Posts by tbe

same screen on openatv7.3 with skin 1.37

1_0_1_27AB_805_2_11A0000_0_0_0_20230512075119.jpg

Quote from dsayers

I think with these latest atv changes it's either update to latest images or stick to older skin versions with older images.

Just switched to 7.3 and installed latest 1.39 of the skin and the same screen is off centre for me

1_0_1_27AB_805_2_11A0000_0_0_0_20230512074521.jpg

Quote from dsayers

Quote from tbe

Quote from KiddaC

Hopefully this evening we are in a better place.

Because I am moving onto the next one now. slyk onyx skin refactoring. (which is pretty much the same as slyk q anyway - so shouldn't be too much hassle)

Latest 1.39 has 'broken' some screens that were working correctly with 1.37. One example is attached from 1.39 that was correct before. Running on vu+ 1_0_19_287B_800_2_11A0000_0_0_0_20230511231314.jpgsolo2k

Fine here OpenATV 7.3 11/05/2023

1_0_19_5230_812_2_11A0000_0_0_0_20230512080947.jpg

1_0_19_5230_812_2_11A0000_0_0_0_20230512081307.jpg

Display More

There has been an update overnight on openatv 7.2 and the screen I showed is now centred again so all is good

Quote from KiddaC

Hopefully this evening we are in a better place.

Because I am moving onto the next one now. slyk onyx skin refactoring. (which is pretty much the same as slyk q anyway - so shouldn't be too much hassle)

Latest 1.39 has 'broken' some screens that were working correctly with 1.37. One example is attached from 1.39 that was correct before. Running on vu+ 1_0_19_287B_800_2_11A0000_0_0_0_20230511231314.jpgsolo2k

Quote from biko

Quote from Captain

vuzero4k not online, but i have enable the build, server is busy at the moment, in 3-4 h devel online

Thanks a lot

can you please explain more about how to download the devel image to install via neoboot
is that will be from flash online or software update

if it from software update is that meaning it will be replaced on current image

My experience using multiboot is that it overwrote the existing image through software update. 7.2 became 7.4

Quote from szprot5

Quote from tbe

Quote from Warder

You write obscenities. The fact that you do not know how to install or configure something does not mean that it does not work.

Here is proof that, for example, Multi-Stalker runs fine under OpenATV 7.3.

1.jpg2.jpg3.jpg4.jpg

Not sure why you are being so aggressive or is it just the translation? Anyway running the command from your post 1 of your multi stalker thread Multi-Stalker plugin

wget -q "--no-check-certificate" https://raw.githubusercontent.…in/Downloads/installer.sh -O - | /bin/sh.

This installs v1.3 for some reason and this promptly crashes my box. I assume the command above from your initial post is incorrect and there is another one I should be using.

UPDATE:

I followed your advise from anther post (as below)

Install the DreamSatPanel plugin in the box

Code

Code

wget -q "--no-check-certificate" http://ipkinstall.ath.cx/ipk-install/DreamSatPanel/installer.sh -O - | /bin/sh

This now gives me the following message

1_0_19_52D0_814_2_11A0000_0_0_0_20230508142212.pdf

Display More

load to /tmp

and issue the command in telnet

Code

tar -xzvf /tmp/*.tar.gz -C /

and light will appear to you

Display More

Thank you for your help

Quote from Warder

You write obscenities. The fact that you do not know how to install or configure something does not mean that it does not work.

Here is proof that, for example, Multi-Stalker runs fine under OpenATV 7.3.

1.jpg2.jpg3.jpg4.jpg

Not sure why you are being so aggressive or is it just the translation? Anyway running the command from your post 1 of your multi stalker thread Multi-Stalker plugin

wget -q "--no-check-certificate" https://raw.githubusercontent.…in/Downloads/installer.sh -O - | /bin/sh.

This installs v1.3 for some reason and this promptly crashes my box. I assume the command above from your initial post is incorrect and there is another one I should be using.

UPDATE:

I followed your advise from anther post (as below)

Install the DreamSatPanel plugin in the box

Code

wget -q "--no-check-certificate" http://ipkinstall.ath.cx/ipk-install/DreamSatPanel/installer.sh -O - | /bin/sh

This now gives me the following message

1_0_19_52D0_814_2_11A0000_0_0_0_20230508142212.pdf

What I find on openatv 7.2 is to run the script as given in the earlier posts and then reboot. Once restarted you will see no change but if you then go to software update it will return a list of updates relations to 7.2 > 7.4 updates. Update as normal and when rebooted it will show info as 7.4. I can only state this method works form me on a vu+ solo4k. Not sure how real this is as plug-ins like MultiStalker that does not work in 7.3 continues to work if updated from 7.2 to 7.4

Quote from Trazy59

i try 2 browsers same problem...if someone could upload the skin in MediaFire or some thing like that ..thank you

That happens to me sometimes but it is normally named as ****.ipk.deb so I just remove the .deb and works for me

Quote from urie

Quote from Lippei

openatv 7.3 nun als current Image festgelegt im Download

not on gigablue quad uhd 4k or on zgemma h9 combo

even after

wget -O - -q https://feeds2.mynonpublic.com/devel-feed | bash

did not appear in my downloads manager but when I check information in the main menu it states 7.4 Dev version although have not seen anything different yet, vu+ solo4k

ran it over 7.2 using a multiboot image

Quote from isah2

Quote from oktus

Display Spoiler

OPEN ATV 7.4 by oktus

900.jpg

where is this release?

Thread

openAtv 7.4 devel Images

servus,

update auf 7.4 ganz einfach gestalltet .

einzige Vorraussetzung 7.2/7.3 auf der Box.

(Code, 2 lines)


danach blaue Taste -Softwareverwaltung-software aktualisieren

danach habt ihr ein Testimages 7.4 auf der Box mit aktuellen E2 + allen Updates .

Viel Spaß beim testen .

Lippei

May 4th 2023

Quote from Willo3092

Quote from urie

seems to me as not changed Willo,

That's not KiddaC's skin in your screenshots. It should be full screen and more like this.

I've been having a go at it myself but the actual info list doesn't look right. There is a pipe after the colons.

1_0_19_CD6E_844_2_11A0000_0_0_0_20230426213312.jpg

No such issue on my vu+ solo 4k - sorry just noticed yours is 7.3

1_0_19_83C_83D_2_11A0000_0_0_0_20230426213841.jpg

Quote from abu baniaz

Off topic. Can you post a picture of your receiver? I am wondering if it is the same OEM as a a Technomate 3T Combo

It works ok when using the cables from the vu+ so something wrong with the other cable feeds from the dish.

Photo as requested and I think it is as you said

IMG_1151.jpg

Quote from abu baniaz

OK, we will need to show the polarisation ( vertical/horizontal) in the failure message.

You should be getting over 850 services. Looks like you have a faulty LNB. Some Sky LNBS have a weird fault when two receivers are connected, they fail. For that particular, you would have to test by putting solo 4k in deep standby, not just standby. You can rule out the receiver being at fault by taking it to where the Solo 4K is and using those wires.

I would recommend that you get a unicable LNB to get the most of our Solo 4K.

Thanks, will move the decoder tomorrow morning to where the vu+ is located and see what happens.

Quote from abu baniaz

When you scan using tuner B (not using ABM), how many channels did you get? If you go to signal finder, select tuner B and also select the transponder in your screenshot, do you get a lock?

Edit:

Was Solo4K using the same cabling? Or are both receivers connected?

11426H shows nothing but 11426V shows 91% and locked

just rescanning to get number of channels it finds, I think it was around 450 but will confirm when completed

Using different cabling as in different rooms but coming from the same dish.

UPDATE: returns 385 channels

Quote from jenseneverest

Not use this is STB before..... i assume tuner A and B are satellite and tuner C is dvb/t ?

So you have 2 satellite feeds and 1 terrestrial plugged in ?

Correct

If this is not in the correct location then please move.

Using an old Worldvision Force1 Plus with triple tuners running openatv 7.2 I have run into a problem when running ABM. If I run Automatic Scan then everything tunes ok, run a Manual Scan and select each tuner in turn and all 3 tune ok, however if I run ABM setting one of the providers as FreeSat UK then tuner B fails. Any help/advise would be appreciated as all tuners appear ok (2 x DVB-S2 & 1 x DVB-T2) My vu+ solo 4K

2023-04-16_174102.png

has no issues using sky or free sat.

Quote from abu baniaz

You don't have to install anything. With no menus showing, long press of blue button

Enable mini TV

I have just tested this on a duo 4k. The solo 4k should do the same.

Does exactly as you said on the solo 4K

Quote from bellejt

gave command in telnet but says command not found:

Code

install plugin enigma2-plugin-extensions-e2ixxxupdate_2.7_all.ipk 

Installed manually with unzip.Works but no logo for XXX. In directory logos I see XXXlogo.png .Do i need to change something else to see logo ?

You will probably find that the py file is called hostxxx and then duplicate the icon and rename it to be the same as the capitalisation of the py file. Example if hostxxx then the rename the duplicated icon to xxx100.png, you would need to delete the original png as it will see the file name as the same regardless of the capitalisation.

Tried both commands with the same result of Failed to read…….

The 2nd command also created the stalker file in home but as said same result.

Probably just as easy for me to leave it as is and copy it between images. Would love to be able to fix it but do not want to take up more of your time. Thanks