My dear brother / Mohamed Al-Safti (angel_heart)
After Greetings
If you please, can show me the location of version 5.1 for processor 7162, so that I can not try it, or if you can upload it here,
I will be grateful for your favors.
Posts by ahmed gazye
-
-
Display More
شكرا جزيلا يا اخ احمد
Yes I managed to install image enigma2 for spark 7111 on external flash amiko alien2. I tried
OPenPLi_10.2-SPARK 7111 30.10.2020.zip
but no success.
Bu after many tries of renaming enigma2 I fond two rules when naming enigma2:
1. there can't be any spaces in the name enigma2 and before installing enigma2 enter the exact name of enigma2.
2. underscore must be before the last word and not the dash.
Rule about the installing process is in case we get an error we need to delete that installation and MUST restart receiver before we try to install enigma2 with correct name. This is how the name is suposed to be:
OPenPLi_10.2-SPARK7111_30.10.2020.zip
Before installing the new, you must delete the old one & restart receiver
go to the plugin
TO delete the old stand on the name
Click yellow remote control button
-
Thanks for the information you gave bro, but it is difficult for me to do these because I don't have a pc
There is another method via the mobile phone, but I have not used it before, so wait for one of the brothers who use this method, I think the brother / abdulrois & angel_heart & bilalHD
To explain to you the method and give you the program for that
-
How are we going to put those files into the etc folder without the controller functioning?
Using the DCC program Move & change lircd.conf extension etc
Then via Telnet gave this commandCodereboot -
sorry, it looks like nothing has changed but has been upgraded ??? there is no wlan or wifi embedded and lircd.conf remote is still always for manual input
Dear brother / abdulrois
I haven't installed the version on my device yet the problem has become an easy solution Available by topic and solution You can also use my topic at the following link
Most Drivers Wireless & kernel-module enigma2 system in Spark devices extension ipk
-
The best and easiest way to repair the USB flash drive (new software) using the MiniTool program
There have been many lately recent problems with Flash Memory
Flash Memory work and you receive a message requesting the work of formate have consistently, and their inability to store data, so we will learn today In an easy and distinctive way, it is considered as a new flash memory software and reproduce it as if it is completely new
All that we need in order to repair the defective flash memory or that has software problems is the MiniTool Partition Wizard
You can download the program from my topic in the forum at the following link
Now we will connect USB flash drive to the computer
Now we choose the flash memory and stand on it with the mouse and press right click to show us a list from which
we choose the command
Delete All Partitions
After deleting the flash drive, we will now create a new software for it by recreating it again, so we click on the USB tab as shown in the image
and choose from the list the first option,
Rebuild MBR
We stand with the mouse on the word Unallocated in the yellow bar and click right and choose from the list the first option,
Create
We take the last step in creating a new software for the flash by doing a reformatting of it and formatting
by standing on the flash icon and choose from the list the first option,
format
This is a picture of the memory stick that had a problem after resetting it and creating software
for it through the MiniTool program
We got to know about the easiest and best way to repair the flash memory by creating a new software for it,
using the MiniTool program
MiniTool Partition Wizard v12_1 Technician_Portable.rar
-
شكرا يا اخ احمد
Installing enigma2 images for spark7162 on extrrnal flash amiko alien 2 is ok.
Installing enigma2 images for spark7111 on external flash amiko alien 2 error:
IOError: [Errno 2] No such file or directory:
' /media/nfr4xboot/NFR4XBootI/Spark7111Openpli10/etc/fstab.tmp
You installed a image with a wrong name, for example the version should be like this by extension .zip
BlackHole-3.0.2-spark-20160413.zip
Your image must be with this name
OPenPLi_10.2-SPARK 7111 30.10.2020.zip
Try again with the correct name
For your information, sometimes the process does not succeed from the first time For any reason, re-install it againafter deleting the wrong version
-
My friends
You can knowing how to install the NFR4XBoot plugin of opennfr-6-5 to install Enigma2 Image on the external flashMy topic is related to Spark devices, but the method is the about for the rest of the devices
install Enigma2 Image on the external flash by Plugin Nfr4X Multiboot of opennfr in Spark Devices
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r313-spark 7162 _usb.zip & tar.gz
https://runigma.com.ua/feeds/i…3-spark7162.rootfs.tar.gz
https://runigma.com.ua/feeds/i….2-r313-spark7162_usb.zip
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r313-spark_usb.zip & tar.gz
https://runigma.com.ua/feeds/i…-r313-spark.rootfs.tar.gz
https://runigma.com.ua/feeds/i…2-10.2-r313-spark_usb.zip
-
Dear friends
We thank brother / Mohamed Al-Safti
To Complete the topic for those who love the try, I attach herewith program / Easy Python Decompiler v1.3.2
-
dear brother / Mohamed Al-Safti
thousand thanks for your wonderful first topic in the forum
Your ability to modify the plugin is amazing , God willing, you will soon be an excellent Coder
Good luck, I wish you continued progress and advancement for the better always.
-
Thanks Mr. Ahmed great work as usually , we learn all the time from your experience .
Thanks and we Waiting for your wonderful topic about modifying the plugin, do not be late, dear brother
-
Dear bro Ahmed is there a guide how to install images on external flash with plugin NFR4X Multiboot?
I installed opennfr image on internal flash of Amiko Alien 2 and i particioned usb flash to 4 partitions from which is 3 partitions ext4 1GB sized one partition fat32 5GB sized an I put zipped image on partition fat32. Do I put this usb flash on front usb port or rear usb port of the receiver?
Wait for a topic to be prepared with pictures to fully explain the method so that all friends can benefit
Go to my topic
install Enigma2 Image on the external flash by Plugin Nfr4X Multiboot of opennfr in Spark Devices
-
install Enigma2 Image on the external flash by Plugin Nfr4X Multiboot of opennfr in Spark Devices
preface
We all know that support for Spark 7111 is greater than support for Spark 7162 devices, and therefore you will find more
images of Spark 7111 devices than available for Spark 7162 devices. So the only solution available for owners of Spark 7162
devices to benefit from this support is to work on external flash by plugin Nfr4X Multiboot of opennfr Because it is the only
plugin that can install images of the 7111 processor on the boxes that holds the 7162 processor
But the owners of the processor 7111 will also benefit from the topic because we presenting them with another plugin to install images on the external flash drive
The plung NFR4X Multiboot works on the opennfr image without problems and install images with the extension img.zip
compressed with the same extension, that is, you do not unzip so you can install the image opennfr on the Internal flash of device to work this plugin Nfr4X Multiboot
If you want to know how to do that, return to my topic in the forum at the following link
If you do not have opennfr image for your device, you can refer to my topics in the forum on the following links to obtain
them and we have2 images for each device despite the team's stopping support for Spark devices and here you must give
thanks to the wonderful artist friend / ahmedmoselhi Who built the new version 6.5 has a thousand thanks
images for 7111 processor
OpenNFR 5.3/ Gstreamer 1.8.0 For GM SparkReloaded Sti/7111
images for 7162 processor
The latest version of opennfr-5.3-sparktriplex-20160530_usb for spark sti 7162
Yes, you can not split the flash drive ( usb) , but it is better to do so you are not exposed to future risks But that is not our
topic now you can to split your external flash with any program you like, and to which number you prefer a search that is one of the Partition Swap Fat 32 And the rest of Partition ext2.ext3.ext4 according to the amount of each program
You can split the flash drive with one of the following programs and download it through my posts on the following links
createmini / You can split the flash with a maximum of 8 equal or different parts with an extension ext2
You can refer to my topic in the forum to know more about it and download it on the following link
CreateMini program To split external flash for MultiBoot
admin-tool-morly-v2-4-4-1 / You can split the flash with a maximum of 14 equal parts with an extension ext3
You can refer to my topic in the forum to know more about it and download it on the following link
minitool-partition-wizard- You can split the flash Multiple equal or different parts with an extension Multiple But it needs
some experienceYou can refer to my topic in the forum to know more about it and download it on the following link
MiniTool Partition Wizard Technician 11.6 Portable
You are now ready to work on your receiver, insert the usb into the receiver on front usb port or rear usb port of the receiver The two are working
Go to
Mainmenu > setup > storage devices > initialization
Then the name of the flash disk will appear ok
red button ok
waiting for the process to finish
This step is followed by whoever split his flash extension ext2 .ext3
Go back to press
Mainmenu > setup > storage devices > convert ext3 filesystem to ext4 OK
Then the name of the flash disk will appear ok
red button ok
waiting for the process to finish
Go back to press
Mainmenu > NFR4X MultiBoot red button ok
to install the NFR4XBoot plugin on the flash disk
waiting for the device to reboot
Congratulations
The NFR4XBoot plugin has been successfully installed on the flash disk
b623144d84597557.jpgTime to work on p.c to transfer the raw image or backup to be installed on your device
by DCC program after setting the correct IP address for your device
send the images or backup to be installed on the external flash,
send all image or backup to install in the track
MEDIA / HDD / NFR4XBOOTUPLOAD
Now we go back to the device and go to the plugin and press the green button to install image or backup
press the green button
press ok
first choice / copy settings to the new image if no
does not install special settings for open nfr installed on the internal flash
choose the first option to install the images if yes
does install special settings for open nfr installed on the internal flash
that It is installing the image like a backup
But no, it is best to avoid problems with the installation
then press the green button
The installation process is in progress
waiting for the process to finish & device reboot To cross the new image
the new image
all the image installed on the external flash appear in order to move through it to all images.
Just stand on the name of the version that you want To boot press the red button on the remote,
then OK, the device will immediately boot the selected version
See plugin jobs Easy color for every job
The red remote control button > boot image
The green remote control button > install image
The yellow remote control button > remove image
The blue remote control button > uninstall plugin
Notice plugin in the new image is static, so it is not possible to install imagess or delete them
except through the plugin installed on opennfr
-
Remote control does not work
This topic has become a normal procedure that has been written more than once
If remote not working The problem was solved with a change lircd.conf extension etc (With attachments)
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r310-spark_usb.zip
https://download1082.mediafire…2-10.2-r310-spark_usb.zip
-
My friends
openvision-enigma2-develop-extralanguage-gstreamer-10.2-r310-spark 7162 _usb.zip
https://download1649.mediafire….2-r310-spark7162_usb.zip
-
Dear bro Ahmed is there a guide how to install images on external flash with plugin NFR4X Multiboot?
I installed opennfr image on internal flash of Amiko Alien 2 and i particioned usb flash to 4 partitions from which is 3 partitions ext4 1GB sized one partition fat32 5GB sized an I put zipped image on partition fat32. Do I put this usb flash on front usb port or rear usb port of the receiver?
Wait for a topic to be prepared with pictures to fully explain the method so that all friends can benefit
-
link the raw version https://drive.google.com/file/…kuHIGamOg1hVND0Ccbf4/view
I would like to thank our friend / sun35
He presented us with the latest link raw version
