With last Oscam Emu version (776 - revision 11438) SIS (4.8e) stop auto update Key´s...
Is it happening to anyone else?
Should i change some settings?
Thanks!!
Posts by fmoreira
-
-
Should last OscamEmu version found MTN Key´s? Like in AFN or Discovery?
Thanks!!
-
-
Hi,
I have a dreambox 900uhd and i use stream relay for Power Vu channel´s. I know i don´t need it but i use it to avoid reboot when i change for a different encrypt channel.
Almost my Stream Relay channel´s work without problem´s but in some Sis i have a issue:
- The Oscam find the key´s without problem´s but i still with a black screen... I already verify and the stream relay channel´s are correctly created....
Any tip?
Thanks!!
-
you have old DreamBoxEdit update to new verision
Master medousa89 your wisdom is infinite ....
Your patience with the ignorant even more!!
Thanks for your help... Thanks to lordgothic too....
With last DreamboxEdit i was able to edit FEC and StreamId and all channel´s are ok!!
-
There is my list with Fec fix on DreamBox Edit
But StreamID = 0
-
When i edit and send to box i get
- FEC ok (5/6)
- but Idstream = 0 again
-
-
so first via telnet send
init 4
and move the new lamedb
next via telnet send
init 3
With lambd from #46?
I get the same: StreamId ok, but FEC-3/4
-
It's ok now ;) problem with transponders data
It´s closer... but not there yet...
On your fix StreamId is correct!!! But Fec is 3/4 and not 5/6...
If i fix Fec with DreamboxEdit i get StreamId=0 again...
Can you, please, fix FEC on lambd!!
-
send me your lamedb to fix it
Thank´s !!!
-
try this satllites.xml by satdreamgr
path /etc/tuxbox/ or /etc/enigma2
Thanks...
On satellite.xml i found:
<transponder frequency="12188000" symbol_rate="30000000" polarization="0" fec_inner="4" system="1" modulation="2" is_id="20" t2mi_plp_id="0"/>
<transponder frequency="12188000" symbol_rate="30000000" polarization="0" fec_inner="4" system="1" modulation="2" is_id="10" t2mi_plp_id="0"/>
But on box streamId still on 0
Is it because it's a fake channel?
Independent from satellite.xml?
-
If i check that frequency i have a good signal about 85%... But it is 12188 H 30000 5/6 Id Stream 10 or 20...
When i use the channel list for T2-Mi the fake channel 12188 H have defined Fec 3/4... and IdStream: 0... so i have no signal and no stream relay channel´s working...
-
stream relay channels or fake???
Fake...
12188 H Mis10 and
12188 H Mis 20
They have wrong Fec an StreamId and thats the reason Stream Relay channel´s associated to them do not work!
-
Can you please explain me how i can change the streamId from 12188 H Mis10 and Mis 20? How do these fake channel´s are created?the first satdream team make this method for t2mi with " fake channels " and stream relay channels , the " fake channels " have two use 1) for data and 2) for release the tuner from stream relay channels when stop to use
And it is possible edit that channel´s?
I need change the streamId from 12188 H Mis10 and Mis 20
-
Display MoreDisplay More
Hello... first thank´s for your share...
I have a dreambox 900 Uhd and i am trying to follow your steps... without success so far...
I have Albertis (30W) working....but i have no lucky with 4.8....
Everytime i edit lambedb i get a error...
The same happen´s with Albertis channel´s and the only solution i found was use a channel list with that channel´s from other´s (and stop trying merge with mine)
So, please, it is possible to share your TE Mi Astra channel list? I know you already share your lamebd but i get the same error if i use it inserted on my own channel list!!
Thanks!!
so edit the astra.conf with both config like this
Thanks medousa89!!!
With this astra.conf I can see the Abertis .... and channel´s from 12341H but i have the same problem on 12188H
Can you please explain me how i can change the streamId from 12188 H Mis10 and Mis 20? How do these fake channel´s are created?
Sorry for insist but it seems to me that the cause for not seeing these channels is in the Fec incorrectly defined (already fix it) and the stream Id incorrectly too
-
I think i find the problem...
The Fec from 12188 is defined for 3/4 and should be 5/6... With DreamboxEdit i correct it!!
But still with a problem: When i check on box StreamId for 12188 is 0 ... should be 10 or 20... And i can not change it from Dreambox Edit...
Any ideia how can I fix it?
-
Thanks for you help and patient...
I don´t understand...
I try with 3 different channel lists (post#3 included) and i have always the same problem... all 3 have different lambd files....
-
you have problem with lamedb ,it's not correct
Thanks...
Can you, if possible, share your channel list for this channels?
-
the 3 channels("12188 MIS 10","12188 MIS 20","12341 MIS 30") are fake channels and use as "index" for streamrelay channels
Yes...
But why when i choose 12341 i have signal and when i choose 12188 i haven´t?
This means a problem on channel list?
