GB is OK, does all that it is supposed to. Some parts are better then others, but for the money you can't fault it
All it needs is more support, few images around, but for the last 3 months not much really is happening...
sebus
GB is OK, does all that it is supposed to. Some parts are better then others, but for the money you can't fault it
All it needs is more support, few images around, but for the last 3 months not much really is happening...
sebus
A normal manufacturer cycle, spit more hardware faster, so people will buy it, and in the meantime completely forget that for hardware to be successful, the software that drives it must be good (and that surely did not happen with solo or se)
sebus
OK, I honestly do not have the time to test the images. Some openAAF image works for me (opens all I need), so I will lave it & wait till there is really something ground breaking
sebus
Do these daily updates have anything good in them?
sebus
Adjust to your liking
#!/bin/sh
remove_tmp () {
rm -rf /tmp/.oscam /media/usb/oscam/*
}
case "$1" in
start)
remove_tmp
sleep 3
exec start-stop-daemon -S -x /usr/bin/oscam -- -b -r 2 -c /etc/tuxbox/config/oscam
exit
;;
stop)
exec start-stop-daemon -K -R 2 -x /usr/bin/oscam &
sleep 2
killall -9 oscam 2>/dev/null
sleep 2
remove_tmp
sleep 2
exit
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "6686"
;;
info)
echo "oscam6686"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
Display More
I mean later like in 10 min time.
So it starts not being there and 10 min later it is there
channel settings must be fine, as the channel is received just fine...
sebus
Would like to know the answer, but for now it was just easier to get the provider to change it to 1803
sebus
Yes, as far as I know c-line with 1801 will not clear with cccam., it needs oscam
But I need cccam running as well for all the other shares to clear
sebus
If one gets c-line with Polsat CAID 1803 then it is not a problem with cccam
But with 1801 one needs to use it via oscam (as far as I can understand various post elsewhere)
I can not figure out how (single c-line can only connect once, so if oscam connects to remote host, then cccam will not)
So far I can not clear any Polsat 1801 channels
sebus
FTA Rai Sport 1
EPG does not show on this channel (plus few others)
And in web interface instead of being able to click on a channel (to watch on PC) I have "Nothing running"
The later it the EPG appears & channel is again selectable
Latest kernel 2.6 openAAF image
Anybody know why that happens?
sebus
You can place the config file wherever, that is why you use -c
Tested with latest 6665, but same error exists
There is a thread about it, the guy made Dreambox executable, but that does not work on GB
sebus
It is TnK Conax card in a slot.
The card was already activated, but while playing with settings it did update the entitlement (from month to next) fine & it clears the channels.
Did not yet try the never version of oscam (will do & report back)
It almost seems that the message does nothing bad & is just a message
sebus
I have errors showing in log, but the card works OK, channels clear, AU works
Anybody has an idea? oscam Version: 1.20-unstable_svn Rev. 6642 mips
2012/05/03 18:48:23 578530 r ERROR in IO_Serial_Read (errno=0 Success)
2012/05/03 18:48:23 578530 r ATR is malformed, it reports 15 historical bytes but there are only 1
2012/05/03 18:48:23 578530 r ATR: 19 6F 3B 68 D9
2012/05/03 18:48:23 578530 r ERROR: Could not read reader->convention
2012/05/03 18:48:23 578530 r Error activating card.
2012/05/03 18:48:24 578530 r ERROR in IO_Serial_Read (errno=0 Success)
2012/05/03 18:48:24 578530 r ATR: 3B 24 00 30 42 30 30
2012/05/03 18:48:25 578530 r ERROR in IO_Serial_Read (errno=0 Success)
2012/05/03 18:48:25 578530 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/05/03 18:48:26 578530 r type: Conax, caid: 0B00, serial: xxxxxxxxxxx, hex serial: xxxxxxxxxx, card: v64
2012/05/03 18:48:26 578530 r Providers: 1
2012/05/03 18:48:26 578530 r Provider: 1 Provider-Id: 000000
2012/05/03 18:48:26 578530 r Provider: 1 SharedAddress: 003BA0F9
2012/05/03 18:48:26 578530 r found cardsystem conax
2012/05/03 18:48:26 578530 r Package: 1, id: 1010, classes: 01000003, date: 2012/05/01 - 2012/05/31, name: TVN
2012/05/03 18:48:26 578530 r Package: 2, id: 1010, classes: 01000003, date: 2012/04/01 - 2012/04/30, name: TVN
2012/05/03 18:48:26 578530 r [conax-reader] ready for requests
2012/05/03 18:48:27 0 s init for all local cards done
Display More
OpenMips is most likely the way to go. Read that it is very stable (29042012 image at least)
I loaded latest 28.04.2012 openAAF 2.6 kernel image, adjusted it to my liking:
cccam 2.3
Catseye E2 Settings File
Minicats_Key_Bundle.zip
oscam-svn6642-mips-tuxbox-webif-Distribution.tar
enigma2-plugin-extensions-startuptostandby_experimental-git20120430-r0_mipsel.ipk
gb800se-extensions-fullbackup_0.2_mipsel.ipk
Does all I need it for.
Does not play mp3/aac sound via optical from avi,
does not allow easy weather settings adjustment,
too many German words in various settings,
does not play internet radio if it is in .ogg format
All in all not bad unit, which requires lots more support, whichever image you chose, unless source becomes completely open - which might happen with openmips
sebus
Using this & DM800 OsCam_CCcam MgCamd P2C TnK gotowiec
I have this card working fine with oscam to cccam
sebus
Anybody has E2 oscam config for TnK (Telewizja na karte) SD card?
This card is not in Configs section
Thank
sebus
Not really, do not need DVB-T at all, it is more just a curiosity
I assume the situation is "as it stands", surely it is only drivers issue? which will be rectified in due course...
sebus