Hi
Are you running just Oscam or Cccam & OScam?
Thanks
Hi
Are you running just Oscam or Cccam & OScam?
Thanks
Hi
Done that, it says Error no entitlements on the viasat card
Do I need to put back into original receiver or leave on a specific channel to update?
Thanks
Hi
Cards are in chipside down
On the status only 1 reader is showing?
Is this correct?
Thanks
Hi
Viasat card is in top slot
JSC in lower slot
I can see the N lines connecting but I have a black screen - The JSC card I checked in a Technomate 5402 and it cleared fine.
Configs as below:
CCcam
QuoteDisplay More###########################
###LINUXSAT-SUPPORT.COM####
###########################
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 34001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
Oscam Conf
QuoteDisplay More###########################
###LINUXSAT-SUPPORT.COM####
###########################
[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255
[newcamd]
key = 0102030405060708091011121314
port = 34000@093E:000000;34001@0500:42400
Oscam Server
QuoteDisplay More###########################
###LINUXSAT-SUPPORT.COM####
###########################
label = VIASAT
protocol = internal
device = /dev/sci0
emmcache = 1,3,2
group = 1
caid = 093E
ident = 093E:000000
[reader]
label = JSC
protocol = internal
device = /dev/sci1
emmcache = 1,3,2
group = 2
caid = 0500
ident = 0500:42400
Oscam User
QuoteDisplay More###########################
###LINUXSAT-SUPPORT.COM####
###########################
[account]
user = linuxsat
pwd = support
monlevel = 0
uniq = 0
group = 1
au = VIASAT
caid = 093E
ident = 093E:000000
[account]
user = linuxsat1
pwd = support1
monlevel = 0
uniq = 0
group = 2
au = JSC
caid = 0500
ident = 0500:42400
Where am I going wrong?
Thanks
Hi
I have entered this but card reader 1 does not seem to be reading the card - or at least in cccam info I see no EMM or no ECMs:
Cccam config
QuoteDisplay More
READER PATH : /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci1 8000000
CAMKEY : /dev/sci1 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EMM THREADS : 1
SERVER LISTEN PORT : 24786
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :pwd
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :pwd
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :pwd
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : no
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
N: 127.0.0.1 34001 root pwd 23000
Oscam conf:
QuoteDisplay Moreglobal]
usrfile = /emu/log/oscamuser.log
logfile = /var/log/oscam.log
disablelog = 0
disableuserfile = 1
fallbacktimeout = 2500
nice = -1
maxlogsize = 200
preferlocalcards = 1
saveinithistory = 1
[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 0
monlevel = 0
appendchaninfo = 0
[newcamd]
port = 44445@093E:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
[cccam]
port = 24786
reshare = 9
ignorereshare = 0
version = 2.1.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
[webif]
httpport = 8080
httpuser = root
httppwd = pwd
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.xx
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
Oscam server file:
QuoteDisplay More
[reader]
Label = Viasat
enable = 1
Protocol = internal
Device = /dev/sci0
services =
reconnecttimeout = 30
CAID = 093E
ident = 093E:000000
Group = 1
EMMCache = 1,3,2
ecmcache = 1
blockemm-unknown = 1
lb_weight = 100
audisabled = 1
BoxID = 0XXXXXXX
blockemm-g =1
Oscam user file
QuoteDisplay More[account]
monlevel = 0
uniq = 0
[account]
user = root
pwd = pwd
group = 1
au = viasat
caid = 093E
ident = 093E:000000
cccreshare = 10
Have I missed something silly?
Thanks
Hi
Thanks for that.
So do i need to download Oscam 6059 or do I just need the config?
Thanks
Hi
Here's hoping someone can help over a few queries on the Vu Duo
1) Can I use a viasat card in the internal reader?
Do i need to overclock it to 357?
Am i best using an omnikey?
If so what configuration do I need?
2) Do I need to use Oscam to read / share the viasat card?
I have downloaded Oscamv6408 & Cccam 2.13
I need a solution to try to read a JSC card in the other card reader.
3) Can I use Oscam to read / share a JSC I***** card?
Do I need to overclock?
Has anyone got a working configuration
Thank you for reading and any help will be most welcome.
Thanks
Hi
I have a similar problem.
My Canal Sweden card has not updated for February.
Always worked fine in my DM800 with Cccam 2.21
Never had a problem except for this month
Tried it in a TM5400 & TM5402 and the card didnt update.
I have now got a VU DUo and still no joy
All help appreciated
Thanks