P.S.
And also if you save it as UTF-8, there might be incorrect characters in the file which might cause the non-running issue.
Although, this does not happen always and it seems a bit more tolerated, I don't know why, if the script is executed by a cron timer instead of launching by command line. Bizarre!
Display MoreNew version FreeServer python 3 to achieve at 85% if there is a crash please report it...
Hello, mino60,
I found out that the script freeserver.sh in this python3 version was saved not as UTF-8 but as "Wester (MacOs roman), maybe by mistake.
I also found out that this did not affect any way its use under OBH 4.4 that's python2. Instead, it might cause a lot of time waiting or also a completely non-working result under OBH 5.0, that's Python3.
I obviously saved as UTF-8 but maybe is the case to save it with this coding to avoid future issues?
How to enable Wirelles configuration via telnet commands?
Via GUI (openatv, Open BlackHole openPli from multiboot) freezing when i try to enable wireless network (freezing at message "activate your network please wait")
Via multiboot when i select to boot from Flash image(BH latest) wirelesses adapter is working... any help
This means the bug happens only running from OMB. I don't think anything would change by command line.
What image (and version) do you have in flash and which ones in OMB?
Have you already tried to update either the flash or the OMB's images?
This is for sure: If I had done all the needed editing, I would succeed. So, it's surely my fault.
But, maybe, just maybe, the hints were a tad too generic.
In other forum I use to be as more detailed as possible to help other users. ;)
For instance, writing "Read carefully the longer, more detailed post in OSCam Emu section" and not providing any link, was not really useful to me.
But it doesn't matter. After all, each forum qualifies itself exactly by these facts.
I did everything, I think, you advised me to do but nothing changed... even: it seems a bit worse: now you also might have a long delay after zapping to a card-decoded channel.
So, it's a bit frustrating that cards are not immediately used.
Hi, sorry for not answering, but I had some issues these days. I'll try as soon as possible!
Meanwhile, just to be sure, this adding in oscam.server leads to two doubts:
1)
Do I have to add to each reader section the two lines? This way, for instance?
[reader]
services=!Nagra
services=!Viaccess
....
2)
This way, wouldn't I loose the chance of having those "external" readers working for every other channels (not among the two packages for whom I use local cards, I mean) with these two encoding types?
My dear, I know what I write, because it's not my definition but the Oscam one. It's you that name them your way. Oscam name them Readers, and it's so CLEAR.
1)
About oscam.services
In my oscam.services there are many providers' sections but neither a SRG/SSR nor a Tivusat reference (the problem is that Tvsat channels are not provided by a single... provider, if you don't mind the repeat ;) ).
Is this what causes the issue? Should I add these two providers even though I have my cards?
2)
About oscam.server, as I have these two cards.... Tivusat (Nagra) and SRG (Viaccess) it means I should add two lines?
services=!Nagra
services=!Viaccess
?
Actually, if possible, I'd avoid to edit it because it's automatically generated ;)
Although, if not impossible to do something ex-post by a script ;)
OMG: I wrote in first post: "I'd like to know how to immediately have those channels decoded by their cards."
Where is the difficulty in understanding this. I don't know how to repeat it. Why for a few seconds are the the readers that decodes channels instead of my cards? So, this way I've repeated for the 99th time.
I do need. So, please stop comparing two systems that are clearly incomparable. A Quattro (that means 4) won't never be able to become a 3.
This is a technical FACT, not your opinion. If you don't need it, this is your situation, not the objective technical superiority of a Unicable. And, frankly, this thread don't need this misleading opinion.
Just to do the last example, and everyone can judge your messages, I'm going to live with my parents and we'll be distributed on 3 floors and 4 decoders: how could you feed 4 boxes TO BE FREE TO DO as many activities as you need with your very limited Quatto?
My 32 UNs SCR will be able to feed up to 7 FBC tuners each, and this means 21 UBs.
And I DO NEED THIS SCR as many other people do.
And you need ONE cable, from the LNB to your flat. Only inside the flat you'll need to split it.
This is my last reply to you because everyone can read how absurd is your claiming of comparing these two types of LNBs.
END of the story.
Again.... Because YOU need 4 cables and 4 tuners, I just need one cable and one physical tuner!
And, believe me: there are many occasions where you want to record from many different transponders at the same time. Tonight I have 3 overlapped timers, for instance.
In OBH there is no need of crontimers for such a task!
You can set it under the same Time submenu and you can choose to run it every 30 minutes or more..
Never had this issue by OBH: have you tried it?
Is not possible to show picons in Multigraphic EPG by BH: is not OBH!
In OBH you can customise everything, as this specific aspect.
Did you set a password for OWIF?
Did you enable the HTTP authentication?
Yes, oscam.dvbapi have already those lines and others too. And yes: cards are perfectly initialised.
As I said, if I leave just the minimal oscam.server, it works flawlessly.
If cards didn't work, I wouldn't see them working after 3 or 4 seconds after each zapping. They work or they don't.
Here is a problem of priority: I'd like oscam able to immediately use cards instead of readers.
I'm sorry I didn't read this post immediately, because my first suggestion would have been not to replace the PSU, as first step, but to check all your capacitors.
Usually it's easy to recognize a blown up capacitor. A good electronic technician surely should.
With only 2 boxes in the house - frankly, I don't see the advantage...
The advantage are enormously huge!
Forgetting for one second the motor and imagining to have a fixed dish, these are the advantages:
1) By only one cable, having both boxes FBC tuners, you can set up to 7 tuners (A is the physical one, C to H the virtual ones) of VU+ as you had 7 cables.
2) This means many, many possibilities in terms of watching/recording/streaming/PiPing different channels with the same box.
So, the firs box will use the Unicable/SCR User Band from 1 to 7 whilst the second the UBs from 8 to 14.
What I don't know if this simple splitter can do the job. I have a SCR splitter (1 IN, 2 OUTs).
I don't use OpenPli because it's too ugly, but I suppose what I'm going to tell (valid for OBH) should work also in OpenPli.
There is no ordering method you can apply ex-post, but the open images create a bouquet named "Last scanned".
So, what I do is, after scanning only one satellite at the time, to copy all channels from this bouquet to a new one named as I like (for instance DVB-T ordered, 13E ordered, or similar).
OpenBlackHole: elegant and with fixes over openvix (parent) code.
