With this plugin after flashing a new image on spark extract the folder plugin at the root of usb.
After a while on screen an icon will appear that box found usb and then a message on screen "do you want to update the plugin?"
Select yes and you will see the progres of copy, all emus are installed . Box will reboot itself.
Posts by arber
-
-
And if you want to change the port of webmin to take out the port 10000 as default edit the file /etc/webmin/miniserv.conf and change the port as you want
-
Nice and free software
-
I tried both them csp/multics bounding both with cache exhange and works fine.
-
java
sudo apt-get install python-software-properties
sudo add-apt-repository ppa:sun-java-community-team/sun-java6
sudo apt-get update
sudo apt-get install sun-java6-jdk
csp
cd home
mkdir cspsvn
cd cspsvn
svn co http://streamboard.gmc.to/svn/CSP/trunk CSP-svnapt-get install ant
this will install ant. once installed we will start compiling csp.cd CSP-svn
ant
now the csp is compiled. -
on bh are saved channels, pin, ccam.cfg, ethernet settings, lnb settings, user and pass.
An during install of any new image vu prompts you to restore settings or not. -
yes universal usb installer can do the job on pc without cd reader.
but on eepc difficult tu install ubuntu server ubuntu deck instead can be installed even a normal distro not a distro for eepc -
Yes it works with or without usb hub
-
Running the latest oscam mips dowloaded in the oscam binaries here found that the last versions need the config files to be at /var/keys not at /etc/tuxbox/config.
Can anyone know why this change? -
Loading enigma2 on spark and spark plus
If you have spark image on box and for the first time want to load enigma2 images as second one do as follows:
1.Load on an usb enigma2 files in a folder called enigma2 and put on box
2. Switch off the box and open keeping pressed OK button until FORC comes on display
3. release OK button and press Ch down until EN16 comes on display
4. Confirm with ok button and some progress will be display and SUCC meaning succeess.5. Switch off the box with the usb still on it
6. Switch on again keeping pressed the OK button till FORC comes on display
7. Release OK button and press VOL up button U_LD comes on display and progress till installation of enigma2.
8. Box will boot itself in enigma2 wizardDown you can see how to boot spark image to enigma2 and viceversa
2.4 Howto switchfromSpark to Enigma2
1.KeepPressing[OK]ButtoninFrontPanel,thenpoweronSTB.
2.After5seconds,youwillsee[Forc]inLED,release[OK]buttonandPress[Down]
buttonyouwillsee[EN16]inLED
3.Press[OK]toconfirmyourselection,STBwillrebootautomatically2.5 Howto switchfromEnigma2to spark
1.KeepPressing[OK]ButtoninFrontPanel,thenpoweronSTB.
2.After5seconds,youwillsee[Forc]inLED,release[OK]buttonandPress[UP]
buttonyouwillsee[SPAR]inLED
3.Press[OK]toconfirmyourselection,STBwillrebootautomaticallyRE: if enigma2 installed do not work with the RC go back to spark image and upgrade the latest image, then go back to e2 and Rc will work
-
Why not build a vpn of your own in vu?
Much more simple. -
I tested this image on dynavision spark and worked but no addons on line.
The best i found is PKT_GM990_E2_NEBULA_v1_Image which had addons on line.
In all these images for spark cccam is not working but you can connect with mgcamd which as i saw worked fine.
Only that on remote color buttons do not work but those of 3 rows above -
VU+ JTag Broadcom Tools
How to install After extracting the compressed file that is installer in the follow order.
BBS
1. Install Framework 4
2. Install BroadCom Studio3
3. Install BCM97325 [ Do not use setup install file ] [ VU+ SOLO ]
4. Install BCM97335 [ Do not use setup install file ] [ VU+ DUO ]
5. Install BCM97413 [ Do not use setup install file ] [ VU+ UNO/ULTIMO ]
6. Bcm USB [ Use USB Driver update ]How to run
1. Broadband Studio 3 runs
2. Select Menu => View => devices => BCM97325 [ VU+ SOLO ]
3. Select Menu => View => devices => BCM97335 [ VU+ DUO ]
4. Select Menu => View => devices => BCM97413 [ VU+ UNO/ULTIMO ]3. After turning on the STB, you can see the message 'Connected'
4. Select Flash Explorer
5. Select the Type ' K9F1G08U0A '
6. Select refresh
7. Select the update file in Browser
8. Select startHow to connect BBS
Connect the BBS as shown below
1. VU+ DUO
2. VU+ SOLO
3. VU+ UNO
4. VU+ ULTIMO
Bcm97325.zip
Bcm97335.zip
Bcm97413.zip
cfe_Duo.zip
cfe_Solo.zip
cfe_Ultimo.zip
cfe_Uno.zip
how to use BBS - SOLO_UNO_DUO_ULTIMO.pdfthanx TRR
-
-Removed beta from version name (multics is always in beta state)
-Removed Gbox Server and Radegast Server
*fixed freecccam bug
*fixed ecm request checking
*fixed and improved dcw filter
*fixed cccam card selection and uphops priority
*fixed config comment and line-continuation(\) parser
## the next 2 lines are identical
N: localhost 4444 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: localhost \ # Host
4444 \ # Port
user \ # Username
pass \ # Password
01 02 03 04 05 06 07 08 09 10 11 12 13 14 # DES key+Added oscam-cccam program detection
+Added editor in webif to edit config file.
+Changed all clients/servers actions (recv/send) to multithreads
+Added Profile Options to accept or deny zero sid/provider/caid (0:deny/1:accept).by default all are accepted
ACCEPT NULL CAID: 0 # deny all incoming ecm with zero caid (ex. 0000:032830:0180 {CAID:PROV-ID:SID} )
ACCEPT NULL SID: 0 # deny all incoming ecm with zero sid (ex. 0500:032830:0000)
ACCEPT NULL PROVIDER: 0 # deny all incoming ecm with zero provider-id (ex. 0500:000000:0180)+Added more profiles default options
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW TIME: 0
DEFAULT DCW TIMEOUT: 5500
DEFAULT DCW MAXFAILED: 10
DEFAULT SERVER MAX: 0
DEFAULT SERVER INTERVAL: 1000
DEFAULT SERVER TIMEOUT: 3500
DEFAULT SERVER VALIDECMTIME: 2000
DEFAULT RETRY NEWCAMD: 0
DEFAULT RETRY CCCAM: 0
DEFAULT CACHE TIMEOUT: 300+Added clients(cccam/mgcamd) extra info, added clients enddate thread
F: user pass { 5501 5502,5503 }
F: user pass { profiles=5501 5502,5503; } # this is the same as previous line
F: user pass { profiles=5501 5502,5503; name=My friend name; } # + full name of the client
F: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; } # + this user is only allowed to connect from the host "myfriend-host.org"
F: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; enddate=2013-04-05; } # + this user will be inactive at 6 April 2013 00:00## Predefined names are ('profiles', 'name', 'host', 'enddate') there can be added more as extra info.
F: user pass { profiles=5501 5502,5503; name=My friend name; email=friendemail@host.com }## the previous options are also available for mgcamd clients
MGUSER: user pass { profiles=5501 5502,5503; name=My friend name; host=myfriend-host.org; enddate=2013-04-05; }+Block any incoming/outgoing cache data if at least one of the next fields is zero "ecmtag,sid,caid,Hash"
+Added dcw rejected list.
BAD-DCW: FD FF FF FB FD FF FF FB FD FF FF FB FD FF FF FB
BAD-DCW: 00 01 02 03 00 01 02 03 00 01 02 03 00 01 02 03+Added "next dcw" detection algorithm to avoid the use of wrong and random dcw
Attached Files -
Best image now is the Rsi Openpli image
Get the latest kernel and image and load them separately first kernel then image.
The best one for the moment -
Jtag only in this case
-
Put there 3 one by one
-
You can install cccam in puppy in another place and bash commands are the same.
Only that it will bother You with Glibc as other linuxes do -
This firmware for smargos gives a serial number on them which you can use to bind firmly Yr working cards in oscam.
On cccam it works as 1.3 there is no cccam config to use smargo serials.
This file is tested as working by me -
here you have a workin cache section with peer inside
<cache-handler class="com.bowman.cardserv.ClusteredCache">
<cache-config>
<cw-max-age>19</cw-max-age>
<max-cache-wait>40%</max-cache-wait>
<local-port>xxxxxx</local-port>
<sync-period>0</sync-period>
<remote-host>xxx.xxx.xxx.xxx</remote-host>
<remote-port>xxxx</remote-port>
</cache-config>
</cache-handler>