Posts by toysoft

Quote from brutus1979

Thanks for the reply, I need to look for some tutorials, I'm not familiar with this.

It's extremly simple, you have a web interface on that device (that has an IP in your network), and you can select if you want resizing or just the output, as well as if it's H264 or H265. Then you will have a link (which can be accessible via your router/modem if you open the port)... and this way you will have the stream available thru internet.

A link this way

http://192.168.1.100/index.m3u8

and the m3u8 file,

#EXTM3U
#EXT-X-STREAM-INF:PROGRAM-ID=0,BANDWIDTH=3276800,RESOLUTION=1920x1080
/0.m3u8

TS

pasted-from-clipboard.png

pasted-from-clipboard.png

You can but you need a very powerful internet bandwith... as it's upload that is generally much lower than download.

I found this on Aliexpress (Take H265/H264 and not only the H264 for better output, but need UHD reader), which works excellent, on my 100 Mbps line,

See : https://a.aliexpress.com/_EHb4GTs

TS

pasted-from-clipboard.png

DM800HDse : OpenPLi 9.xStar 20250328 + FFMpeg and GStreamer

openpli-enigma2-9xstar-dm800se_with_Full_Installation_on_HDD.zip

OpenPLi Release by OpenPLi Team, 20250328

- Python 3.9.9

- GStreamer 1.20.5

- FFMpeg 5.1.2 and Exteplayer3, ServiceApp (Dash Support, iCam via StreamRelay)

- EPGImport Built-in

- AC3+/DDP/EAC3 support

- Feeds online (For Wifi/DVB-T Dongles)

- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)

- Wifi Realtek, Ralink, Mediatek Supported

- CI+ and IPTV Support Built-in

1300 Free To Air FREE IPTV Channels from their broadcaster

100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)

- Japhar Sim Required

DM800se Japhar on MEGA :

https://mega.nz/file/i2ABCJwC#uqA7ZhCKaLlB93jjG9FuI_LYIAvZ-ekqEn5L_MBHLrM

DM800se Japhar download :

http://downloadcenter.japhar.net/images/enigma2/dm800se/japhar/openpli-enigma2-9xstar-dm800se_with_Full_Installation_on_HDD.zip

Drivers ? Memory Cache ?

On VU+ there is no such issue on all boxes, because they allocate 50% of the RAM to cache.

TS

Quote from service1

Hello, i'm back here.

I've try the new (and old) images 8xstar on other receiver DM7020HDv2, same problem, the images flash well but does not landing.

Image tested:

OpenPLi Release by OpenPLi Team, March 28th 2025
DM7020HDv2 :

http://openpli9xstar.japhar.ne…ma2-9xstar-dm7020hdv2.nfi

Then i was back to the OpenPli 12.3 custom build to try the CI+
Kabelio-->Plug and Play, works perfect
Tivusat-->Humax CI + Black card, not supported {i have to play with CI+ helper & co.}

toysoft feel free to send images to be test or alternative process to write it into the memory.

B.R.

Display More

Flash the factory image in recovery mode, and boot from it, then only after flash our image.

Also try to reboot again after 1st boot, as in some models it needs a first boot to then work from second boot.

TS

Quote from satwidadi55

ce fil de discussion est probablement obsolète. Il est donc recommandé d'en créer un nouvea

No, this is a valid and actual post,

TS

Quote from Schpountz

Quote from toysoft

Quote from triko333

Which OE 2.0-based image works best on the flash memory of the Dreambox Two device? Can you recommend an image for this? Thank you.

I personally use on all my DreamOne/Two, my version of the OpenPLi Teams image, as I built it, so the actual OpenPLi...

There is also an PurE2 (but wasn't updated I think), and the OpenBH from Storm, as well as the OpenATV from Captain and Storm. In fact the software is the same, you have the "usual" adapations between open images, with personnalisations, that really depends of your taste and use.

TS

Display More

Please you have a built openpli version for internal flash dm920 ???

Display More

Yes, you have it published on the download links, and posted here on DM920 section,

OpenPLi 8.xStar : http://openpli8xstar.japhar.net/OpenPLi8xstar/

OpenPLi 9.xStar : http://openpli9xstar.japhar.net/OpenPLi9xstar/

TS

Quote from triko333

Which OE 2.0-based image works best on the flash memory of the Dreambox Two device? Can you recommend an image for this? Thank you.

I personally use on all my DreamOne/Two, my version of the OpenPLi Teams image, as I built it, so the actual OpenPLi...

There is also an PurE2 (but wasn't updated I think), and the OpenBH from Storm, as well as the OpenATV from Captain and Storm. In fact the software is the same, you have the "usual" adapations between open images, with personnalisations, that really depends of your taste and use.

TS

Yes, all images SSLxxF will work on that box, the SSL84F was released after the SSL87F. The Ferrari sim will be able to run all images that are SSLxxF.

So you can go, no problem

TS

Quote from Satmeter

Thank you very very much for your kindness, really appreciated.

Yes the Openatv image has the same tuner handling problem. The only OE2.0 image working well is the Openvix.

Could you please explain better this github link you posted?

Maybe the problem could be solved downloading files from there? Whih file? Thank you again.

At what I can understand, since April, this should be fixed on the OpenATV as well, try to test a latest version,

This is the patch to have it working on the Open images (such as OpenATV), I think Captain compiles it since April with it.

TS

Quote from Satmeter

Anybodyelse has the same FBC tuner like me in the DM920?

This limitation is very annoying, because all these OE2.0 images are not suitable. Bad luck.

I passed your message to Captain, from OpenATV Team, if something can be done for the open images,

Got already the reply, we will try to implement,

[FBC] · openatv/enigma2@5f81b08

* don't show all DVB-C FBC Tuner * fix connected with list * add input setting for DM9x0 * fix DM9x0 FBC handling (partially taken from openVix)

github.com

TS

The DM7020HDv2 image is for the v2, you cannot use it on the v1.

About the streamrelay, there is no difference in the firmware between all the images, its all the same "compile"... difficult to know and understand, I can only think about some differences in the configurations... software level it's all same type of hardware between DM7020HD (BCM7405 like DM800HDse) and DM8000HD (BCM7400), broadcom chipset.

Read : https://en.wikipedia.org/wiki/Dreambox

TS

It should be on the left side, did you selected the "commander" like view ?

TS

pasted-from-clipboard.png

here, https://winscp.net/eng/downloads.php

TS

Install IP Scanner, find the IP of your box,

Advanced IP Scanner – Téléchargez un analyseur de réseau gratuit

TS

Quote from until061

Hello,

Does anyone knows how long the V6.0 will stand? Is the reader above also functional for the V6?

Thanks and good day to all :-)

v6, worked with my cards (until these were swapped to v7).

TS

[reader]
label                         = SSRv6
description                   = SSRv6
protocol                      = internal
device                        = /dev/sci0
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
caid                          = 0500
provid                        = FFF430,060200,060210,060220,060230,060240
srvid                         = 36E3,36B3,03B7,36B9,4333,36B2,4334,36B8,4331,0385,4332,038B,038F,4335
group                         = 1
emmcache                      = 1,3,15,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
ratelimitecm                  = 3
ecmunique                     = 1
ratelimittime                 = 10000
srvidholdtime                 = 2000
cooldown                      = 30,600

Quote from refat Hassan ali

What kind this sim i found in dream box 800hd pvr original

It's a Sim 1.0, so you can use images up to SSL72.

Better to replace with a clone sim, there is Ferrari, Sim2, estar and Japhar... if you want to use the latest OpenPLi 7.3 for that box (DM800HDpvr).

TS

Quote from thussuz

bu imajaa uygun hangi oscam ipk dosyası uygun..tşklr

Which oscam ipk file is suitable for this image..thanks

It's pre-built-in the image, the oscam and oscam-emu,

TS

Quote from oottppxx

Quote from axes

Thanks for replying, but I intend to make the configuration that is best for me, but since nothing is opened...😕

I've tested OpenPLi 9.1; while I don't work on some permanent fix, on Github, and update the version, you can try and edit /usr/lib/enigma2/Plugins/Extensions/QuarterPounder/plugin.py, adjust line 11 so it reads "openatv_like = True", save, then restart enigma2 (you might want to do the edits outside of the box, which is fine, just upload the edited version to overwrite the old plugin.py, and make sure to restart enigma2 after doing so, before you try and use the plugin.)

On OpenPLi it should be

/usr/lib/enigma2/python/Plugins/Extensions/QuarterPounder/

Very nice plugin, works well on OpenPLi 9.xStar,

Thank you.

TS

Quote from biko

official site here

they have offer now 99€ 349 € Standard Kit with 12-Month Residential Service | 30-Day Trial

Exactly, received that same email for 99 Euro,

Link :

https://www.starlink.com/fr/residential?referral=RC-3649787-74537-85

TS

pasted-from-clipboard.png

pasted-from-clipboard.png