pc linux, pentium 4, phoenix card reader, oscam version 1.20 #6596 unstable...ring any bells haha?
Posts by AfyB
-
-
A few months ago I changed my settings so they were good to update entitlements using mgcamd, entitlements update no problem with the settings in the first post of this thread, is there anything I can change in there to make it more stable so clients can connect and not drop off?
-
You can run oscam on its own, or you a client or serv?
-
I am already using Mgcamd on my receiver, but suddenly I have client drop outs and some clients who can not connect, so I am looking to check my settings
-
Are you using the above settings on a pc linux?
-
Can you use mgcamd all the time or should you limit its use and use Cccam once entitlements have updated?
-
2012/07/10 17:26:24 B7608B20 c anonymous disconnected from 86.168.....
2012/07/10 17:26:24 B7608B20 c thread B757BB70 endedThis is what is shows when someone can not connect.
-
Hi guys, I am having an issue where clients are not able to connect to the server. It does not give me anything in the log apart from :
2012/07/09 20:20:24 B7500468 c afy disconnected from 92.22.2.....
2012/07/09 20:20:24 B7500468 c thread B7631B70 ended!However all the clients are doing is turning the box on.
I also found this in the log today, is this normal?
012/07/10 17:12:15 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #6596 (i686-pc-linux)
2012/07/10 17:12:15 0 version=1.20-unstable_svn, build #6596, system=i686-pc-linux, nice=-1
2012/07/10 17:12:15 0 client max. idle=120 sec, debug level=0
2012/07/10 17:12:15 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2012/07/10 17:12:15 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 msI am using a PC windows Pentium 4, with Ubuntu, Oscam #6596 version 1.20...I have a very small client base so can't understand why they can not connect on their end. The only way they can is if I reboot Oscam, that lasts for around 24hrs before they have the same problem. Can someone please try and help me please, really could do with your support....thanks in advance
-
-
For a Phoenix card reader should I use emmcache = 1,3,2 or emmcache 1,1,2?
-
It seems as though the Oscam needs to restart once every few days or the clients drop?
-
c cccam(s) afy: connection closed by client, n=-1.
2012/07/09 20:20:24 B7500468 c afy disconnected from 92.22.2.....
2012/07/09 20:20:24 B7500468 c thread B7631B70 ended!
This is what shows up when a Client can not connect.This is the totals at the bottom of the users section, can't figure out why people can not connect?
Total Disabled Expired Active Connected Online OK NOK IGN TOUT CACHE TUN Action
18 1 0 17 9 3 113362 (97%) 180 (0%) 0 (0%) 0 (0%) 3286 (2%) 0 (0%) -
I changed the group in user from 1, 2 to 1 as I read this in another thread. I'll see how it goes for the rest of the day and hopefully I can get something from the log.
-
How long can I keep the log running for? Can I sleep whilst its running or will it overload?
-
Hi, I have had a problem tonight where clients just disconnected and were not able to connect. About 3 clients. These are my configs, I cant send you a log as I dont have one. Running oscam on pc linux, ubuntu.
oscam.conf
[global]
logfile = /dev/null
cachedelay = 120
nice = -1
preferlocalcards = 1
saveinithistory = 1[monitor]
hideclient_to = 15
appendchaninfo = 1[newcamd]
port = *****@0963:000000
serverip = 192.168.1.
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1[cccam]
port = *****
reshare = 1
version = 2.2.1[webif]
httpport =
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0-255.255.255.255
httphideidleclients = 1################################################## #############################
oscam.server
[reader]
label = UK
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,3,2
group = 1
caid = 0963
ecmwhitelist = 0963@000000:3E,4B,4E,4F,42,44,45,47,53,54,56,61,62 ,64,68,6A,6B,6D,6E,6F,62,67,68,69,7A,7C,7D,7E,71,7 2,73,77,78,79,80,8B
ident = 0963:000000################################################## ####################################
oscam.user
[account]
user = Example
pwd = Example
group = 1,2
cccmaxhops = 2
cccignorereshare = 0
keepalive = 1 -
Hi guys I have a small oscam server but I have a small freezing issue with clients. Are my settings ok or would you suggest changing anything. I am using PC, Ubuntu Desktop, with smart mouse reader for Sly UK. Settings are : -
oscam.conf
[global]
logfile = /dev/null
cachedelay = 120
nice = -1
preferlocalcards = 1
saveinithistory = 1[monitor]
hideclient_to = 15
appendchaninfo = 1[newcamd]
port = *****@0963:000000
serverip = 192.168.1.
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1[cccam]
port = *****
reshare = 1
version = 2.2.1[webif]
httpport =
httpuser =
httppwd =
httprefresh = 15
httpallowed = 192.168.0.0-255.255.255.255
httphideidleclients = 1###############################################################################
oscam.server
[reader]
label = UK
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,3,2
group = 1
caid = 0963
ecmwhitelist = 0963@000000:3E,4B,4E,4F,42,44,45,47,53,54,56,61,62,64,68,6A,6B,6D,6E,6F,62,67,68,69,7A,7C,7D,7E,71,72,73,77,78,79,80,8B
ident = 0963:000000######################################################################################
oscam.user
[account]
user = Example
pwd = Example
group = 1,2
cccmaxhops = 2
cccignorereshare = 0
keepalive = 1 -
Deerhunter any news on the above from your last post? has the setting changed anything for you?
-
watch out for a guy called Stefan!
-
did it update? there is a tutorial on how to set up mgcamd on ur receiver, that updates card, tried n tested
-
Sorted it, entitlements have been updated with settings I posted, small error was
au = uk should have been in capitals (UK) to match the reader