Posts by kid_warrior

  • Sly UK massive ECM change

    I found this floating around............


    *** has optimized its transponder occupancy on the Astra satellite system at 19.2 degrees East. This affects the option channels, which are primarily used for sports broadcasts. , the previously transmitted on transponder 73 of the Astra satellite system option channels Euro Sport 360 HD 6 *** Bundesliga HD 7 and *** Sports HD 8 switched to transponder 23 with the frequency 11553 MHz horizontal ( DVB-S2, SR 22000, FEC 3/4, 8PSK) . Furthermore, were on transponder 47 with the frequency 11171 MHz horizontal (DVB-S2, SR 22000, FEC 3/4, 8PSK) switched the option channels Euro Sport HD 360 7 *** 8 Bundesliga HD and *** Sport HD 9. Both were previously found on transponder 73. For viewers, refer to the official *** receiver, this has no consequences. However, those who relies on alternative receiving technology or *** via built-in TV tuner and the CI Plus module receives, should perform a channel scan on Astra before the upcoming Bundesliga weekend. Otherwise, the image at one or the other Bundesliga game probably remains black. Some receivers feel this option channels but only when they are active. If your receiver can not find the channels with new parameters, patience is required. effects, the frequency change also for some cable viewers. Not every cable provider feeds all HD frequencies of the provider ***. Since this is especially for the transponder 47 is a very new *** transmission channel, is to be expected that the option channels Euro Sport 360 HD 7, *** Bundesliga HD 8 and *** Sports HD 9 stay with some cable viewers outside before. Source: Digital Television


    - - - Updated - - -


    and this I came across..................*** V14 EMM


    right, they've posted in two
    Had the developer of emm tool asked if you not even can somehow install with in tool, but unfortunately came keien answer And here are the current;-) activation (activation) / Entitlements 51/33 54 / 32 58/33 59/33 63/33 only if the 02 and no box / cam ID in it , pair total driving at 07 6D / 34 84 / 2D 84 / 2f 84/34 84/35 84/36 85/33 85/34 85 / 36 87/34 88 / 2f 88/32 88/33 88/34 88/35 88/36 88/37 88/38 8c / 31 8c / 34 8C / 35 8e / 33 only if the 02 and no box / cam ID inside , pair total driving at 07 91/32 91/33 91/34 Edit: about 4 weeks before the end of the map come new extension EMM these leigen ALWAYS between 31 - 3f then manually write to the KArte and your card is extended

  • Blade5000 Firmware March2014 With 9991

    You should have two files a ".ssu" file and a "config" file, (you can open the config file using notepad)


    Load the ".ssu" file and "config" file onto a pen drive


    Menu - Setup - Update & Backup


    Image Upgrade


    Select the ".ssu" file


    Wait for it to flash the new image


    The box will reboot automatically


    Menu - Channel - Blade Online


    Download the channel list for your area



    The box will reboot automatically


    You should now have FTA channels


    Menu - Setup - Update & Backup - Image Upgrade


    This time pick the config file


    To enter a line manually press Menu - 9991


    Enter you C or N line details


    Save (Yellow Button)


    Exit out of all of the menus


    You will now need to reboot the box, it doesn't do it automatically


    If you want to enter a line by USB


    The original one will work but I have just spaced out the lines in the file to
    make it easier to read


    Open the config file with notepad


    Paste in your line


    C lines are at the top, N lines near the bottom, depending on what type you are using


    Make sure you paste over the "#" at the start of each line you enter


    Save the changes and put it on your pen drive


    Menu - Setup - Update & Backup - Image Upgrade -Select the config file and reboot the box after it has loaded


    After completing this step you can now "upgrade" the firmware to add the 7 Day EPG



    Enjoy.......

  • Blade Media BM7000s - Setting up CCcam Cardsharing for first time help needed

    First select any TV channel and press 9 9 9 1 on the remote, you will then get access to the following server list editor.
    Now select Connection_0


    Once the Connection_0 option has been highlighted click OK
    and enter the following password 9 9 9 1


    Now the password has been accepted you can add or edit your cline details.
    you proberbly received a cline that looks something like this example:
    C: 162.198.109.053 30841 Satman ggLhok6Re4 no
    All you will be required to enter are the following:
    I.D: Satman .........................
    Password: ggLhok6Re4 .........
    I.P Address: 162.198.109.053
    Port: 30841 .........................



    Using the < > arrow keys on your remote change the protocol to CCCam
    Now select option 6 ID and click OK you will now get access to the keypad.


    Now enter the I.D exactly as shown Satman
    once you have entered it click the Menu button on your remote to save it.


    Note: To change between UPPERCASE and lowercase click the red button.
    To input numbers you have two options, you can either use the red button
    and select Others, or enter numbers directly using the remote.


    Now select option 7 Password and click OK


    Now enter the Password exactly as shown ggLhok6Re4


    Once you have entered it click the Menu button on your remote to save it.


    Now select option 9 Address and click OK
    Using your remote enter the Address exactly as shown 162.198.109.053


    Once you have entered it correctly,
    click the Menu button on your remote to save it.


    Now select option 10 Port and click OK
    Using your remote enter the Port exactly as shown 30841
    Once you have entered it correctly,
    click the Menu button on your remote to save it.


    Your details should now look like this:
    Note: only the highlighted setting require to be entered,
    the others options can be ignored.


    Once you have added all the required info, it should then look like this.


    Now click the Exit button on the remote,
    and select Yes to save the settings.


    Only one last setting to do now, and that is to activate the cline.
    Select Connection_2 and click the Red button on your remote to activate it.


    If you have more than one cline you wish to add,
    simply follow the instructions above for each additional cline you wish to include,
    and not forgetting to select a new connection for each cline.



    Enjoy

  • Blade 7000s as a server

    Hi all


    I have a blade7000s box and my mate does with a sly card in it. I'm new to the sat seen (been a cable man for years) so can i share has card? if so what is the info i need to look for i know about the box key etc any help on this would be great..