Posts by cazuela

TELNET

opkg update

then try a reinstall or install these dependencies..
[DOWNLOAD] Dependency Needed For Mediaportal mips32el

It would be difficult if not next to impossible to recieve 0.8W and 13E. on same dish..the angle arc is too far apart for a flatdish..
That is why I suggested the diseqc switch which runs the cables from different LNBs to one diseqc switch cable connected to the STB...
it automatically switches from one sat to the other depending on which channel you wish to view..

Nonetheless it is a well built very reliable motor and hasn´t let me down once despite living on the coast..
One thing though is make sure you cover the F connectors with rubber band or similar to weatherproof the connections..

Check this out from the sponsor:

Quote

This switch enables switching between 4 LNB's on one satellite dish or separate satellite dishes into one receiver.

This switch is made with high quality items and as been individually tested by the manufacture. It is suitable for both indoors or outdoors installation.

This is a High Performance and is HDTV DVB-S2 Compliant DiSEqC Switch.

Read down the linked page to get an idea of connections
Technomate TM-4S DISEqC 4 Way Switch

Although this would mean occupying a lot of wall space with so many dishes..so why not simply look for a motor/dish combination which you can find on sponsor´s site too!!

Quote from vito

After all, this problem was very simple to solve. Sorry for all the bother and thank you all for your support. It was just a peer problem!. I am very embarrassed.

That is usually the first port of call ( forgive the pun)

Quote

All these channels are opening with the latest Catseye settings..
so it could be down to the source..

Surely you have other peers to open from, however,
Point is it´s a lesson learnt..
thread closed

Quote from Paul_B

A friend of mine has about 20 ANALOGUE channels coming into his house from a coax cable. Is it possible to get a cable line working with this Analogue feed?

When I do a cable network scan on the TV I can see lots of different channels but they are all encrypted??

The obvious answer is ask your friend what he has setup to open these "analogue" channels.Are you sure they aren´t freesat or the likes??
Please upload the channel list here and let us know what/how the setup is..( bearing in mind the site rules)

it would have been better to simply upload it here...

A factory reset is exactly what it states..a reset to factory,, not to third party team images...
Therefore to try avoid all this( which in fact will be the fastest way in the long run) go into menu-settings/setup - and check screen configuration ,etc..
To find any old links ,etc, use the searchbar top right corner of this page, although I can´t find any of your older posts either..!!
Another good idea is to save backups along the way in case any more "cockups"..

Quote from alata

Is this version supports Arabic Language subtitle

You need to be more precise..
Subtitles for what exactly¿?
generally speaking there are feeds/plugins, etc available..

The IPKs found on our Addons are made by different members of the team who have their own particular ways of creating the IPKs
and what is ( or not) included in the creation...
in this particular case, neither the removal nor the restart were included.
But , all work in the same manner for the same purpose.

And you still haven´t answered the question :

Quote

have you the card yourself or shares from a peer ?

This isn´t being nosey, it´s to eliminate other possibilities/probabilities..
The more info you give the sooner you find a solution...
All these channels are opening with the latest Catseye settings..
so it could be down to the source..

Impossible for me to get the download ,,, but i can see it clearly states ANDROID_IPTVEPG..
so you need an android device or smart android TV...

Strange that you should be having problems after 4 years on the site..
This is usually down to the browser you are using... IE..
try with chrome or Firefox and you shouldn´t have any problems..

Quote

That catseye ipk hasnt got the satellite.xml included.

Yes , it most certainly does have a sat.xml, cable.xml and terrestrial.xml...
it was created for astra 28.2ºE only and is dated from the 5th Feb from Catseye himself...
it sounds like you are missing some very important steps if you cannot see TV3,etc in ROI bouquet
as I have just tested the IPK myself and it´s working as it should..

Quote from viadine

Do I need to do anything to file (open it etc), because I have tried for ages and having no luck

try on the remote control - GREEN-YELLOW - manually install ipk package.
full restart of box.
go to menu-plugins and you should find whatever you have installed..

Quote from spirosrma

This is the worst image i have ever seen lags everytime not fast at all. Lags even in channel selection. I will stick with openatv this one is a fail

That´s a fantastic introduction to fellow users bud, thanks for sharing your opinion..
However I imagine that if the uploader had thought the same ,he wouldn´t have bothered wasting his time with all that it takes to be able to share....

With latest caseye settings ,they are opening again,,so more than likely it was PId change..
Install this IPK for catseye astra 28.2 and it will work ..

why would you want to add a smarttv app to a VU+ , even if it existed, bud ??

on the STB , go to MENU--PLUGINS- HDMICEC.. and disable it, restart STB and check..

After trying everything else, can´t see anything left to do except compare SID; PID, of frequency on kingofsat ( link is found on top navbar )
Have you got another STB to connect and compare?