Well, few that I watch, but quite "few" on the motor.
Still, would like something else but just time on LCD...
Well, few that I watch, but quite "few" on the motor.
Still, would like something else but just time on LCD...
Can one specify what to display on the front panel (Zgemma H7S)
Mine (no matter what skin) displays only time (and it would be nice to get ie Channel number while on)
sebus
Many thanks, that is some proper explanation!
PLi-FullHD is nice for what I need.
Now if I could only get the FP LCD to display channel number instead of just time... (where are any settings as to what to display?)
It does not seem to matter what skin I use on Zgemma H7S
New to Pure2 (used OpenVix for years)
Using for now single tuner
I used to have channel preview in channel list, so could just press Exit to get back to what I was on (used to quickly check ie score in match on another channel)
But in P2 I have only full channel underneath channel list & no preview
Maybe that is me not knowing how to setup P2 or maybe it is impossible in this image?
sebus
Arm is not 2.3.8, but 2.3.2 & does not open S*y DE
Is it likely that there will be 1.45c for ARM processor?
The MIPS version works great for S*y DE (and anything else with cccam protocol)
While it clears, it freezes every few seconds, no matter if stays on same reader or swapping. Using 11517 from #30
(ecm) mguser (098C@000000/0135/007A/9F:2102B196BA9D2E41A63F2CFA25850DC6): found (206 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:1A4F8C8F8BFE06FEC38C2D797852F880): found (208 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:C0853D0EF2F6F0E3DC0F75B4C62B9BAA): found (227 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:072DDB30C3F131755CC7E993F67118E5): found (208 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:3057FDE0A3332ED2F9569CF0D2C04211): found (213 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:CA37C4007256975C2C8B774244113937): found (231 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:809B0F426B455137FC2B1F49497FAB87): found (190 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:750875895CF43FC235BCE60123731DC8): found (232 ms) by Reader-2 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:7CFEC24F9FA0F9F2D197F4C74A6F44FD): found (208 ms) by Reader-1 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:6413E179A96A75A181086186051B6508): found (203 ms) by Reader-1 (P/2/2/2)
(ecm) mguser (098C@000000/0135/007A/9F:278BBB99D4A53976F1637826D9AA0E28): found (192 ms) by Reader-2 (P/2/2/2)
Display More
I know that is massively old thread, but I have the same with Conax 0B01 card. Can read entitlements, but nothing clear, exactly as in this post
Any ideas anybody? oscam 9909
sebus
Got same message from Gigable 800 SE with Openvix 3
Card reader configured for Oscam with mgcam 1.38 (with newcamd protocol)
But I only get this error if DVB-Api is enabled
But without DVB-Api enabled, local card is not used.
So I just followed tutorial (first hit in Google) "Connect OScam with MGcamd" (changed newcamd to cccam) and...
No more errors in Oscam
sebus
Try setting the box type in mg_cfg to # 06 dreambox/mips
Thanks master G, could not get mgcamd working on my Gigablue, and your config made all the difference!
sebus
You could do it for free with dreambox-restream
or maybe even EnigmaTV
I belive even now Wowza does not ingest streams over http as per this
Translation needs to be improved, way too many Spanish words in settings all over
Thanks, good to have the assurance!
Yes, the images pops out daily (I am sure it is automated robot that does compiling from the git code)
OK, I see it is WOS then if one wants openvix image
sebus
Some images still appear around (what new is in them?) like openvix-3.0.539-gb800se_usb or openaaf-2.0-gb800se-20130124_usb
but it seems that not much interest any more in this box.
Any special things happened in the last few months?
Still running on April 2012 image & honestly, it does all that could do well since always, which is display HD
sebus
Dreamset Settings Editor is the easiest IMO
OK, thanks, that is a newer version of April bootloader (which was needed for 3.1 kernel image)
Which I did not bother to install, as my box with latest openAAF 1.0 with 2.6 kernel does pretty much all I need it to.
1.0 version had only 3 files (vmlinux.gz, burn.bat, rootfsn.img), 2.0 version has 5 files (kernel.bin, rootfs.bin, splash.bin, noforce, imageversion)
It seems that the current openaaf 2.0 is the same image structure as OpenAAF/OpenPLI images were, which need this burn.bat:
macprog2 AC-DB-EF-11-22-33
flash -noheader -forceerase usbdisk0:gigablue/se/kernel.bin nandflash0.kernel
flash -noheader -forceerase usbdisk0:gigablue/se/rootfs.bin nandflash0.rootfs
setenv -p STARTUP "boot -z -elf nandflash0.kernel:"
boot -z -elf nandflash0.kernel:
Display More
sebus
Is there any new booloader for this image?
And how does this image get applied? Nightly come with NO instructions of any kind...
Thanks
sebus
And is there any new bootloader for it?
sebus