Don't worry about it, especially think about the setting of the highest sat and then your east and west ends and a strictly straight mast on 2 planes..... anyway, we will always be here to help you within our capabilities....
Thank you
Posts by viper82
-
-
Since you post images from am@zon.it, I assume you are Italian.
Having said that, in the meantime that the "material" arrives, read this guide which was very useful to me when I found myself in the same situation as you (A.D. 2012).
1) Guida montaggio e puntamento motori diseqc-USALS by KAKTUS.pdf
i already printed this guide, but in that guide it doesn't refer as in the manual " type 1, type 2, type 3 "
-
Can anyone please explain to me what this means?
why does it show type 1, type 2, type 3 ?
Hi, there are several standard proposals which are related to the size of the mast, it is marked, 42,50,57 mm.....if you are already having trouble understanding the principle from the start, I wish you good luck for the installation, knowing that the larger the dish, the more the opening towards the signal is restricted........
He didn't tell me why there's this difference in the manual
-
Can anyone please explain to me what this means?
why does it show type 1, type 2, type 3 ?
-
In the settings of the: GT MEIDA V8 Finder 2 Sat Finder. In Loop Search I can insert 4 frequencies which I insert to understand the quality of the overall signal, which one do you recommend? (primary satellite is 16E)
-
That motor is a good make and supports dishes up to 120cm
The satellite dish above i am not familiar with, but the manufacturer website looks very professional.
Feed hunters prefer fiberglass dishes, as they last many many years and never rust, also you can find cheap 2nd hand dishes for very little money.
I bought my 1.2m channel master for £35. Recently i saw 1.8m channel master sell for under £100. These dishes were 10 to 20 times that price new.
If you have the space for it buy the biggest dish you can find, but anything over 1.2m and you will need satellite actuators, and disquet controller, not usuals motors.
thank you very much, very kind as always,
p.s. the engine will arrive on March 17th
-
A bigger dish is always better, you will struggle with some feeds with only a 1m dish
Mount dish to motor, then mount both to pole.
Ok, thank you,
Is the dish I have good for that motor I bought?
-
hi I bought: Rotor motor for DIGIPOWER MOTECK SG-2100A DiSEqC 1.2 dish
Motore Rotore per parabola DIGIPOWER MOTECK SG-2100A DiSEqC 1.2Il motore per parabole DIGIPOWER prodotto da MOTECK, modello SG-2100A è compatibile con ricevitori DiSEqC 1.2. o Usals Dispone di LED di indicazione "guasto" e…www.amazon.itI don't know whether to mount a 100cm or 80cm dish.
The 100 cm dish I have is as follows
ANTENNA PARABOLA SATELLITARE 100CM ACCIAIO BIANCO EMME ESSE MODELLO 80100AANTENNA PARABOLA SATELLITARE 100CM ACCIAIO BIANCO EMME ESSE MODELLO 80100Awww.amazon.itshould I install the 100cm or 80cm one?
assembly:
1) I connect the motor to the pole and then mount the dish to the motor.
2) I connect the motor to the dish and then I mount everything to the pole.
what do you recommend me to do?
-
Display More
Maybe these can help:
F 4F6207BD 00000000 C76858874686511D ;NHL Service 1 (7.0°E)
F 08C27D6D 00000000 C76858874686511D ;NHL Service 2 (7.0°E)
Also, I noticed that you only have 55% signal on that frequency, which is very low.
You need a big dish and good alignment if you want to catch feeds on 7.0°E
In the pic below you can see my values are quite high, but even so I still cannot receive many feed frequencies on this sat.
always black screen.
Could it be due to low signal?
are you currently using engine?
-
-
try this
CodeF 000103E9 00000000 C76858874686511D ;NHL Service 1 (7.0E) F 000203F3 00000000 C76858874686511D ;NHL Service 2 (7.0E)Thanks a lot, I'll try it right away
-
yes, correct.
there are feeds always on if you want to try
in SoftCam.key I entered like this: " F A11FEED5 00000000 C76858874686511D " correct?
this is the result
-
the frequencies are activated only when there are events?
-
how is it set up?
-
yes i own it.
OCTAGON SF8008 Limited Gold Edition - 4K UHD E2 DVB-S2X & DVB-C/T2 (Dual OS) Combo
-
who can tell me how to do a proper feed search ?
-
which channels you correspond to (skit 09CD)
2C29 2C28 007B 007A 0078 0081 0087 006F 0084 0079 0082 052F 3B65 3B64 007C 10E3 1018 10E2 3B62 0086 3B61 10EE 3B63 007F 1C5C 052E 0077 0076 422E
-
I can't tell you, I'd like instead to create a script that inserted in the bin folder automatically update the OSCAM,
perfect, when you have created it let me know
-
OK thank you ,
sorry bui honestly I did not understand how you solved the problem; first you say to uninstall the IPK file then you say to install it and finally to replace it.
And what I did, and now it works
-
" oscam_11718-r798 " " oscamicam " in both you can see it but it freezes every now and then
Ok, now stop oscam, send this to usr/bin folder, replace the existing one, restart oscam.
with the patch inserted oscam.key does not appear in oscam status , I insert the original file, restart oscam, oscam.key reappears in oscam status
