Thanks for your answer!!
I have signal from many channels in that satelite and also from 11544V.
I already try with your enigma2 ciefpsettings and have no picture. That's why i ask if i need update astra.conf.
I already use astra.conf file for Abertis and some time ago for Zeobud. Should that old file works on Rtrs without a update?
There are some channels on 14w to broadcast in T2Mi.
In the ciefpsettings these channels already appear in Streamrelay. However, I cannot see them.
I'm probably missing some change in astra.conf but I can't find any information about it...
Any clues?
Thanks!
I will take a carefull look to the provided information!!
Thanks for your help!
Telnet log:
Downloading http://feeds2.mynonpublic.com/6.4/dm900/3rdparty/Packages.gz.
Updated source 'openatv-3rdparty'.
Downloading http://feeds2.mynonpublic.com/6.4/dm900/all/Packages.gz.
Updated source 'openatv-all'.
Downloading http://updates.mynonpublic.com…hf-neon-vfpv4/Packages.gz.
Updated source 'cortexa15hf-neon-vfpv4-3rdparty-secret-feed'.
Downloading http://feeds2.mynonpublic.com/…hf-neon-vfpv4/Packages.gz.
Updated source 'openatv-cortexa15hf-neon-vfpv4'.
Downloading http://feeds2.mynonpublic.com/6.4/dm900/dm900/Packages.gz.
Updated source 'openatv-dm900'.
Downloading http://feeds2.mynonpublic.com/…m900_3rdparty/Packages.gz.
Updated source 'openatv-dm900_3rdparty'.
Downloading https://raw.githubusercontent.…d/master/feed/Packages.gz.
Updated source 'oe-alliance-settings-feed'.
Installing dvbsnoop (1.4.55+git37+5b236b1) on root.
Downloading http://feeds2.mynonpublic.com/…ortexa15hf-neon-vfpv4.ipk.
Configuring dvbsnoop.
Anyway for the ts you must record on the decoder using the option to record the frequency
Thanks for your time and help!
Can you please explain how i record the frequency?
I can find only one record option in my Dreambox...
Some time ago I found a post about how to disable Pids auto update on Dreambox 900Uhd.
I don't remember the proceeding nor can I find the post in question.
Can anyone show me the way?
Thanks!!
A long time ago I was trying to be autonomous on this subject and I dedicated myself to reading some things. The many doubts I had and not having found a space to clarify them made me give up.
I just found this space with good information and I will try again.
Sorry for the very basic questions but I don't have a knowledge base that allows me to be on another level.
From what I understand, and it could be all wrong:
1. To find Biss I need the CW. To find them i use this program: How To Find A Biss Keys using "CWBruteList"
2. I can also use crypt8: < Post C-8 & .ts file Here >
In this case I have the C8 keys, from where I can extract the Cw. But how? What soft do I use?
3. Once I have the Cw I can get to the Biss through the CW Finder from C8_data & C8 - checker: CW Finder from C8_data & C8 - checker checker /. Is there another soft to convert Cw to Biss?
Is this the method?
Then I have another problem: recording the ts.file. I tried in 2 ways:
1. Through Vlc on PC (by streaming from the box)
2. Recording directly to the box disk and then transfer to PC.
I always have the same problem. No Cw Brute force i get: Encrypted packets not found.
In Crypt8:
Using all PIDs
Using payload size: 184
Using file limit: 4096 MByte
File length: 550 MByte
UsingFileLen: 577114880 bytes
Reading file...
Searching ...
Time for searching Crypt8 = 0 sec.
And no keys... What am I doing wrong in the recording?
I use a Dreambox900 UHD. Sorry for the long post and my limited English. I hope someone has the time and patience to help me get there!!
I have a 15 year old diseqc motor (bigsat with a dm900 uhd) that started with a strange behavior: whenever it rains the engine runs by itself to the east limit.
When I rotate it again to a new pisition, sometimes it stays on the satellite for a while until it returns back to the limit, other times it doesn't even leave that limit.
In a dry day it works without problems...
I have already checked the F connectors and they are well insulated from water and moisture. I've already changed all the cables and the LNB... and the behavior in the rain remains the same...
Could this be a sign of the end of the motor's life?
NBC/CNBC/MSNBC Feeds
12521H SR320000 7/8 DVB-S
Is it a continuous broadcast?
I have good satellite reception and I don't pick up anything on that frequency...
Does the NBC feed still exist at 15w?
What is the frequency?
I've been without access to this satellite for some time and I can't capture the feed, I don't know if it's a problem with the dish or if there was any change...
I had this package well configured when AU was working.
In the meantime I moved house and had my motorized dish dismantled for almost 2 years. I am now using it again but with the lack of practice I forgot many things.
I will review your tips and my settings.
Thanks!!
P 0068 00: 1A A7 8C 62 EE 2F 2D
Key 00: 1A A7 8C 62 EE 2F 2D
Key 01: F9 59 9B 67 7E 23 29
Like this:
P 0068 00: 1A A7 8C 62 EE 2F 2D
P 0068 01: F9 59 9B 67 7E 23 29
?
I'm a little rusty. What is the correct key format:
P sid Key?
Or do I need some more data?
For example for Afn Sport it would be:
P 0068 xxxxxxxxx
Using a multimeter check for resistance in both of the inner and outer cable part's. Compare these to the other cable as well.
45 meters is a long run indeed.....possibly too long tbh.
The cable dose not like to be streached or bent in sharp angles.
BTW are you testing with the same receiver?
Thanks for you answer!
Tested with same receiver. All components were the same except the receiver-motor cable.
45m is really a lot but it works well with the test cable!
I don't have a multimeter... I'll try to get one.
I'm re-assembling my motorised dish. I had already prepare the cable from the receiver to the dish location some time ago. There are about 45 m of cable
Now i am facing a problem:
If ionly have the cable that comes from the receiver connected to the motor, it works fine. As soon as I connect the cable that goes to the Lnb, the motor stops rotating (it has an initial impulse and stops).
I tested with another cable exactly the same (length and brand) and the motor works normally (even with the Lnb on). The first thing that occurred to me was that I damaged the cable during the process of passing it through the pipes in the wall. But this theory leaves me a bit on the back foot:
After having pointed the dish at a satellite with the test cable, I have exactly the same signal with the 2 cables.
If the cable was damaged to rotate the antenna, I expected to have some signal loss too?! that I don't have...
If it's a damaged cable problem, how come it only manifests when I plug in the Lnb cable?!
I tested all connections and F plugs... the problem is not there.
Changing the cable will be complicated due to the gutters and pipes and it's possible that I'm missing something basic.
Any tips?
Thanks and sory for my english!
Today is working ok again!!
For a few days now, I have had difficulties in receiving the NasaTv 4k channel (Hotird 10727 H 3000)
When I switch to the channel, I have an image for a few seconds, then it stops and I only get sound.
I know a new Pid (377) was recently added but I don't see the link to the problem.
Any tips?
Unfortunately it still doesn't work 100% on OpenAtv 7.0. The skin configuration menu is missing...
Since the Hdglass website is offline I don't know how to contact the developer.
If someone manages to get to him, I leave the error that I get in an OpenAtv 7.0
Does anyone know what happened to this skin's developer forum? https://forum.hdglass16.eu
Since 2 weeks I can't access.
I have a bug with this image in openatv 7.0 and I was exchanging information with the developer on the forum
not work on unstable DMM Image only on ORIGINAL DMM sorry
that has been written a thousand times. "Gutemine" only does plugin for ORIGINAL DMM Images ;)
Can I use the original DMM images in flash for BA installation? Do they work like unstable?
These original DMM images are the stable ones found in:
https://www.dreamboxupdate.com…le/images/dm900/index.php
I thought for BA I had to have in flash a unstable image
