Posts by sebus

Nice for you but does not help me much.

Then it must be somehow my config, but really do not know which part of it

oscam.conf
disablecrccws                 = 1
disablecrccws_only_for        = 098C:000000;09C4:000000;098D:000000;0500:030B00,032830,041950,042800,042820,050F00;1810:000000;1811:003311,003315;1819:00006D;1884:000000;1708:000000;0E00:000000;09BE:000000;092B:000000;1803:000000;1843:000000

oscam.dvbapi
P: 1884:000000 # NC+

oscam.server
disablecrccws_only_for        = 1811:003311,023311,003315,003341,00331B,000007,000107;0500:030B00,032830,041950,042800,042820,050F00;1817:000000,00006A;1818:000000,00006C,000007;1819:00006D,000007;09CD:000000;098C:000000;098D:000000;09C4:000000;1708:000000;0E00:000000;092B:000000;1884:000000;1813:000068;0B01:000000

oscam.dvbapi
I: 186A
I: 1860
I: 0500:061200:08DE
I: 0500:061200:3B68
I: 0100:000068:3B68
I: 0B02:000000:3B68
I: 098D:000000
I: 0500:000000:1420
I: 0B01:000000:1420

P: 1884:000000:1420 # CANAL+ SPORT 2 HD [CANAL+]
P: 1884:000000:1434 # CANAL+ SPORT 2 HD [CANAL+]
P: 1884:000000:13EE # CANAL+ SPORT 2 HD [CANAL+]
P: 1843:000000 # SportDigital

P: 1814:000000 # Meo

P: 0B01:000000:3A9E # TVP Sport

P: 0B01:000000:3B67 # ES1 PL
P: 0B01:000000:3B68 # ES2 PL

P: 1803:000000 # Polsat
P: 0D98::10cc #Sportdigital HD
P: 1830 # HD01
P: 1843 # HD02
P: 09C4::14B7 #Puls4 HD

There is no priority anywhere in settings to be set

I do not want another image (I have limited time to play with it)

Picture from post #13 might in fact be correct (if rather confusing, as it looks like two separate LNB)

I am sure there is no user error in this case (it is extremely simple setup, 1:1)

What can I draw, honestly?

4 output universal quad LNB on motorized dish (2 outputs used), 1 direct cable to each tuner inside H7S

LNB out 1 -----> tuner A

LNB out 2 -----> tuner B

LNB out 3 -----> nothing

LNB out 4 -----> nothing

I already have latest image (none of the Pure2 did work previously, so do not expect anybody to fix anything, maybe just being pesymistic)

Anybody?

Used to work fine with

disablecrccws_only_for = 1884:000000

but now I only get few seconds & then hangs, if it comes at all, it is again few seconds & same all over again

2023/12/25 17:54:24 1B71FAD7 c   (dvbapi) Demuxer 0 restarting decoding requests after 1 ms with 1 enabled and 3 disabled ecmpids!
2023/12/25 17:54:24 1B71FAD7 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1884 PROVID 000000 ECMPID 0C82 ANY CHID PMTPID 041C VPID 00A1
2023/12/25 17:54:25 1B71FAD7 c      (ecm) mguser (1884&000000/0000/1420/8F:04708FF3ACE9EB4153E2E7A3474B9C74): rejected  (466 ms) by Reader-2 (F/2/2/2) - CANAL+ SPORT 2 HD
2023/12/25 17:54:25 1B71FAD7 c      (ecm) mguser (1884&000000/0000/1420/8F:04708FF3ACE9EB4153E2E7A3474B9C74): rejected  (1 ms) by Reader-2 (F/2/2/2) - CANAL+ SPORT 2 HD

Provider has no idea.

Already on latest Pure2 for Zgemma H7 & OSCam_11.726-r798

All other channels clear fine

Anybody has any ideas?

Thanks

sebus

HOW is the restart of the router supposed to fix oscam issue? It is like saying "restart the car engine because breaks do not work". Just makes no sense...

Pure2 updated to latest

Do not fancy another image

The above image is irrelevant (I have single LNB with multiple outputs)

Whats coul I draw?

4 way LNB, 1 direct cable goes to tuner A, second direct cable goes to tuner B

H7S has only a single port per each tuner, so impossible to connect in any other way

Tuner A = USALS

Tuner B = Second cable from motorized LNB

There are no settings for power anywhere I can see

Anybody at all has any ideas?

Eventually got round to doing it, installed PurE2 latest: zgemmah7-PurE2-7.3-20230818_multi to Slot2

The behaviour is EXACTLY the same, I can watch a channel on TV & stream another to PC ONLY if they both come from same transponder

If they are on different transponders only the first channel wins (whichever one was accessed first, either on TV or via stream)

I have not tried other images yet

Debug log attached (configured debug logging, restarted UI, accessed one channel on TV, tried to stream another from VLC on PC which ofcourse failed)

sebus

Nobody any more ideas? Can somebody actually confirm it working?

Quote from georgeflu

Quote

TunerA = positioner

TunerB = second cable from ... ????

from tuner A or from satellite???

i think your problem is in the tuner2 setup (cable from... except if it is something else)

try to change the tuner 2 setup to "advanced" and add all your satellites . than just try to stream any channels from the same (to tuner A selected) satellite...

Display More

Still exactly the same, only channels from same transponder

With Tune B = Equal to Tuner A

I only get attempted movement from same to same satellite and it never locks on the signal

Nobody?

H7S on Alsat Superior Dark Motor with 80 cm mesh dish, running pure2 v6.2-002

Very old image but apart from issue below it does all I need it to (hence did not update)

Quad output LNB on a motor. One cable goes to TunerA via motor, second to TunerB direct

TunerA = positioner

TunerB = second cable from ...

Can watch/stream any single channel with no issue.

Can watch on tuner A but then can only stream on tuner B any channel from the same transponder of the A channel.

Should I be able to stream any OTHER channel (from same satellite ofcourse)

Thanks

sebus

Quote from teak-won-do

Ask your CCcam or Oscam provider

I have, reckons there is no problem. And it is true, but only using cccamd 2.3.8 (arm), no breaks at all

No matter what oscam I tried (currently OSCam: 1.20_svn Build: r11581)

But it works for any other CAID

Quote from teak-won-do

use this oscam.server:

and this oscam.conf

and this oscam.user:

and this oscam.dvbapi:

and all will run well, good luck

Display More

While it does clear, it stops every 10 seconds for 10 seconds, constantly

(ecm) mguser (09C4@000000/03DF/1194/A7:A78F2850783AFEE8DB02D82827F9C54E): found (411 ms) by Reader-1 (P/2/2/2) - SPORTDIGITAL FUSSBALL HD

You do have static IP on your home connection? If not, then worth getting one!

If so then you can make the STB available to internet (with port forwarding) locked to only your Public static home IP

Easiest, simplest, quickest

Otherwise search for "Guide to setting up an OpenVPN server on Vix"

You will need to change one site (either) IP addressing (as they can not be identical), and you can setup STB to be VPN Server (to which home client connects)

But personally I think it would be easier to have Raspberry Pi in the Office site as VPN server

I would like to be able to type the number & NEED to press OK for the zap to happen, or if ie. mistyped then Exit should ignore whole input (as if nothing happened) & stay on the channel it was.

I see everywhere discussion about Channel number zap timeout & Extended-NumberZap plugin (which works for the key presses timeout), but that is not what I want.

On my old VIX image Exit was working exactly that way (as described above)

Now if I want to go ie to 2806 & type 206 (missing the 8) motor will move to 206 (which is on another satellite), no matter if I press Exit

sebus

No, I have no plugins that relate to front panel display

menu/setup/system/front panel display/fp settings

has dim settings etc, but nothing to actually specify what to display.

And it does not seem to be installed as a plugin which could be uninstalled

And as to the logo, only option is to stick black tape over it (possibly internally, so it looks better)

LCD display is controlled by

/usr/share/enigma2/display/skin_display.xml

so one only needs to edit is as per this

My xml looks like that now. I have channel number while on & clock in Standby