Posts by fmoreira

Finally SIS Au is working 100%...

It was´t Oscam files configuration but the bin i was using...

Attach what I'm using now and it works fine on a Dreambox 900 UHD

Quote from nautilus7

I looked again in your softcam.key... It is a real mess... When you add instructions on your softcam.key oh how to add keys, you have to add them as comments.

COMMENT LINES START WITH CHARACTERS LIKE "=" or "-" or ";" etc. The lines below (taken from your sofcam.key) are NOT comments!!!

Code

P sid Key
ou
P onid/sid Key
P xxxxXXXX Key

srvid: é o Sid convertido em hexadecimal

Se o srvid começar por 0 esse 0 deve ser colocado no fim, exemplo:
SID:510-dec --> 01FE-hex ==> SRVID:1FE0


Easiest way to find the correct key line:
Switch to the channel, oscam-emu/Osemu will log:
[Emu] Key not found: P 1234 00
-> add key as
P 1234 00 xxxxxxxxxxxxxx

Outra forma é ver o Sid que aparece nos 2boomEcmInfo. Deve ser usado como aparece lá

Display More

For example the line P onid/sid Key is considered as an actual key!!!

Also powervu ecm keys without a group are not allowed. These keys are invalid:

Code

P 1FE0 00 B07EC58F412BD7  The Fight Network
P 1FE0 01 A52E79D341F87F  The Fight Network

All this crap inside your sofcam.key file can cause weird issues like those you mention. Clean up your softcam.key file and try again!

Display More

Thanks... i will clear and correct my softcam.key...

In past week i test Sis Au with my softcam and with softcams (and the others oscam files) from users who had SIS AU working ok,

And the result was the same: on a day that works, works with any softcam, on a day when it does not work, does not work with any..

I also tested with softcam only with the keys related to SIS .... and the results were the same.

Thanks again for your help!!

I will try give you a example :

Receiver is on Coral tv1 and I wait for Au...

I will keep receiving the Key not found message on live log forever

In moment I change for another channel (not a sis channel) I will get Au keys on softcam.key for sis

All the written keys are the same less last one

The last one is for Ladbrokes 1- PVU3 and this channel is the only one working.

If I change all other keys for the ladbrokes key all channel's start working...

This happens all times ...

Hope this help explain my situation. If you check softcam.key I left you can see last key is different from the others

Thanks again

Edit:

Today AU on SIS is working ok... i wait for 7 minutes and the channel clear. All Sis channel´s are working ok.... all key written on Softcam.key are the same key...

This is another strange thing: since last saturday one day Au not worked (like i explain above) the next day worked ok... and kept this sequence all week long...

Quote from nautilus7

I really don't understand what is your point...

I asked you to give me the softcam.key you use and have problems. You sent me another one that doesn't give you problems... Now you ask some questions that do not make any sense.

Give me the EXACT softcam.key you use and have problems. Tell me the EXACT channel you tune into to get AU. Then I can tell you what is the problem, if there is one.

I also have problems with this softcam.key... This one is from my testes yesterday afternoon... Sis did not work... All keys from AU are wrong keys except last one (Ladbrokes 1- PVU3)...

I tried again at night with same results... AU keys are all wrong less last one (Ladbrokes 1- PVU3)... And only had been written after I change for a no sis channel

So, the softcam.key I gave you is not working

I update on Coral Tv1

Thanks for your help and sorry for my limitations on oscam and English. They do not help a better communication

Quote from nautilus7

fmoreira the softcam.key you attached is fine!

There is no key P 20017 00 like you mention in your previous post, so there is no way to come into problems. Probably the problems you get are coming from another softcam.key...

The softcam. key is from one of my tests... Probably I quote the P 20017 form a different one... But the problem is there :

P 20057 00 284A9706653530 ; added by OSEmu Fri Nov 16 22:18:31 2018 UA: 004D61BC

P 20042 01 4A727569428A67 ; added by OSEmu Fri Nov 16 22:18:31 2018 UA: 004D61BC

The last line is different from all others and is the only that was correct...

Why it only write Au keys after I change from a different channel?

And why all the keys are the same... And wrong keys, except one, and that is the correct for the all package?

ThIS afternoon I will try to get a recent softcam. Key... But today probably AU is working ok (I use always the same channel)

Thanks

Quote from nautilus7

fmoreira send me your softcam.key file to have a look. It should be a way to simplify it, so it works better.

Thanks nautilus7

That can explain why in some days Sis Au works?!

My softcam.Key:

https://www.sendspace.com/file/ha50aa

This is a really mess.... I will try explain as far as my poor english allow me...

In Rev774 AU gives me:

P 5E0017 00 KEY ; added by OSEmu Fri Nov 16 16:43:11 2018 UA: 00595C6A

And everything works ok....

In Rev 776 i get

P 20017 00 KEY ; added by OSEmu Fri Nov 16 19:52:11 2018 UA: 004042D8

And it not works...

But i think the different Key configuration is not the problem....

With Rev776 when i leave it on a SIS channel to get AU i I get the "Key not found" message in the Live log indefinitely (no matter i wait 10 or 40 minutes). When i change for another non SIS channel my Softcam.key is filled by the AU keys.... They are all the same Key with the exception of one. This is the only correct and that channel is the only working (everytime Ladbrokes 1- PVU3) .... if i manually change all the keys obtained in the AU to the different one all the channels are ok....

I do not understand....

I believe my problem is not the AU but the way OScam saves the Key from AU on SoftamKey

With Rev774 i have on Softcam.Key:

P 005E0017 00 00000000000000000

P 005E0017 01 00000000000000000

The AU works and i get:

P 5E0017 00 KEY ; added by OSEmu Fri Nov 16 16:43:11 2018 UA: 00595C6A

And everything works ok....

With Rev776 i have on Softcam.Key:

P 005E0017 00 00000000000000000

P 005E0017 01 00000000000000000

The AU works ok but the final result is:

P 20017 00 KEY ; added by OSEmu Fri Nov 16 19:52:11 2018 UA: 004042D8

And the channel still dark...

Any idea why Rev776 do not save the Key from AU with the same config from Rev774?

Just to show the strange of this situation:

Sunday works ok, monday did not work, tuesday worked well and today is not working again... with same settings!!

In all these days worked with Rev774

Quote from Inspiral

Tried SIS again today with latest Informed softcam keys, 1st using Oscam-emu 11438 & nothing

& then with Ncam 6.9 & again nothing?

Ive got AFN & Discovery PowerVU on both 1w & 4.8e working...

help me fix this plz

Display More

I do not understand what is happening... seems my box AU SIS every other day...

Today i tested with all settings it failed yesterday... and all worked...

I would like to have some tips that would help you solve the problem ... but as I said I do not understand what is happening ...

Probably tomorrow my Box will not update SIS...

And today with Rev776 and the same settings from yesterday SIS AU... is working Just ok... :/

Quote from Serjoga

Ye I also think problem is with DM boxes

I change my settings for technodvl2 settings...

And with rev776 no Au...

Let´s see if anyone with Dreambox have Au working and what future OScam version do about it....

I think it is a problem related with the changes on last OscamEmu version and Dreambox:

- Today with same settings i get AU on AFN but not on SIS,

- With rev774 and exactly the same settings i get AU on SIS and AFN... The only thing different is the OScamEmu version...

I will try with rev776 with your settings...

Ok... I miss the cant... Sorry...

Seems some people are having problems with Sis AU...

In my case, my settings worked ok yesterday... But not today... It is strange but I will take a careful look at my settings.

Thanks for your answers...

Quote from technodvl2

all work

the oly oscam i cant get working is the levi45 he put yesterday

it just say new hash 19

40abdc42dbaf.jpg

Display More

That make sense... a change on SIS hashmode...

Where can i found levi45 OScam?

Thanks!!

Quote from Serjoga

On DM920 this config not working...Any one have config for SIS package and AU update? One time keys come very fast, but I lost this config...

Quote from Inspiral

Been trying fix SIS for days with diff softCam.keys

AU ems keys & still nothing

That’s using latest versions of both Ncam & oscam_emu

This is very strange....

Saturday Au was not working on SIS and i started this topic. Yesterday it worked ok (2/3 minutes to get the Key´s) and today do not work again....

Exactly with the same settings...

I get this:

2018/11/12 10:58:26 28BB4DF0 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!

2018/11/12 10:58:26 28BB4DF0 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17E8 ANY CHID PMTPID 1400 VPID 038E

2018/11/12 10:58:26 00000000 (emu) Key not found: P 0078 01

2018/11/12 10:58:26 465276BD r (emu) ECM failed: ECM not supported

2018/11/12 10:58:27 28BB4DF0 c (ecm) dvbapiau (0E00@000000/0000/0078/40:E8D6E59B60C998095DF8C813993C7B82): rejected group (0 ms) - Alphameric Studio and SIS+ (no matching reader)

2018/11/12 10:58:27 00000000 (emu) Key not found: P 0078 01

2018/11/12 10:58:27 28BB4DF0 c (ecm) dvbapiau (0E00@000000/0000/0078/40:7A083C6E198CBEBFBB6ACF7E216E6398): rejected group (0 ms) - Alphameric Studio and SIS+ (no matching reader)

2018/11/12 10:58:27 28BB4DF0 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 0 disabled ecmpids!

2018/11/12 10:58:27 28BB4DF0 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 17E8 ANY CHID PMTPID 1400 VPID 038E

2018/11/12 10:58:28 00000000 (emu) Key not found: P 0078 01

2018/11/12 10:58:28 28BB4DF0 c (ecm) dvbapiau (0E00@000000/0000/0078/40:FFDE1F7073210DB9E640BE402FF51D41): rejected group (1 ms) - Alphameric Studio and SIS+ (no matching reader)

2018/11/12 10:58:28 00000000 (emu) Key not found: P 0078 01

I will try with rev774 and check...

Edit:

Tested with rv774 with same settings (less disablecrccws_only_for = 0E00:000000 on readers) and i get keys very fast...

Quote from nautilus7

I am waiting for a log, full config files and softcam.key then...

Thanks to @theGarsun and to you for the help!!

Auto Update are now working ok on AFN and SIS!

I Kept last oscamEmu version and all my settings. The only change I made was to delete from the softcam.key the November keys coming from auto update.... was probably a old key interference problem!!

Just a last question:

The EMM i have for SIS on Softcam.Key are not the same you provide above... should i change it?

Thanks again !

Quote from theGarsun

1.

You are missing

disablecrccws_only_for = 0E00:000000


from the first reader (which is the one that's dealing with SIS).

2.

Your EMMs are in the correct format.

Display More

Sorry, i made a copy/past from a hold backup ...

In my present oscam.server both readers have the disablecrccws_only_for = 0E00:000000 command...

Where can i find MTN EMM´s?

Quote from theGarsun

SIS Live Auto-Update in OScam 11438 emu r776 is OK at my end.

OScam has successfully used the attached Auto-Roll EMM/UA combos, in the last two days.

Also, (though this may not affect Auto-Roll) remember to put the following line in your "oscam.server" file, in all emu readers that you have configured for PVu - it has been suggested that it should appear just ahead of the group entries:

disablecrccws_only_for = 0E00:000000

Leaving the above line/directive out, appears to result in Audio working correctly, but NO Video on SIS Live & the Discoverys @4.8E

Display More

Thanks for your answer!!

Can you, please, confirm my my readers are ok (i know disablecrccws is not placed where you said):

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000 000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000 ;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:00000 0



[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1

emu_auproviders = 0E00:000000
auprovid = 000E00
disablecrccws_only_for = 0E00:000000

The Emm configuration is:

P 005E xxxxxxxx xxxxxxxxxxxxxxxx ?

Thanks!!