Posts by fmoreira

  • T2-MI test on Astra4A 4,8°E

    I tested with a different channel list (a complete channel list for dreambox edit provide by lordgothic) and i have very similiar results:


    - Channel´s from 12341H are working ok

    - Channel´s from 12188H (10 and 20) still a black screen but sometimes after i restart my Oscam i get the channel for 2 or 3 seconds.... after that the channel freeze...


    I am using OpenAtv 6.0 with Oscam Emu 11426. Could be something on Oscam configuration?

  • T2-MI test on Astra4A 4,8°E


    I follow your steps:


    1. astra_sm install

    2. In etc/enigma2/ insert:

    #SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.zeonbud.tv" ORDER BY bouquet

    3. copy userbouquet.zeonbud to etc/enigma2/


    And no sucess...


    After i overwrite my lamedb file with your´s from post#3 and:

    - Channel´s from 12341H are working ok

    - Channel´s from 12188H (10 and 20) still a black screen


    Any sugestion?


    Thanks!!!

  • T2-MI test on Astra4A 4,8°E

    Thanks for your answer.


    I will try as soon as possible... And left feedback after

  • T2-MI test on Astra4A 4,8°E

    Hello... first thank´s for your share...


    I have a dreambox 900 Uhd and i am trying to follow your steps... without success so far...


    I have Albertis (30W) working....but i have no lucky with 4.8....


    Everytime i edit lambedb i get a error...


    The same happen´s with Albertis channel´s and the only solution i found was use a channel list with that channel´s from other´s (and stop trying merge with mine)


    So, please, it is possible to share your TE Mi Astra channel list? I know you already share your lamebd but i get the same error if i use it inserted on my own channel list!!


    Thanks!!

  • Oscam-emu Autoroll via emm ?

    Quote from lavic2006

    Can you post your configuration,i have Dm900 too,thx?



    Try add this:



    Conf


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 0

    delayer = 60

    ecminfo_type = 1

    user = dvbapiau

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 1

    boxtype = dreambox




    Server


    [reader]

    label = emulator

    protocol = emu

    device = emulator

    caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010

    detect = cd

    ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000


    [reader]

    label = constant.cw

    protocol = constcw

    device = /usr/keys/constant.cw

    services = !afn

    caid = 2600

    group = 1


    [reader]

    label = AFN

    protocol = emu

    device = Emulator

    services = afn

    cacheex = 1

    cacheex_maxhop = 1

    cacheex_allow_request = 1

    caid = 0E00

    detect = cd

    group = 1

    emmcache = 1,5,31,1

    emu_auproviders = 0E00:000000

    auprovid = 000E00




    User


    [account]

    user=dvbapiau

    monlevel= 4

    au= 1

    group = 1,2,3,4,5,6,7,8,9,10

  • Multistream Hispasat Channels (Dreambox 900 Uhd)

    I believe it is a signal problem...

    I have a 60cm dish pointed for hispasat and in the "standard channel´s" i have about 90% signal... and nothing from multistream...

    I also have a motorized 1,20m dish... if i point it for hispasat i have less signal from "standard channel´s" - about 85% but i receive the multistream channel´s from both frequencies...


    In 11496h signal changes from 0% to 85%

  • Multistream Hispasat Channels (Dreambox 900 Uhd)

    Thanks for the information...


    I still can't set that hispasat Multistream....


    Dreambox900 uhd is a very good box and works great on all Multistream channels from other satellite's...

  • Multistream Hispasat Channels (Dreambox 900 Uhd)

    Thanks... I already have take a look at that site and there is no stream id information on hispasat...

  • Multistream Hispasat Channels (Dreambox 900 Uhd)

    Hello!!


    I am trying to set multistream channels from hispasat (A7, A8, A9 Hd) in my Dreambox 900 Uhd,


    But I can not do it...


    Unlike the multistream of other satellites in hispasat there is no reference to "Input Stream Id" value and I think that is the problem ...


    Has anyone with this box managed to set these channels? What did insert in "Input Stream Id"?


    Thank you!!

  • [Question] NSS7 20W

    Hello,


    I have recently tried to tune this satellite and I came across this situation:


    Signal:

    morning - 75%,

    lunchtime - 90%,

    Somewhere during the afternoon (I still did know exactly when) the signal disappears and reappears around 23h with 17% .... that at 24h is already 60% ...


    Another question is about active transponders ... the information made available on reference sites is not coherent:

    I only have channels on the frequency 12513 H 8333 DVB-S2 / QPSK but according to the King of sat the frequency 12697 H 6665 DVB-S2 QPSK should also be active ...


    Anyone tuning in to this satellite could give some feedback?


    I'm in Porto with a 1.20m dish.


    Thank you!!

  • Oscam-emu Autoroll via emm ?

    Quote from Linuxxxx

    AU works on Discovery and SIS and keys updated but no sound and image. just AFN is ok. how fix this problem? any changes need to oscam conf files?


    Ok... my Discovery problem was time.... i needed to give more time to oscam find the keys...


    Linuxxxx in my Dm900UHD with last oscamEmu version: Afn, Sis and Discovery auto update works with image and sound

  • Oscam-emu Autoroll via emm ?

    Can you please validate this:


    - With a softcam.key like yours on this post,

    - Oscam.conf, Oscam.server and Oscam.user adjusted to au AFN


    Should i get au on SIS channel´s?


    Thanks!!




    Edit:


    I tested what i ask before and yes SIS Update works fine with Oscam.conf, Oscam.server and Oscam.user adjusted to au AFN!!!


    But Au on Discovery channel´s did not work...


    I get this log:



    • 2018/06/29 23:38:35 128450CD c (ecm) dvbapiau (0E00@000000/0000/03E8/40:27BC9C37196216E18149BE90B33692DB): rejected group (0 ms) - Discovery World (no matching reader)
    • 2018/06/29 23:38:36 128450CD c (ecm) dvbapiau (0E00@000000/0000/03E8/40:4E209128DAD78B0CE1171F5652B6AB94): rejected group (1 ms) - Discovery World (no matching reader)
    • 2018/06/29 23:38:36 128450CD c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 0 disabled ecmpids!
    • 2018/06/29 23:38:36 128450CD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1773 ANY CHID PMTPID 0442 VPID 03E8


    My questions are:


    - Should Au work on Discovery?

    - If yes what i am doing wrong?


    Thanks!!

  • Power Vu for AFN (9ºE)

    Thanks for your help...


    AFN is working again!




    About stream relay i noticed a thing:


    Without stream relay when i came from AFN to another encrypted channel all works ok without reboot box...

    If i came from different Power Vu channel (Like Discovery) i need to reboot it like before....