Posts by cazuela

{0:0:3} THIS IS WRONG ...you?re not respecting the spacings... this should be { 0:0:3 }
scooby passes this to dave: C: scooby.xxxx.xxxx port daveangel inventedpass
scooby adds to his config: F: daveangel inventedpass
dave passes this to scooby : C: daveangel.xxxxx.xxx port scooby inventedpass
and dave adds to his config: F: scooby inventedpass
after this initial introduction when you see each other ,scooby puts F: daveangel inventedpass 2 0 0 { 0:0:3 }{}{}daveangel.xxxx.xxxx
dave puts : F: scooby inventedpass 2 0 0 { 0:0:3 }{}{}scooby.xxxx.xxxx
I suggest you look at the actual lines in your respective .cfg as sometimes cline manager goes awol.......
scooby ,,any doubts ,you know how to catch me ;)

try this out: place each others lines at the top of each others list in .cfg ... it works for some but not all but worth a try...

CCcam protocol uses BOTH,,,as it uses more resources than gbox/mbox...hence.. to keep it stabilized...so BOTH TCP + UDP....
remember you are directing all traffic through one open port unlike mbox/gbox which uses diferent ports per xx amount of peers to keep it stable..
caz

http://linuxsat-shares.com/car…scussion/770-udp-tcp.html
enough said.... ;)

freezes???? not even a glitch ,,,,,not in sbo sd at least... ;)

Quote from dream500

With a SNR of 85 - 89% and quality of 83 - 90% I'd be more than happy with that. By the way, where are you located?

I obviously missed this info?in which post did he mention this??
Signal Noise Rate :85-89%
Automatic Gain Control : 6%
Bit Error Rate : ???????
he didn?t mention.. ? or did he??

the yellow is either not updated because it working through an Emu softkey and hasn?t bothered to update the key or its an old card..check the version of said card ;) caz

I did already and with her sister too!! her mum wasn?t available at the time of going to press!!!!

i noticed some times that if i have reset my channels list ( i.e. using dreamset )and not restarted the box ,,
then AGC will drop to nearly 0% draining all the power from the box to the lnb when turning the motor..
maybe this is obvious for you but might as well let others with similar ( or not) know too!!
;) caz

Quote from daveangel

?180 ish, but watch out for the tuner mod state as earlier box's sell cheaper ?160??

ps, you can always add another usb tuner later or so i have read...dvb-t?

from the dm600 on you have the option to add a Cable or Dvbt or anotherSatellite tuner for another 40€/50€
As we have 30+ DVB-T channels here ( spain) now ,,there isnt a DM800 without a stick.it?s the cheapest way.( dvb-t stick@ 20€)
I have one setup via laptop with my DM500+s server,very handy for dvbt premium channels...
caz ;)

the fights PLUS the good company in the chatbox !!!!! my thanks to ALL !!!!

to see on tv
just to add:
in your .cfg file you will see this:
SHOW EXTENEDED CLIENT INFO : yes
SHOW TIMING : yes
MINI OSD : yes
ZAP OSD TIME : 3
I suggest you try it out if you want to see the timing on your tv ;)

Quote from manic

i am a dish installer, i do dm programming, and you believe i could'nt change batteries before i post my problem???? ::)) lol!!! anyway..... the link is ok....will test this....thanks...

Ok ;) of course if you had introduced yourself in introductions previously ,, we would have known that you are a dish installer ,etc.....
caz ;)

same here martin,,picking up a bit of polish meanwhile,,lol

ALTERNATIVE: POLSAT SPORT hotbird 13? - freq: 11157 VERTICAL- 27500 5/6 in polish ,but you can always put on the radio..... Macklin v Veron at the mo...

Lads,,, I?m in the north of spain and am recieving all box office at : SNR: 94%-AGC 90% -BER 0%...so it?s either the image or your freqs...
manually add the freq 11507 HORIZONTAL running @27500 fec 2/3.....OR download the most recent vhannibal settings to include 28? and you?ll see the channel,,,, another thing is loss of signal ,,it is in HORIZONTAL not vertical..... at the mo.. can?t think of any other possibilty,,so get scanning manually,,,,,
edit. hust thought of something ,,it?s announced in kingofsat as 11508 H ,
,but I?m reading from my DM @ freq 11507 HORIZONTAL running @27500 fec 2/3

Daic! -try this out in the meanwhile ,could be your "eyes" whilst up there:
http://linuxsat-shares.com/too…entate-dish.html#post3110
caz ;)

read this from TEN?S problem ,,could be worth a look at: http://linuxsat-shares.com/dm8…e-Problem-Fixed=#post2021
OR CHANGE THE BATTERIES!!!!!!
caz ;)

CHANNEL 743 CHANNEL 739HD -not sure which of these transponders matches these below:
Astra 2D (28.2E) - 10921.00 H - Txp: 55 - Beam: Astra 2D DVB-S (QPSK) - 22000 5/6
Eurobird 1 (28.2E) - 11508.00 H - Txp: D3S - Beam: Steerable 1 DVB-S (QPSK) - 27500 2/3
Eurobird 1 (28.2E) - 11565.00 V - Txp: D6 - Beam: Steerable 1 DVB-S (QPSK) - 27500 2/3
Eurobird 1 (28.2E) - 11603.85 V - Txp: D8 - Beam: Steerable 1 DVB-S (QPSK) - 27500 2/3
Astra 2A (28.2E) - 11914.00 H - Txp: 11 - Beam: Astra 2A North DVB-S (QPSK) - 27500 2/3
Astra 2A (28.2E) - 11934.00 V - Txp: 12 - Beam: Astra 2A North DVB-S (QPSK) - 27500 2/3
HD1 + 2 : Astra 2B (28.2E) - 12363.00 V - Txp: 34 - Beam: Astra 2B South DVB-S2 (QPSK) - 29500 3/4
any probs not picking up transponders
-go to MNEU-SETUP- SERVICE SEARCHING -TRANSPONDER EDIT..
other boxes , like mine, may have satellite BINDSCAN..which will scan every possible frequency but this takes forever........so the first option I reckon is the quickest,maybe next time have it prepared by using dreamset to set up the frequencies/channels ; caz

NOTE : Just found the frequency: 11507 H 27500 2/3
UPDATEfrom "other sources"....
Probably a good time to give you a rundown of scheduled times tonight...GMT TIMES:(CET TIMES+1)
8pm - Brook v Kotey
9pm - Macklin v Varon
10pm - Cleverly v Mohammedi
11pm - Smith v DeGale
1.30pm - Guzman v Davis
2.30pm - Ortiz v Peterson
After 3 -Khan v Maidana