Posts by fmoreira
-
-
Still not working on my Dm900 with OpenAtv 7.3....
The last OpenAtv image without problems is version 6.4
-
Strange one any one else screen black
At this momento:
12245V are ok
12073H Black screen
-
I have Afn (9e) and Sis (4,8e) working without problems for a long time on my Dreambox 900 with OpeanAtv 6.4 image.
Today, without having made any changes, I have a problem:
- I start the box in an Afn channel and it works fine. I switch to a Sis channel and this is working too. If I go back to the AFN channel I have a black screen and on Oscam I have:
2023/08/12 15:23:29 34889499 c (ecm) dvbapiau (0E00@000000/0000/006B/99:98DF27DDF3301152F70160E91D03585F): cache3 (6 ms) by AFN (C/1/2/2) - AFN
2023/08/12 15:23:37 34889499 c (ecm) dvbapiau (0E00@000000/0000/006B/99:69509DF33AFF5E1DF26979F4B9C45ECC): cache3 (8ms) by AFN (C/1/2/2) - AFN
2023/08/12 15:23:37 34889499 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2023/08/12 15:23:37 34889499 c (ecm) dvbapiau (0E00@000000/0000/006B/99:A05F969FE45A348C88D3AA26EAF73D4A): cache3 (1ms) by AFN (C/1/2/2) - AFN
2023/08/12 15:23:47 34889499 c (dvbapi) ERROR: ioctl(CA_SET_DESCR_MODE): Invalid argument
2023/08/12 15:23:47 34889499 c (ecm) dvbapiau (0E00@000000/0000/006B/99:4EE05F379F4120BFD2F3A35FBFC205C3): cache3 (8ms) by AFN (C/1/2/2) - AFN
If I change to a channel with a different encoding and go back to Afn I get the image again but always with the same message in the Oscam live log.
Any solution?
-
Is there any biss keys for T2Mi channels on 4,8e , freq: 12073H and 12245V?
I did not found it anywhere...
Thanks!!
-
Hi,
I lost reception from the 3 RTRS T2 Mi transponders from Express Am8 -14W:
11544 V 14182 ;
11564 V 14585 and
11647 V
In Flysat info 11544 V 14182 and11564 V 14585 still broadcasting some channels...
Can someone confirm if this 3 frequencies are active or not?
Thanks!!
-
Try to test with increase voltage option on lnb configuration !
I use a 30mtr run of cable and lose about 10% signal i think with a 45mtr run you are losing signal and voltage
Thanks for your time and answer!!
It was a damage in the cable! When i change it everything starts working ok!
And yes, I need voltage increased for motor works... it is a lot of cable!!
-
In my case, I past some time testing but I never get a useful recording on my Dreambox 900 4k...
-
Thanks for your answer...
I tried installing through: wget https://raw.githubusercontent.…Support/main/installer.sh -O - | /bin/sh
But failed:
Code
Display More************************************************************ ** STARTED ** ************************************************************ ** Uploaded by: Biko_73 ** ** https://www.tunisia-sat.com/forums/threads/4120814/ ** ************************************************************ ============================================================= Downloading enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb ... ============================================================= --2022-12-15 17:55:47-- https://raw.githubusercontent.com/biko-73/SubsSupport/main/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb Resolving raw.githubusercontent.com... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 622760 (608K) [application/octet-stream] Saving to: ‘/tmp/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb’ enigma2-plugin-extensions-subssupport_1.5.8-r2_ 100%[====================================================================================================>] 608,16K 2,78MB/s in 0,2s 2022-12-15 17:55:48 (2,78 MB/s) - ‘/tmp/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb’ saved [622760/622760] ============================================================= Installation started ============================================================= Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package /tmp >>>> INSTALLATION FAILED ! <<<<
The massege say
E: Unable to locate package /tmp
see the file on tmp it download but not installed
try manual install
I got the installation. But whenever I access the plugin settings it crashes. That's probably why when I'm on EMC I still don't have access to the subtitles player...
With a lot of regret I'll take a look at AJPanel.... I like the way the subtitle player appears integrated in EMC on openatv!!
-
I've been using this plugin for a long time on an openatv image.
I just installed it on a newnigma but I don't have the subtitle player.
On openatv I access it by pressing yellow-red. I can't find it on newnigma...
Is this subtitle player a separate plugin used by openatv? Can anyone tell me the name of it?
Thanks!
it used by default in enigma for playing subtitle
but subtitle downloader is something else, you can have it from next telnet code
or you can use AJPanel to control setting for subtitle, but it not have srt file or download it -- just it give you control to setting as (delay - bg trans % - text color - text font - text size - alignment - shadow color - shadow size - position & encoding)
all what i mention for dream open source image, and you can try on dream os
Thanks for your answer...
I tried installing through: wget https://raw.githubusercontent.…Support/main/installer.sh -O - | /bin/sh
But failed:
Code
Display More************************************************************ ** STARTED ** ************************************************************ ** Uploaded by: Biko_73 ** ** https://www.tunisia-sat.com/forums/threads/4120814/ ** ************************************************************ ============================================================= Downloading enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb ... ============================================================= --2022-12-15 17:55:47-- https://raw.githubusercontent.com/biko-73/SubsSupport/main/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb Resolving raw.githubusercontent.com... 185.199.108.133, 185.199.109.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com|185.199.108.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 622760 (608K) [application/octet-stream] Saving to: ‘/tmp/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb’ enigma2-plugin-extensions-subssupport_1.5.8-r2_ 100%[====================================================================================================>] 608,16K 2,78MB/s in 0,2s 2022-12-15 17:55:48 (2,78 MB/s) - ‘/tmp/enigma2-plugin-extensions-subssupport_1.5.8-r2_all.deb’ saved [622760/622760] ============================================================= Installation started ============================================================= Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package /tmp >>>> INSTALLATION FAILED ! <<<<
Before trying AJPanel, is there a file with the plugin (SubsSupport) that I can try to install?
-
I've been using this plugin for a long time on an openatv image.
I just installed it on a newnigma but I don't have the subtitle player.
On openatv I access it by pressing yellow-red. I can't find it on newnigma...
Is this subtitle player a separate plugin used by openatv? Can anyone tell me the name of it?
Thanks!
-
Newnigma dovrebbe essere su base originale dreambox. Il percorso è diverso. Freccia giù -> Menù -> Impostazini lista -> Mostra picon e dovresti vedere i picon.
Newnigma should be original dreambox based. The path is different. Down arrow -> Menu -> List settings -> Show picons and you should see the picons.
Thanks!! It wok!
-
I use this skin with Openatv and works great!
I am trying to set up to a newnigma image and i can't add picons to the service list... In openatv is a option in Channel selection menu that does not exist in newnigma!
Any tip to get picons on service list?
-
I've been trying to get this plugin to work on my Dreambox for a long time without success.
With the openatv image everything works fine (with openvpn plugin openatv native) but I need an image based on DreamOs such as newnigma, Dreamelite or Merlin (I need the streamserver) and in these images I never got it to work.
I've tried all these images with all available variants and always without success. Now and after many rounds I got a log file with the error but honestly I don't understand it... the fastestvpn support line (who provides me with the service) is also unable to give me an explanation or a solution...
"Thu Jan 1 01:33:55 1970 OpenVPN 2.3.8 arm-oe-linux-gnueabi [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Feb 9 2018
Thu Jan 1 01:33:55 1970 library versions: OpenSSL 1.0.2h 3 May 2016, LZO 2.09
Thu Jan 1 01:33:55 1970 WARNING: --ping should normally be used with --ping-restart or --ping-exit
Thu Jan 1 01:33:55 1970 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Thu Jan 1 01:33:55 1970 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Thu Jan 1 01:33:55 1970 Control Channel Authentication: tls-auth using INLINE static key file
Thu Jan 1 01:33:55 1970 UDPv4 link local: [undef]
Thu Jan 1 01:33:55 1970 UDPv4 link remote: [AF_INET]xxxxxxxxxxxx
Thu Jan 1 01:33:55 1970 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Thu Jan 1 01:33:56 1970 VERIFY ERROR: depth=1, error=certificate is not yet valid: C=KY, O=FastestVPN, CN=FastestVPN Root CA
Thu Jan 1 01:33:56 1970 TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
Thu Jan 1 01:33:56 1970 TLS Error: TLS object -> incoming plaintext read error
Thu Jan 1 01:33:56 1970 TLS Error: TLS handshake failed"
Can anyone help me?
Thanks!!!
-
I'm trying to install openvpn on a Dreambox900 with newnigma.
I installed the plugin but I can't get the vpn to work...
What files should go in the openvpn folder? With client.conf and password.conf it doesn't work
I use the fastestvpn service and it works well on a Dreambox800 with the same image and even on the Dm900 with Openatv it also works...
Thanks!!
-
I can´t send you Pm... i dont know why...
But i was wrong... i manage to change 1 channel from 1 to 4097.... but the result is completly different from yours...
I get this:
#SERVICE 4097:0:1:FE6:D:1:E080000:0:0:0:
It´s just the first part of your line.
#SERVICE 4097:0:19:1F34:23:46:E080000:0:0:0:http%3A//192.168.1.65%3A8001/1%3A0%3A19%3A1F34%3A23%3A46%3AE080000%3A0%3A0%3A0:V
Where you get the Ip adress ?
-
If you look at my example its the first digit that sets the servicetyp.
For DVB 1 it's of cause 1 so this is the digit you should remove and add 4097 instead for the 1
I did exactly that and the result was that the channel appear without name, only with a number and do not work..
But there is no need to fiddle with any servicetypes until you get your bouquet to work.
Servicetype is just a way to help if the player DVB 1 is causing you freezes and stutter
The bouquet works but with frezze problem...
-
Did you use Hostname or IP Address in RCSC when creating the bouquets ??
here is an example from my personal streaming bouquets so you can see how it should look with DVB 1 and 4097
DVB 1
#SERVICE 1:0:19:1F34:23:46:E080000:0:0:0:http%3A//192.168.1.65%3A8001/1%3A0%3A19%3A1F34%3A23%3A46%3AE080000%3A0%3A0%3A0:V sport ultra HD
#SERVICE 4097:0:19:1F34:23:46:E080000:0:0:0:http%3A//192.168.1.65%3A8001/1%3A0%3A19%3A1F34%3A23%3A46%3AE080000%3A0%3A0%3A0:V sport ultra HD
I used Ip adress...
When you change Dvb 1 to 4097 you keep the original channel (dvb 1) ? After the change i get the same result...
This process is similiar to the process used to create channels when PowerVu channels needed streamrelay?
-
So i install remote channel stream converte and everything works ok until new bouquetes are created.
But when i selec any channel inside the new bouquets the box crashes... if i select that channel on my Phone or Pc it stay´s forever trying to play but nothing happens!
I try to change with wiscp form 1 to 4097 but after that the channel appear withou name, only with a number and do not work!
-
Yes VPN can most certain be the problem but there should be an setting in the OpenWeb where you can assign if VPN connections is allowed
You're right: that option exists and I need it active to be able to connect to the box
. . . meanwhile, enable the "Enable http authentication" function because, as suggested in the menu, "without auth only local access is allowed" and then try
Thanks for the tip but I think (and i could be wrong) that is not necessary.
Connecting to box by vpn , for the box, is the same that connects from your home network