive been some work arounds where you need to be on a V channel on one satellite then move to another V channel on another satellite for the dish to move as V polarisation uses more power hence helps move the motor.
Anyway the internal positioner on the Vu+ Duo is great i just want the new receiver to be just as good.
i only use the the dish for the football and it needs to support the usual cams, i do not need an android box as i have Shield TV for that
Is the Zgemma H7S the one to go for?
My dish is only single feed so you may say a triple tuner maybe a bit overkill but i guess its future proof in case of expansion.
Thanks
yes you can still block hd requests to the card with oscam services on an oscam/cccam setup you just cant apply it to the users unless done in cccam
- - - Updated - - -
once you block hd it will come up invalid in the logs
what is the difference in applying it to users or card?
if you did card only, this would apply to all users
or if you want certain user to not have access to a channel then you would not add it to the card and just add it to the user?
yes you can still block hd requests to the card with oscam services on an oscam/cccam setup you just cant apply it to the users unless done in cccam
- - - Updated - - -
once you block hd it will come up invalid in the logs
thanks, so doing it in oscam,. i will block HD for all users?
also having a look at the services of channels
i see there is 2 listed for Star Plus:
0FC9 : Star Plus UK
CB8C : Star Plus
which one is the working one and how can i tell this?
yes apply it to your users and readers as a not services ,you can paste this in thru files in oscam webif or make a services file with the sids and tick not services you may need to restart oscam to see it , here is a services file for hd should be up to date
[hd_block]
caid = 0963
provid =
srvid = 0F16,0F30,0F3E,0F4C,0F23,0F21,0F1E,0F44,0F24,0F1C,0F4E,0EDC,0EEF,0F1B,0F5C,0F5D,0F5E,5154,0F50,0F05,CD69,0F2D,0EF8,0F1D,0516,0F0E,0EE6,0F17,0F4A,0F0D,0EE8,0EEB,0F3C,0EEA,0C1D,0F1A,0EE7,0EED,0EE9,0F3D,0F47,0F25,0FA3,0EDF,0F26,0F46,0F49,0EF0,0FA1,0EF3,0FA4,0FAA,0FAB,0EFB,0EDA,0EEE,0EF2,0FC3,0FC4,0EFC,0F19,0F2C,0F42,0F43,0F28,0F3F,0F68,0F04,0F69,0F15
wanting to add this block too, can this be done on a oscam/cccam server setup?
ive added the above to oscam.services
and added a line in oscam.server: services = hd_block
is this all i need to do?
in oscam info i see now see this, when trying to view a HD channel
2015/02/22 09:10:19 EA6xxx r smartreader [***********] classD3 ins54: no cw --> Card is pairedBigup@
Are you try whitelist?
no my friend i have # out the whitelist in oscam, should i be using one?
Did not help.
So i added few channels in services and blocked them
thanks, can you tell me what channels you blocked?
seems Star Gold seems to be causing issues for me, it was "star life ok" before
I have added Delay: 50 ms delaying answers from cache
So far its working lets see if freezing come back as it does
hi, im getting the same issue, what other settings did you change apart from 50 ms delaying answers from cache ?
for stablity of star plus and others you need some codes.
hi, thanks, not sure what you mean by codes?
what are they?
hi, sorry to bump an old thread
since starting this thread i am still having this issue
Ive tried as ramzayraj has suggested but not worked,have also tried the latest oscam as of today #10313 to no avail
it seems now that Star Gold and Star Life ok stop Star Plus from working
anyone any ideas?
thanks
Plz send me the CCCAM file to me also
it wasnt the cccam file at fault, it was sly messing around but started working again on 27th june 2014
now for last 3 or 4 days the channels have reversed
star plus take precedence now, so if one receiver is watching star plus, star life ok on the other receiver wont work.
doh! whats going on
ok, i followed this: http://linuxsat-support.com/showthread.php?t=62428&p=210289&viewfull=1#post210289
latest oscam install, and cw cycle check enabled
i know see (cwc NDS OK) after each line on the oscam webif, but star plus seems to go blank still when star life ok is selected, is there anything i need to do/add?
This is the same as the RTE Issue way back, you will need oscam with CW Cycle Check..
This is by no means a perfect solution but it is the best solution available..
thanks, ive seen this mentioned before, can oscam #7750 do this? or will i need newer oscam installing?
can anyone try replicate the above channel conflict? or know how to fix it? i need bot channels available again
2 boxes on one local server, one channel on Star Plus SD, then change channel on the other box on Star Life OK and see if star plus dies?
ok found a pattern
if one client is watching star plus sd and another client on same server switches over to Star Life OK, it is this what is killing star plus!!!
how the hell is this happening!
ok, gone off again 23:10 on local, but 3rd party share its working!
im totally lost!
21:59 GMT, its back on, by it self and ive not done anything!
hi guys, im glad it not only me!
its happening now again as of 20:50 GMT!
il upload the cccam bin file now for you, its CCcam.x86_64 for Linux server
anyone know why this happening?
does star plus need oscam to work?
