Posts by Alienato

Quote from devil61

Code

Excuse me, what do you mean by service app, I don't know it, I'm not that expert

If you have an enigma2 image can find it in the feed > Menu>Plugin>Green Button>System Plugins> Service App install it and configure

Quote from devil61

Code

I too have the same problem I thought it was the decoder, maybe something has changed, let's hope that the great Mino60 whom I thank for his work with freeserver can solve i

Did you try with "service app"? If you have it installed and working switch it to default....vavooSID should work on both (exteplayer and default) m3u lists on default, working for me on octagon with o.Atv 7.3

Quote from pAkEr

hi,

New OpenATV 6.4 image and problem. It doesn't download servers. What is wrong?

I think you should install curl, in telnet give this command

opkg install curl

reboot and try again , remember that OpenATV 6.4 isn't supported anymore

Quote from Barry Goodchild

Hello

I need some help with the Octagon/ Openvix interface for multistream.

I am trying to receive the multistream French channels at 5W with an 80/85 cm dish and an Octagon SF8008 receiver. I can receive all the multistream unencrypted channels at 5W, including the Italian channels, with the exception of those with the following technical criteria

12732 V, DVB-S2, 8PSK, 29500, 8/9

PLS Gold, 50416.

The problem is that the Octagon/ Openvix interface will only allow the insertion of either 1 or 2 in the PLS number.

There might be other reasons blocking reception. However, I want to eliminate the PLS number problem first. A blind scan does not recognise any channels at the relevant point.

Does anyone know of a fix? Do other multistream receivers have similar limitations?

Thank you for your help

Barry

Display More

On that trasponder my Signal Meter says :

SNR =99%

AGC =83%

BER =0

Tuner A Si 2166D (DVB -S2X)

Trasponder = Default

Satellite = 5.0 W Eutelsat 5 West B

Trasponder =12732 V 29500 8/9 MIS 6 Gold 50416

and the reception is perfect on Octagon SF8008 with OpenATV 7.3 from southern Italy

That was my problem too about 1 year ago , it seems that the IR on the front of some SF8008 boxes doesnt work well , I was lucky to buy it from Amazon and also after 4 month they refunded me but I bought a new one and till now is workin' fine!

I'll post the Open Atv 6.4 that is supported no more , but I think is still good for the 750 mb processor ( if your box is same than mine) I have had difficulties with 7.1 , 7.2 and 7.3 . For other images you have to Google....

h**p://images.mynonpublic.com/openatv/6.4/index.php?open=mbminiplus

forgot to write that Sunray Herobox cpu is Mipsel32, so check yours

Quote from estaka91

Good afternoon

Yes, it is not the first time that I flash on several machines, but I had never caught any of these machines.

I'll try to search a little more for Miraclebox MiniPlus

Thanks

When you download the file for Miraclebox MiniPlus unzip it you will have a folder named "Miraclebox" and inside it another folder named "miniplus" , rename this one in "Herobox" and like you have already been told rename also the file "noforce"in "force" then place the folder "Herobox" in a 4GB usb pen .

I have a Sunray Herobox and this is the way I flash it

Quote from marty1

cant get this to work... when i click on server 34 ...vavoo it crashes on me.....i have added the channel list in temp and installed but nothing showing in my list........ as for server 35... had it working but now when i download the list is blank no channels appear in 35.... image is openatv 7.3 ...on a vu solo4k

have you got curl installed? if not install it , then when ur on iptv server 34 click (if it doesnt crash) on blu button wait for the end of execution go to /home delete vavoosid.sh an vavookeys and ull find new bouquets vavooSID should work fine , while m3u bouquets depends....they work fine on my sf8008 but not on zgemma h9s.

Quote from alcomys

and again after the update there is no server update even not after waiting an hour.

also did try manual but nothing.

Blu button /Download some of the files / Freecccamserver (30)

Quote from cvd

Quote from cvd

Quote from piterfree

Nooo multistrim

Yes multistrim

Display More

Asked to Gigablue.de. Waiting for reply
Could be a lack of drivers in firmwre?

Display More

Here we are with the reply of Gigablue:

"Yes, I know that. S2x only works with an additional tuner.

with the built-in later when drivers are ready "

The tuners built-in Tuners are DVB2SX but the driivers are not redy, yet!

Display More

What a rip-off! But having paid that price I wouldn't mind buying an extra tuner! But you can always if you want rescind the purchase I hope...

Which kind of settings are you using ? Tell me i'll test on my own sf8008 box, by the way i'm using VHannibal motor with no dtt!

OK then you should clear them if you don't something's wrong with the tuners , try to configure them both again and then do a scan of the satellite at 9.0! East

Quote from cvd

Quote from Alienato

Quote from cvd

Yes, i mean TVSAT Italian Channels
I live in Bergamo, Italy
Thank you

For me VHannibal's Motor Settings is OK in southern Italy for both bouquets national DTT and regional DTT , i have zgemma h9s and Octagon SF8008 and no problems with multistream.

Ops Drini73 gave you the right answer

the matter is about reception of TVSAT By satelite un position 9E in multistream, not by DTT

Tivusat is only on Hotbird at 13.0 East , at 9.0 East there are Multistream channels they are meant for Italian DTT and are mainly from Mediaset , Rai channels are at 5.0 W , now your receiver GIGABLUE QUAD 4K hasnt a S2x tuner that is optional , you have to buy and install it so will clear Multistream channels... have a look at this page

h**ps://store.gigablue.de/4k-receiver/gigablue-uhd-quad-4k/gigablue-uhd-quad-4k.html

Quote from cvd

Yes, i mean TVSAT Italian Channels
I live in Bergamo, Italy
Thank you

For me VHannibal's Motor Settings is OK in southern Italy for both bouquets national DTT and regional DTT , i have zgemma h9s and Octagon SF8008 and no problems with multistream.

Ops Drini73 gave you the right answer

The easiest way to upload a setting list in Define 6.4 is the use of Dreambox Edit u have to send them in this directory

/home/gx/local/enigma_db/

so set your Dreambox Edit with decoder Profile Name , IP , pass (root root should be) and the path and save . Then transfer the files....

Sorry, i forgot to say that Define is not an Enigma 2 image so probably would be better to move this thread in Octagon Section where there will be more help!

Do not know what u mean but my post has english translation!

Quote from vedovanera

Quote from Alienato

vedovanera

I think you're mixing 2 different plugins give answers concerning this thread and plugin

yes i know....but that script you can use also in Freeserver to setting in cronotimers......finally both plugins work in the same way....so i use that script in this way....and works....only reboot Oscam manually when you want to watch tv

So I think you should open a thread of its own and explain your findings .

vedovanera

I think you're mixing 2 different plugins give answers concerning this thread and plugin

Quote from pesat1996

I have original card. With normal oscam it does not open Super Tennis HD.

Come vedere SuperTennis in HD?

SuperTennis è visibile gratuitamente in HD sul canale 64 del digitale terrestre, sulla piattaforma satellitare SKY canale 224, oltre che in simulcast streaming su http://www.supertennis.tv.

Cercando su Google...

Super Tennis HD is visible for free on italian DTT channel nr 64 , channel 224 on sky it and on streaming simulcast

Quote from Chris230291

Yes nagravision and videoguard. Maybe others?

pasted-from-clipboard.png

I was wondering if anyone opened them using a Sky CAID?

Not as far as I know , but you have had this answer many times....