Posts by fmoreira

Quote from seagen

I see that you have a OpenATV image but you have a Dreambox.

Have you tested with and DreamOS image and see if that makes any diffrent?

I tested with newenigma... same result!

Quote from seagen

Yes VPN can most certain be the problem but there should be an setting in the OpenWeb where you can assign if VPN connections is allowed

webif-vpn.jpg

You're right: that option exists and I need it active to be able to connect to the box

Thanks for your time seagen...

After some reserach i think Vpn could be the cause of the problem... Although I still don't understand how it works with the stream of HD and 4k video files...

Quote from seagen

Depending on what Dreambox you are using you have the option to transcode the streams.

This is set in the settings of your web interface.

Could that be:

"Descramble http streams"

?

Yes Mbps, of course... And I only stream for me... So only one user.

I stream 4k video files from my Dreambox hard drive to outside home just to test the result!! And no freezes...

I will check my transcode settings!!

Quote from seagen

Streaming inside your home network can not be compare to the outside.

But 100Gbs upload speed would be more then enough.

Just rember that your home router must also support it, And you also need a cable network

Also 100Gbs is in teori if there is only one user

Test your real spped here:

https://www.speedtest.net/

Whay Dreambox do you use??

Display More

SpeedTest confirms: 491/102 gbs...

I understand your point about internet speed but if the problem was related to that i won´t be able to stream 4k videos files without freeze problems...

I use a Dreambox 900Uhd with OpenAtv 6.4... Maybe a image related problem? Some Dreambox Settings?

Thanks for the tip. I will explore that option...

My internet is 500gb download/100gbs upload... and I still don't understand how I can stream 4k video files without a single freeze and the Dreambox HD stream is always stopping...

I have a Dreambox 4k with openatv 6.4.

I set it up to stream outside my house network. If they are SD channels it works fine but HD channels are constantly stopping. Apparently it could be a bandwidth issue but if I stream a 4k movie from the hard drive I have in the box it works flawlessly... so it doesn't seem to me to be related to bandwidth...

Are there any settings I can change in the Dreambox?

Any idea what's causing the stops?

Thanks!!

Quote from Azzurra

Quote from fmoreira

If you have osca-emu working ok but only a black screen without image, check if you have on the reader something like:

disablecrccws_only_for = 0E00:000000

always on a black screen

Did you check on oscam.server if you have a reader for powervu with: disablecrccws_only_for = 0E00:000000

When your are on a power Vu channel what you get on oscam log?

If you have osca-emu working ok but only a black screen without image, check if you have on the reader something like:

disablecrccws_only_for = 0E00:000000

Thank you all for your help. It is working!

Apparently it only works (Dm900Uhd with Openatv 6.4) with a specific format in the keys. What is shared by jenseneverest!!

Thanks!!

I will try it asap!

Quote from scouse645

Thanks.... but when i follow the link i get stuck in a login page...

Can you, please, try with another upload page or maybe the easiest way by private message?

Thanks for your help!!

Quote from scouse645

yes it does, watching today.

I was 2 years without access to that satellite and I had this package working ok... Now it doesn't work. I think I'm a little rusty...

This is what I have in SOftcam.key:

P 2968DFA9 GROUP 0056 ; SIS 12419 H, 4.8E

P 5E623782 GROUP 0056 ; SIS 11727 H, 4.8E

P 0056FFFF 00 1BCD02B6143BF4 ;ecm key

P 0056FFFF 01 683863FE0DAD11 ;ecm key

P 0056 002B8EF7 B7F1C5CBCD1867 ;EMM Key

P 0056 00595C6A 9A724EA38306C3 ;EMM Key

P 0056 004042D8 D70A0BD206B274 ;EMM Key

P 0056 004D61BC 850F8ECDA2D356 ;EMM Key

P 0056 004D6864 7EA4FAA3A09FE3 ;EMM Key

P 0056 00530ABD ECF4B073C7F8A4 ;EMM Key

Do I need anything else for autoupdate to work?

Does Sis on 4.8e still working on PowerVu with OscamEmu?

Thanks!!

All working!!

Thanks for your help!!

I am using the laste settings i found from you, from 09/09 (motor) and they are different from your picture. ( i deleted some channels from list but did not change anything on 4.8e data)

There is a newer version?

Ps: I already realized the problem: they were in • 4.8 E - Ukraina FTA • TRK Xtra TV an not in ## ( T2MI & MULTISTREAM ) ##

I updated astra.conf and channels from 14w are working ok!! Thanks!!!

But i still have no picture from channels on 4.8e.

I have signal on 12073 H 30000. But your settings have 12073 H 27500... i Have no signal from that frequency. It´s that the problem?

Thanks for your answer!!

I have signal from many channels in that satelite and also from 11544V.

I already try with your enigma2 ciefpsettings and have no picture. That's why i ask if i need update astra.conf.

I already use astra.conf file for Abertis and some time ago for Zeobud. Should that old file works on Rtrs without a update?

There are some channels on 14w to broadcast in T2Mi.

In the ciefpsettings these channels already appear in Streamrelay. However, I cannot see them.

I'm probably missing some change in astra.conf but I can't find any information about it...

Any clues?