Alternatively, paste the following in your web browser address. You have to change the x values to make your receiver's IP address.
OSD
http://192.168.x.x/grab?format=jpg&mode=osdFull screen
http://192.168.x.xx/grab?format=jpgWhy do we need clues to find out what is going on? Just say what the problem/issue is in specific and reproduceable terms. Please also attach a screenshot of your settings page.
With regards to the issue you mentiond, some channels being swapped with their HD equivalents, this is toggled by the "Custom Channel swap" option. Default is "yes", if you don't want this, change it to "No". Swap takes precedence over sort, I would disregard post 12 for this issue.
Only way for people to know what version you have is for you to say so. (Unless we are invited for a cup of tea.)
Understanding the fault/issue you ar eexperiencing currently a challenge. Which of the following statements is true:
1. AB 28.2 is not working, it is not creating bouquets.
2. AB 28.2 is working, but the bouquets are not at the top.
Thanks I understand now what is happening my first tuner is using auto Bouquets to record and I try to view a second channel I will use the other tuner. As I also have a full sat listing channel list this is being used over auto for the second tuner. Do I have to remove the second all sat list to enable auto to work correctly ?
You are misunderstanding. Autobouquets is only used to acquire the channel frequencies and write/update the bouquets. Once you have run it, that's it. there is no interaction with the plugin until you next run it. It is not used at all for chanenl selction. If you dnt believe me, uninstall it. The bouquets it created will still be there.
Perhaps you ca explain the problem/issue you are having as fully as possible. Every single detail please.
Service (channel) data is not specific to tuner. You do not need to run plugin or scan for each individual tuner. The data will be written to lamedb file irrespective of which tuner is used for the "scan".
When selecting a service, Enigma2 will select the appropriate tuner. Default is to leave as many options available for the user. So if you strem /record a second service which is on same TP as main channel, a second tuner will not be used.
That was the theory. If you are having issues using multiple tuners, describe what dish/lnb/ diseqc/cabling (in terms of hardware) is connected to each tuner. What is each tuner configured as (in terms of software)?
Enter webif (type ip address of receiver into your web browser)
Click on current and details will be shown.
By "number under picon", do you mean the name? That must be the same as the service reference of the channel. Easiets way is to open webif and you can then copy the service reference from there and just paste as the name of the picon.
itvbeplus1.png
1_0_1_279B_805_2_11A0000_0_0_0.png
If you are using a recent openpli or OE_A image, itvbeplus1.png will work
For the tuner connected directly to second port of LNB, set as mentioned above "Second cable of motorised LNB"
This is a tutorial on how to use dreamboxedit
http://linuxsat-support.com/showthread.php?t=86
Any channel list for an Enigma2 receiver will work. Transfer using Dreamboxedit or Dreamset
For 28.2, If you are using ABM (also works on OpenPLI images), you can select *** UK (SD), this is ZoomZoom Luke's edit. There is a section in the xml where you can edit it so that all the adult chanenls are skipped. You can also add individual channels to the blacklist section.
There was an issue with image version and motherboard versions. If you had an older motherboard, you had to use a differnt image.
Try latest image see how that goes
The telnet command is
/usr/softcams/mgcamd(Assumption that mgcamd exact name. You can double check by FTP client of exact name)
However, the one from the openvix cams section on forum works fine and I would assume that the one on the LSS plugin would be fine.
http://linuxsat-support.com/showthread.php?t=1689&p=241036&viewfull=1#post241036
Which image build version have you got?
Do you have a Vu+ clone?
On the DM500, the tuner is embedded on the motherboard, hence why you change componenets on the motherboard, for example q72 for signal issues.
Your's is different. One of the reasons why they are pluggable is so that faulty tuners can be replaced instead of the whole motherboard having to be sent off for repairs. Based on the DM800, the only thing that will be supplied will be the voltages. If you cannot find the manual to rule this out, perhaps you can test your tuner in a DM800 as they have the same tuners?
You may be using an older version which used the older SSL. A method of finding out error is to attempt to start it by telnet.
Far simpler to do as in post 2, then install it from plugin feeds.
I cannot remeber if it was on this forum or not, but there was another thread with a red light syndrome. The SMD capacitor di not completrely resolve the issue.
Anyway, it is less than 12 months old, so should be covered by guarantee. Have a word with your retailer first before attempting a fix.
There was a similar thread a while back. It's not necessarily a clone.
http://linuxsat-support.com/showthread.php?t=62475
They replaced the capacitors with the SMD type. You do have them.
There is a problem with the server. Manually download his channel list and install it using DreamBoxedit/Dreamset.
