Posts by green-bright-eyes

I cn't find such a file neither in /etc/tuxbox/config nor in /tmp

Just a curiosity: I'd like to verify the current emm used by oscam but the reading of oscam.log is quite confusing because there are a lot of lines that seems to refer to emm.

How can I check the current used emm?

Thanks

Hello nedal ,

why the proxies are now stored with different groups? It is like vedovanera said.

And, as soon as I changed all groups to 1 it started working again.

I believe that some days ago it wasn't like that. Now I understand why, in the last few days, it didn't work anymore.

Could you change the plugin to assign always group 1 to proxies?

Thanks.

Quote from vedovanera

ok resolved

Yes, it's normal in a forum to share solutions.

Hello,

I believed that the files in

/usr/lib/enigma2/python/Plugins/Extensions/FreeServer/config

like, for instance, oscam.server might be used as the base for our configuration and used to add only proxies server and avoid to ruin our card configurations.

Instead, it seems it is ignored. Is there a way to instruct the plugin to just and only add proxies to our configuration?

Thanks.

What's the feature of the file OscamDATAx.cfg? It says it doesn't find it but what should be in this file? Maybe the basic configuration of our oscam.server? Or what?

Thanks.

What does it work? The cline updating: yes, it works, of course!

But the FCA.sh script (launched by AUTFCA.sh) is updated itself every now and then by the plugin's author and this means it downloads cline from servers not always the same. If you don't use the "Tools" menu, you always use the same FCA.sh and then "old" servers. After a few days you can see it becomes less effective.

No: as I already wrote, AUTOFCA only runs FCA and updates only clines. But FCA as a script is updated itself by the Tool menu.

Thanks!
So, the question is: is there a way to automatically launch the tool periodically, for instance once a day? Within the plugin menus there isn't.

Because, I saw that only setting a cron timer for FCA is not enough to have good servers: am I wrong?

OK, but there is something not clear to me: AUTFCA.sh just launch FCA.sh from the plugin subdir: but FCA.sh always stays the same or the plugin "changes" its lines and updates it when you run the Tool command from the plugin itself?

I mean: I'm not talking about the clines found by FCA.sh but of the servers FCA.sh uses.

Thanks.

Quote from vedovanera

Quote from dav117

Dear team,

Can i auto update “free cline” every day with auto execution of script?!

Thanks

Only you have to add in crontimers the schedule to start the script that you see when download the servers.....it's all

D'you mean AUTFCA? Or FCA?

Hello, just an obvious question (I suppose): the main script FCA.sh is updated with new lines each time you launch the server update by "Tool", right?

It doesn't stay the same...

Thanks.

Quote from samur

Two questions:

1) where is exactly the section in Samur oscam where I can type the URL to update the emm from? At present I'm using this Oscam
OSCam: 1.20_svn Build: r11733-799 Compiler: arm_cak7-icam-l2b_(samur)

and my architecture is

arch cortexa15hf-neon-vfpv4 16

arch static-cortexa15hf-neon-vfpv4 26

arch armv7ahf-vfp-neon 56

arch armv7ahf-neon 56

**********

2) Using the two commands to investigate the libssl version I got two reports that seem to be nothing in common. As a matter of fact, by the command

/usr/lib/libss*.*

I got this report:

lrwxrwxrwx 1 root root 15 Aug 3 10:09 /usr/lib/libssl.so.0.9.7 -> libssl.so.1.0.2

-r-xr-xr-x 1 root root 246652 Jul 28 20:51 /usr/lib/libssl.so.0.9.8

lrwxrwxrwx 1 root root 15 Aug 3 10:09 /usr/lib/libssl.so.1.0.0 -> libssl.so.1.0.2

-rwxr-xr-x 1 root root 297752 Jul 28 20:51 /usr/lib/libssl.so.1.0.2

-rwxr-xr-x 1 root root 707660 Jul 28 20:51 /usr/lib/libssl.so.3

whilst, instead, using

openssl version

I got

OpenSSL 3.3.0 9 Apr 2024 (Library: OpenSSL 3.3.0 9 Apr 2024)

Which one should I consider?

Many thanks

What are these versions called pcsc? Can they be used into a VU+ 4K as the Ultimo4K or similar?

Alphabetical order is good enough to let you know which point of the list you are. And using left/right is a quick way to reach the end. Actually, this is the last of the problems, particularly because you need in any case to export the list onto a bouquet and there you can browse by pressing the keys on your remote and you can delete the channels you don't like.

Quote from balkanac

Lululla

Suggestion for a small change in Skin:

I suggest adding scrollbar

Channel lists are very large, scrollbar tape will help we know in which part is the selection field

Like this:

2024-07-02_141056.png

Display More

What for? There's no need of scrolling: just press lef/right as PgDown/PgUP.

Quote from green-bright-eyes

Now I tried also OBH 5.3 in Ultimo 4K an no configuration works. It really seems the box the culprit

Nothing: in Ultimo4K and OBH 5.4 or 5.3 there's no way, whatever combination of settings I try. I also uninstalled ServiceApp.
In Solo4K, I had success without particularly efforts: installed and worked.

I also tried to uninstall ServiceApp in Ultimo4K.

Now I tried also OBH 5.3 in Ultimo 4K an no configuration works. It really seems the box the culprit

Quote from Lululla

Quote from green-bright-eyes

I tried the plugin in a Solo4K uner OBH 5.3 and there it finally worked! I saw there's a new update to 1.7.

Then I tried again in the Ultimo 4K and OBH 5.4, also updating to 1.7 and also uninstalling, to be sure, ServiceApp, and there it does not work.

I'd like to try the other two "crossed" situation: in Ultimo 4K under OBH 5.3 and under Solo4K under OBH 5.3. But this would require some time...

Take Your Own Tests

Remember to turn off ServiceApp - restart and then try

And then maybe you try with ServiceApp active, with various options

Display More

Yes, because of history in IT I always do cross-tests and I try every options, even the ones which should not work. But the fact that the plugin worked at the first attempt in one scenario and doesn't want to work in the other, despite many attempts, make me think there is something connected to the box (as the image is reported to work in anther box).

I tried the plugin in a Solo4K uner OBH 5.3 and there it finally worked! I saw there's a new update to 1.7.

Then I tried again in the Ultimo 4K and OBH 5.4, also updating to 1.7 and also uninstalling, to be sure, ServiceApp, and there it does not work.

I'd like to try the other two "crossed" situation: in Ultimo 4K under OBH 5.3 and under Solo4K under OBH 5.3. But this would require some time...