Good, Ahmed!
How did you overcome the original problem?
Unzip ipk by 7z or tar.gz & add it by program DCC
to the following path
usr /lib/ engima2 / python / Plugin / extensions
Then restart your Reciver
Posts by ahmed gazye
-
-
i have star track 2020plus 7162 can i help u by installing this image and give you log ?? ahmed bro and red
Read here
Display MoreDisplay MoreThanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes
Advice to friends
The best version that works so far is the compiling version from our great friend BarviX Until the image team as promised to fix it fully, as the version still has the same problems even with the new version Accordingly, the new will not be published and the topic will be closed temporarily until the correction is completed -
Well Ahmed my Swenglish can be somewhat confusing also ;)
I will contact my friend and see if i can get a copy of his script. Its pretty amazing you dont even need to have the plugin installed
Script is downloading all it needs from the git ;)
It would be great if you can get us a copy of your friend's script, seagen!
ahmed gazye meanwhile you can contact freeserver owner and ask him to modify his plugin if possible.
Dear friends
I really have no problem right now everything works in image PurE2
Plugin bring many free servers and re-written servers files and it works in an excellent way in image PurE2
Why do I ask to modify it
-
Well Ahmed my Swenglish can be somewhat confusing also ;)
I will contact my friend and see if i can get a copy of his script. Its pretty amazing you dont even need to have the plugin installed
Script is downloading all it needs from the git ;)
Dear friends / seagen
I really have no problem right now everything works in image PurE2
Once again a thousand thanks for your time, help and advice
-
-
My friend telo 2002 do you have an amiko alien 2 and does it have a spark 1.2.83 on it? If so, is there a boot to enigma2 option in the spark setting?
topic is subject matter openvision-enigma2
There is no need to open another topic which you can ask about it in the subject matter amiko alien 2 spark 1.2.83For your information, I think this option is not available in amiko alien 2 spark 1.2.83
To organize and to benefit all members of the topics
-
Display More
Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
I installed the version on my device that has the processor 7162 on the external flash
using the plugin Nfr4X Multiboot of opennfr-5.3
The copy is wonderful. Everything works with it. All thanks and appreciation to our wonderful friend Barvix
To pass through the version after installation, you must be patient. The process takes 3 to 5 minutes
Advice to friends
The best version that works so far is the compiling version from our great friend BarviX Until the image team as promised to fix it fully, as the version still has the same problems even with the new version Accordingly, the new will not be published and the topic will be closed temporarily until the correction is completed -
Display More
openvision-enigma2-develop-extralanguage-gstreamer-python2-10.2-r268-spark_usb
Thanks to our wonderful friend / BarviX
We wish you your active and continuous participation in the forum with all of your experiences and knowledge in this field, so do not skimp on your brothers with it
Please thank our dear friend / BarviX for compiling this image & try it
openvision-enigma2-develop-10.2-r268-spark
We await another copy for our friends who have a 7162 processor
Advice to friends
The best version that works so far is the compiling version from our great friend BarviX Until the image team as promised to fix it fully, as the version still has the same problems even with the new version Accordingly, the new will not be published and the topic will be closed temporarily until the correction is completed -
I guess I told you why... but if you can't hear me... :(
i hear you good & Answered to benefit from what it offers us
to take what is in it and put it in OSCam The plugin must be installed on another copy, then transfer the lines of the servers from the emus server file to the same files on the PurE2 is a long process
-
Soon, my brother Ahmed, I will make her a cape
I got plugin enigma2-plugin-extensions-freeserver_7.0.8 right on the version after unzipping it and transferring it by program dcc and it works par excellence
-
Display More
I can't see a legitimate reason why would such a plugin change crucial components of PurE2.
So, I would say that the correct way to deal with it is to ditch such a plugin...
I mean, to change a whole PurE2 because of some aggressive plugin?
Why not take what is in it and put it in your OSCam instead...?
Plugin bring many free servers and re-written servers files to Most important emus In addition to other functions and as long as we can deal with it in a correct way without damaging the copy, why should we leave it and not benefit from what it offers us?
-
Amico Ahmed dal 12 ottobre c'è stato questo problema che il freeserver versione 7.0.8 non ha accettato, ma nessuno ha risposto al mio msg, solo la versione 7.0.4 va, saluti
I got them right on the version after unzipping it and transferring it by program dcc and it works par excellence
-
my friends did any of the members install spark version 1.2.83 on the amiko alien 2 and does the spark have the option to Cross over it from the system> bisic setting> factory defauit> boot to E2? also can it with enigma 2 from DuckBA-e2 plugin when select spark spark bot on spark? My amiko alien 2 is on spark 1.2.61 and there is no option to Cross over it from the system> bisic setting> factory default> boot to E2. so i can't boot from spark to enigma2 that way but i do it with the hardware on / off buttons and ok. On enigma two with DuckBA-e2 I can select spark system after that plugin configuring image ... spark detected :) writing bootargs ... Cannot access MTD device / dev / mtd7: No such file or directory Error: environment not initialized error writing bootarges >>>> ERROR !!! Press OK to close. After that I select enigma2 and the DuckBA-e2 plugin does it completely. Boot E2 / N in NAND. Configuring image ... Active partition: ''. Restarting current soft from NAND. >>>> Press OK button to rebot box. Is it expedient to update to spark 1.2.83 if these two options of easy switching from spark to enigma 2 and vice versa don't work on that version of spark either? If the update to spark1.2.83 fails, can I restore at least this spark 1.2.61? Can I back up the current spark? I am asking for your advice for these doubts of mine and I thank you in advance.
First, I do not own the amiko alien 2 device. My device is Truman Spark 7162, and its latest update has a option boot to Enigma, which is version 1.2.86. This is not available for your device, I think, and version 1.2.86 of the Truman device is not suitable for your device. The modernization process is your decision only, but you can return from the new update to the old and vice versa, but you must have the necessary experience to deal with situations, or leave things as they are.
-
But just said they are creating problems and PurE2 is not working...
So, if some of them are changing libs, you may have problems, as PurE2 will no longer be as intended....
Ergo, once again, if you are having problems with such plugins - do NOT install them... simple but effective...
If you can get to the origin of the problem and deal with it in a correct way so that it does not affect the version if there is no problem and since the plugin is wonderful and provides us with effective and important things
-
So, don't install these bad apples, m8....
These are not bad apples, but wonderful apples, and I got them right on the version after unzipping it and transferring it by program dcc and it works par excellence
-
I installed the new version 5/12/2020 on my device spark processor 7162 on the external flash
using the plugin enigma2-plugin-extensions-imagemanager_2.5.5_sh4
The copy is wonderful. All thanks and appreciation to the wonderful team
But my advice is not to install the plugin enigma2-plugin-extensions-freeserver_7.0.8 with the ipk extension because it leads to many changes in the system, which leads to it Box stuck and the collapse of the version
This is what happened to me more than once, now and before
Here shows the number of flashes that I am working on for external copies, 2 external flashes
bootlogo PurE2 1920x1080 by oktus
-
I installed the new version 5/12/2020 on my device spark processor 7162 on the external flash
using the plugin enigma2-plugin-extensions-imagemanager_2.5.5_sh4
The copy is wonderful. All thanks and appreciation to the wonderful team
But my advice is not to install the plugin enigma2-plugin-extensions-freeserver_7.0.8with the ipk extension because it leads to many changes in the system, which leads to it Box stuck and the collapse of the version
This is what happened to me more than once, now and before
Here shows the number of flashes that I am working on for external copies, 2 external flashes
bootlogo PurE2 1920x1080 by oktus
-
I installed the new version 5/12/2020 on my device spark processor 7162 on the external flash
using the enigma2-plugin-extensions-imagemanager_2.5.5_sh4
The copy is wonderful. All thanks and appreciation to the wonderful team
But my advice is not to install the plugin enigma2-plugin-extensions-freeserver_7.0.8 with the ipk extension because it leads to many changes in the system, which leads to it Box stuck and the collapse of the version
This is what happened to me more than once, now and before
Here shows the number of flashes that I am working on for external copies, 2 external flashes
bootlogo PurE2 1920x1080 by oktus
-
Spark on my amiko alien 2 triplex is 1.2.61, what is latest spark image for it and link please.
AMIKO_ALIEN2_1.2.83_app for spark sti 7162
link
-
As usual, the team did not mention the new in version and I did not install it on my device
