QuoteI would go with ViX Sisyphus.....
@mckee: Compelling argument, but it sounds a bit too much like syphilis for my liking :laugh:
QuoteI would go with ViX Sisyphus.....
@mckee: Compelling argument, but it sounds a bit too much like syphilis for my liking :laugh:
Just seen this thread and to be honest all attempts to rid this hobby & our forum of payserver parasites should be welcomed..
I am not 100% sure that normal joe's are going to fork out $$$ for your m8's services which leads me to believe that the only people who would find your m8's services viable are dealers that bought bulk lines to sell as gifts with there box's (Who else is gona pay to track down €100 or so, especially when they payed fully aware that it was for an illegal service)
In my opinion those box dealers are as bad & deserve it every bit as much as the payservers..
One way or another, flushing out all these rats is a good thing but lets not get confused thinking that there are any innocent punters here because I don't have much pitty for people buying gifts or clines..
If these hungry payserver B@stards did not have a flood of suckers waiting to buy, they would not exist!!!
Any long term member of this site need not come whining about getting ripped off with a gift because there will be Zero sympathy & most likely a warning for being an idiot & supporting payservers.
That is not to say that you cannot report a payserver to any staff member, this is most certainly welcomed & and we will follow up every report..
QuoteHi Great Guide especially for a newbie like me but unfortunately help is needed Have completed Ubuntu install and CCcam and oscam but when I put my servers ip address in internet explorer I was just get connecting message just had an update on windows to IE 11 and now it just shows bing results ???
Thanks
You will need to use:
ip_address:webif_port_no
e.g.
192.168.1.100:8888
QuoteSorry if this sounds dumb but is this loss of channels only for those card sharing? I'm only using my own Sly subscription card in my VU+ Duo 2 box. The card is paired with my Thompson box that had component outputs on it.
I'm sure you can answer this question yourself m8, can you clear any of the channels in post #2 on your VU+ Duo2
QuoteCan any of the mods or administrators tell me who their target readership for this forum is?
I am relatively new to STB's but am keen to find out as much as I can. I really like having Linux running on my STB so I imagined that LINUXSAT support would be an ideal place to find out about my new passtime as I run LINUX on a SATellite receiver and am in need of suport....
But it seems like this support is only provided on specific systems but it doesn't mention anywhere in the rules
which systems are supported although I'm told that a Vu+ Solo clone which I hsve is not supported
As mentioned above, there is no support for VU+ Clones because of our arrangement with our sponsor but you will find plenty of support for Linux..
Quotewell who ever created the title was just scaremongering because this was not a corrupt bootloader, as i said if the bootloader had become corrupted only a J-TAG would have resurrected the receiver.
I did not name this thread but I have renamed it as the original title (in hindsight) seems inaccurate..
QuoteDont care what anyone says including yourself mr pheonix...i updated my vu duo1 to helios 011 and the bootloader on my box became corrupted...constant reboot even in standby which i realized when my timers were constantly trying to record and fail!...i actually thought my box had popped a cap but luckily it was just a case of a bootloader reflash..back to open pli again fook dat crap.
I think you might have just been unlucky m8, I updated my solo2 & duo1 from 10 to 11 without a hickup & just now updated them both to 13 & all went smoothly also..
Did you by any chance make the manual changes to get 4OD to work with ondemand? If so I wonder if that could have caused the glitch?
I only ask because I made the manual changes but all was not well with duo1 but I reflashed 10 before I updated to 11..
TF
QuoteOverclocking OMNIKEY CardMan 3021 USB on ubuntu.
how much overclocking is possible on these cards readers? OMNIKEY CardMan 3021
it is possible to get even lower ecm time without destroying cards?
Do these settings currently in oscam:
Cardman 3021 cant be overclocked m8
So this will surfice..
[reader]
label = conax
protocol = pcsc
device = 0
caid = 0B00
detect = cd
ident = 0B00:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
[COLOR='#FF0000']blockemm-u = 1[/COLOR]
blockemm-g = 1
[reader]
label = nds
protocol = pcsc
device = 1
caid = 093E
boxid = xxxxxxxx
detect = cd
ident = 093E:000000
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
Display More
Also m8, not familiar with the conax card but you are blocking unique EMMs, is that correct?
special version of oscam needed i believe...non public...work same as N*** 13E .Some people have also mentioned cachexx
No doubt there will be a special version of some cam needed as none of them work now :laugh:
Also, Cache-EX is only an exchange of ecms so it is no use what so ever in this situation as there are no real ecm's being sent to Cache-EX.
What is a professional card sharer, is it a payserver?
Off topic but Good point, you don't often see "professional" & "sharer" in the same sentence in this hobby. Lol, very funny contradiction of terms..
More positive news today its out if people look for it don't want to post it on site has we all know that u know who is monitoring forums why help them as the jam said going under ground .its the way forward no more eBay sellers
If this positive news is being kept off the net (as u say) then how exactly do you expect people to look for it? If indeed you did find the story on the net, then post it as its no secret.. And if it was (as you also say) underground then we would have to assume that someone trusted you with info and you then posted it on open forum:laugh:
Either way, this seems a pretty hollow story from the scraps you have been feeding us.. Please feel free to expand on it..
yeah m8, i knew it was possible with a monster dish, but 90cm seems a bit optimistic..
I would be divorced if I tried to setup a 1.8m, lol
Can anyone confirm signal on a smaller dish?
Is this Eutelsat 7 West A?
kingofsat - Eutelsat 7 West A
I thought that was completely out of range in UK/Ireland?
According to purplesat.com signal can be locked with 90cm dish in South east of Ireland.. Very interesting
Very strange because I thought it was the format of the CW that had changed for those channels, so no rolling out, Instant for all
QuoteStill working here today fine as is *** living hd too
Are you saying that NatGeoWild HD (0963:0F2D) & SlyLiving HD (0963:0F1A) are clearing in a cam?
He he, you must be 70 steve :laugh:
Quotewell i grew up with 4-5 channels of sd so im sure i can live with it again lol
Agree, its not the end of the world, but if I could live with it & just give up, I wouldn't be in this hobby!
Buddy, this is not rocket science.. If you know the old one & the new one, just rename to suit.. Make sure you are not renaming a Symbolic link (This might be used depending on the picon set)
Quotealbi HD gone.....its rolling out now lol
Not for me
Quoteanyway...i dont kn ow why everyone is getting in a flap, even if 5ky was all blacked out you still have plugins like 1channel and tsmedia to watch films and tv shows
A lot of the content from those plugins are ripped from sat/cable so if more providers keep going black, there will be less & less content uploaded..
It would be Suicide for anyone to show their hands before the full system is rolled out..